Weidou Intelligent Technology (Shanghai) Co., Ltd.
中文
WDUTECH industrial automation products and services
Categories and filters

Home/Products/ Electrical and Electronic Components

schell-connect electrical components Germany schell-connect model schell-connect price

schell-connect electrical components Germany schell-connect model schell-connect price

schell-connect electrical component is a varactor diode, also known as a "variable reactance diode," made using the characteristic that the junction capacitance of a PN junction changes with applied voltage when reverse-biased. As the reverse bias voltage increases, the junction capacitance decreases; conversely, the junction capacitance increases. The capacitance of a varactor diode is generally small, with a maximum value ranging from tens of pF to hundreds of pF. It is mainly used in high-frequency circuits for automatic tuning, frequency modulation, and phase adjustment, such as serving as a variable capacitor in the tuning circuit of a television receiver. Main parameters include: zero-bias junction capacitance, zero-bias quality factor, and reverse breakdown.

SKU
_P004835687
Category
Electrical and Electronic Components
Tags
Connectors / Cable / Switch / Relay / Controller / Germany schell-connect
schell-connect electrical component is a varactor diode, also known as a "variable reactance diode," made using the characteristic that the junction capacitance of a PN junction changes with applied voltage when reverse-biased. As the reverse bias voltage increases, the junction capacitance decreases; conversely, the junction capacitance increases. The capacitance of a varactor diode is generally small, with a maximum value ranging from tens of pF to hundreds of pF. It is mainly used in high-frequency circuits for automatic tuning, frequency modulation, and phase adjustment, such as serving as a variable capacitor in the tuning circuit of a television receiver. Main parameters include: zero-bias junction capacitance, zero-bias quality factor, reverse breakdown voltage, center reverse bias voltage, nominal capacitance, capacitance variation range (in picofarads), and cutoff frequency.


schell-connect electrical component structure


The simplest switch consists of two metal pieces called "contacts." When the two contacts touch, they form a current loop; when they do not touch, the current path is open. When selecting contact metals, their resistance to corrosion must be considered, because most metals form insulating oxides after oxidation, preventing the contacts from functioning properly. Selection of contact metals must also consider factors such as electrical conductivity, hardness, mechanical strength, cost, and toxicity. Corrosion-resistant metals are sometimes plated onto the contacts. Plating is generally applied to the contact surfaces to prevent performance degradation due to oxides. Sometimes non-metallic conductive materials, such as conductive plastics, are used for the contact surfaces. In addition to contacts, switches contain movable parts that make or break the contact connection. Switches can be classified into lever switches, push-button switches, rocker switches, etc., based on the type of movable part, which can also be other forms of mechanical linkages.


schell-connect electrical component characteristics


Resolution refers to the ability of a sensor to detect the smallest change in the measured quantity. That is, if the input changes slowly from a non-zero value, the sensor output will not change until the input change exceeds a certain value, meaning the sensor cannot resolve changes below this threshold. Only when the input change exceeds the resolution does the output change. Typically, the resolution varies at different points within the full-scale range of a sensor. Therefore, the maximum change in input within the full scale that causes a step change in output is commonly used as the indicator for resolution. If this indicator is expressed as a percentage of the full scale, it is referred to as resolution. Resolution has a negative correlation with sensor stability.


schell-connect electrical component structure


A generator typically consists of components such as the stator, rotor, end covers, and bearings. The stator is composed of the stator core, windings, frame, and other structural parts that secure these components. The rotor consists of the rotor core (or magnetic poles, yoke), windings, retaining rings, centering rings, slip rings, fan, and shaft. Bearings and end covers connect and assemble the stator and rotor of the generator, allowing the rotor to rotate within the stator. This motion cuts magnetic flux lines, thereby generating induced electromotive force, which is led out through terminal blocks and connected to the circuit to produce current.



Weidou Intelligent Technology specializes in selling German schell-connect connectors, schell-connect switches, schell-connect relays, schell-connect controllers, schell-connect plugs, schell-connect sensors, schell-connect resistors, schell-connect capacitors, schell-connect buses, schell-connect modules, schell-connect cables, schell-connect power supplies, schell-connect interfaces, schell-connect gateways, schell-connect circuit breakers, schell-connect original imports from Germany. We welcome inquiries and orders from customers.





Recommended products