Selas electrical components German Selas models Selas prices

Selas electrical components is a general term for all single components based on semiconductor materials, including diodes, transistors, field-effect transistors, and thyristors (the latter three are all three-terminal devices) made from various semiconductor materials. A transistor is a semiconductor device commonly used as an amplifier or an electronically controlled switch. Transistors are the basic building blocks for the standard operation of computers, mobile phones, and all other modern electronic circuits. Due to their fast response speed and high accuracy, transistors can be used for a wide variety of digital and analog functions, including amplification, switching, voltage regulation, signal modulation, and oscillation. Transistors can be packaged individually or as part of an integrated circuit in a very small area that can accommodate one hundred million or more transistors.

Selas electrical component operating principle

Light emission principle of laser diodes: The P-N junction in a laser diode is formed by two doped gallium arsenide layers. It has a parallel-end structure, parallel to a mirror at one end (highly reflective surface) and a partially reflective surface at the other. The wavelength of the emitted light is directly related to the length of the junction. When the P-N junction is forward-biased by an external voltage source, electrons move through the junction and recombine as in a conventional diode. When electrons recombine with holes, photons are released. These photons strike atoms, causing more photons to be released. As the forward bias current increases, more electrons enter the depletion region, leading to the emission of more photons. Eventually, some photons drifting randomly within the depletion region strike the reflective surface perpendicularly and are reflected back along their original path. The reflected photons are again reflected back from the other end of the junction. This movement of photons from one end to the other occurs continuously multiple times. During the photon movement, due to the avalanche effect, more atoms release more photons. This process of reflection and generation of increasing numbers of photons produces a very intense laser beam. Each photon generated in the emission process described above is identical to other photons in energy level, phase relationship, and frequency. Therefore, the emission process yields a laser beam of a single wavelength. To generate a laser beam, the current of the laser diode must exceed a certain threshold level. Current below the threshold level forces the diode to behave as an LED, emitting incoherent light.

Selas electrical component operating principle

When the voltage applied to a varistor is below its threshold, the current flowing through it is extremely small, making it equivalent to a resistor with infinite resistance. In other words, when the voltage applied across it is below its threshold, it acts like a switch in the open state. When the voltage applied to a varistor exceeds its threshold, the current flowing through it surges, making it equivalent to a resistor with near-zero resistance. In other words, when the voltage applied across it is above its threshold, it acts like a switch in the closed state. Protection principle of surge absorbers: In the standby state, the varistor has very high impedance (several megaohms) relative to the protected electronic components and does not affect the characteristics of the original design circuit. However, when an instantaneous surge voltage appears (exceeding the breakdown voltage of the surge absorber), the impedance of the surge absorber drops low (only a few ohms), causing a short circuit in the line, thereby protecting electronic products or more expensive components.

Selas electrical component classification

Generator classifications include: (1) Generators are divided into DC generators and AC generators; (2) AC generators are divided into synchronous generators and asynchronous generators (rarely used); (3) AC generators can also be divided into single-phase generators and three-phase generators. There are many types of generators. Based on principle, they are divided into synchronous generators, asynchronous generators, single-phase generators, and three-phase generators. Based on the method of generation, they are divided into steam turbine generators, hydroelectric generators, diesel generators, gasoline generators, etc. Based on energy source, they are divided into thermal power generators, hydropower generators, etc.

Weidou Intelligent Technology specializes in selling German Selas connectors, Selas switches, Selas relays, Selas controllers, Selas plugs, Selas sensors, Selas resistors, Selas capacitors, Selas buses, Selas modules, Selas cables, Selas power supplies, Selas interfaces, Selas gateways, Selas circuit breakers, Selas original imports from Germany. We welcome inquiries and orders from users.