SMAR Technology electrical components Germany SMAR Technology model SMAR Technology price

SMAR Technology electrical components are devices that convert electrical energy into mechanical energy. They utilize energized coils (i.e., stator windings) to generate a rotating magnetic field, which acts on the rotor (such as a squirrel-cage closed aluminum frame) to form electromagnetic rotational torque. Motors are classified into DC motors and AC motors based on the power supply used. Most motors in power systems are AC motors, which can be synchronous or asynchronous (the speed of the motor's stator magnetic field does not remain synchronized with the rotor's rotational speed). A motor mainly consists of a stator and a rotor. The direction of force-induced motion of current-carrying conductors in a magnetic field depends on the direction of the current and the direction of the magnetic flux lines (magnetic field direction). The working principle of a motor is that the magnetic field exerts force on the current, causing the motor to rotate.

SMAR Technology electrical component characteristics

Operating characteristics: The main characteristics characterizing the performance of a synchronous generator are the no-load characteristic and the load operating characteristic. These characteristics are important bases for users when selecting generators. No-load characteristic: When the generator is not connected to a load, the armature current is zero; this is called no-load operation. Armature reaction: When the generator is connected to a symmetrical load, the three-phase currents in the armature windings produce another rotating magnetic field, known as the armature reaction magnetic field. Its rotational speed is exactly equal to the rotor speed, and the two rotate synchronously. The armature reaction magnetic field of a synchronous generator and the rotor excitation magnetic field can both be approximately considered to be distributed according to a sinusoidal law. The spatial phase difference between them depends on the time phase difference between the no-load electromotive force E1 and the armature current I. The armature reaction magnetic field is also related to the load condition. When the generator load is inductive, the armature reaction magnetic field has a demagnetizing effect, which causes the generator voltage to decrease; when the load is capacitive, the armature reaction magnetic field has a magnetizing aid effect, which causes the generator output voltage to increase. Load operating characteristics: These mainly refer to the external characteristic and the adjustment characteristic. The external characteristic is the relationship between the generator terminal voltage U and the load current I when the speed is at the rated value, and the excitation current and load power factor are constant. The adjustment characteristic is the relationship between the excitation current If and the load current I when the speed and terminal voltage are at rated values, and the load power factor is constant.

SMAR Technology electrical component parameters

The main parameters of a potentiometer include nominal resistance, rated power, resolution, sliding noise, resistance variation characteristic, wear resistance, zero-position resistance, and temperature coefficient. 1. Rated power: The maximum power allowed to be dissipated across the two fixed terminals of a potentiometer is the rated power of the potentiometer. During use, note that the rated power is not equal to the power between the center tap and a fixed terminal. The rated power of a potentiometer refers to the maximum power allowed to be consumed under long-term continuous load at the specified rated temperature, when the atmospheric pressure is 87~107kPa. 2. Nominal resistance: The nominal resistance value marked on the product, whose series is similar to that of resistors. 3. Permissible tolerance class: The error range between the measured resistance and the nominal resistance allows for errors of 20%, 10%, 5%, 2%, and 1% depending on the precision class. The precision of precision potentiometers can reach 0.1%. 6. Resistance variation law: This refers to the relationship between the resistance change and the rotation angle (or sliding travel) of the wiper contact. This relationship can take any functional form; commonly used types are linear, logarithmic, and reverse logarithmic (exponential). In use, linear potentiometers are suitable for use as voltage dividers; reverse logarithmic (exponential) potentiometers are suitable for volume control in radios, tape recorders, phonographs, and televisions. If a replacement of the same type is not available during maintenance, a linear type may be used as a substitute, but a logarithmic type should not be used. Logarithmic potentiometers are only suitable for tone control, etc.

SMAR Technology electrical component usage

1. Apply moderate force when tightening wiring connections to prevent stripping the threads of bolts and nuts due to excessive force. Replace any bolts and nuts with stripped threads immediately; do not continue working with compromised fasteners. 2. When using a screwdriver to tighten or loosen screws, apply firm pressure to keep the screwdriver tip engaged with the screw head before tightening or loosening, to prevent slipping that could damage the screw and make disassembly difficult, especially for common circuit breakers inside distribution boxes. 3. If bolts or nuts are difficult to remove, do not act rashly to avoid deformation that would make removal even harder. Tap them appropriately or apply a screw loosening agent or dilute hydrochloric acid, then attempt removal after a short wait. 4. Do not use pliers to tighten or loosen bolts and nuts to prevent damage. When using an adjustable wrench, adjust the jaw opening properly to avoid damaging or deforming the bolts and nuts, which would make disassembly difficult. 5. A single terminal block allows connection of at most two wires of the same type and specification. 6. For terminal blocks prone to loosening or poor contact, wire ends must be secured in a "U" shape on the terminal block to increase contact area and prevent loosening. 7. When connecting wire ends or cable lugs to each other, it is strictly prohibited to install non-copper washers or washers with poor conductivity in between. 8. When connecting wire ends, the contact surfaces must be smooth and free of oxidation. When connecting cable lugs or copper bars, apply conductive paste to the cleaned contact surfaces before tightening. 9. When connecting temporary wiring, single-strand flexible wires require the wire end to be folded once before connecting to the lower terminal of the circuit breaker; single-core solid wires must be connected to the lower terminal of the circuit breaker in a "U" shape. 10. For high-voltage motor wiring, it is required that no washers with poor conductivity, such as galvanized nuts, flat washers, or spring washers, be interposed between the motor output leads and the cables connecting to the motor. 19. When using insulating tape to wrap cables or other equipment requiring insulation protection, the insulating layer must be wrapped from one end to the other with significant overlap, making at least one round trip.

Weidou Intelligent Technology professionally sells German SMAR Technology connectors, SMAR Technology switches, SMAR Technology relays, SMAR Technology controllers, SMAR Technology plugs, SMAR Technology sensors, SMAR Technology resistors, SMAR Technology capacitors, SMAR Technology buses, SMAR Technology modules, SMAR Technology cables, SMAR Technology power supplies, SMAR Technology interfaces, SMAR Technology gateways, SMAR Technology circuit breakers, SMAR Technology original imports from Germany. Customers are welcome to inquire and place orders.