zevatron electrical components Germany zevatron model zevatron price

zevatron electrical components are parts that connect the battery to external conductors. In electrical engineering, terminals mostly refer to wiring ends, also called terminal blocks. Types include single-hole, double-hole, socket, hook, etc. By material, they are classified as silver-plated copper, galvanized copper, copper, aluminum, iron, etc. Their main function is to transmit electrical signals or conduct electricity. In engineering, it is the interface reserved by pre-station works for post-station works, and is the embedded facility for post-station interface works. When observing objects with a terminal cross-section inspection microscope, it can produce an upright three-dimensional spatial image with strong stereoscopic effect, clear and wide imaging, and has a long working distance; equipped with a high-precision harness terminal image measurement and analysis system, combined into a harness terminal inspection microscope, the perfect combination of high-quality optical system and high-resolution camera makes the cross-section image clearer, and the unique fixed magnification and fixed grade make the measurement more accurate. To detect whether the terminal crimping is good or not, professional testing equipment is required for detection. Commonly used terminal testing equipment includes: terminal cross-section analyzer

zevatron electrical component principle

Its operating principle is the same as that of a transformer, with a basic structure consisting of an iron core and primary and secondary windings. It is characterized by a very small and relatively constant capacity, operating close to no-load conditions during normal operation. The impedance of the voltage transformer itself is very small; once a short circuit occurs on the secondary side, the current will increase sharply and burn out the windings. For this reason, fuses are connected to the primary side of the voltage transformer, and the secondary side is reliably grounded to prevent high potential to ground on the secondary side in case of insulation damage between the primary and secondary sides, which could cause personal injury and equipment accidents. Voltage transformers for measurement are generally made with a single-phase double-winding structure. The primary voltage is the voltage to be measured (such as the line voltage of the power system). They can be used in single phase, or two units can be connected in V-V configuration for three-phase use. Voltage transformers used in laboratories often have multiple taps on the primary side to accommodate the need to measure different voltages. Voltage transformers for protective grounding also include a third winding, known as a three-winding voltage transformer. The third windings of the three phases are connected in an open-delta configuration. The two output terminals of the open delta are connected to the voltage coil of the ground protection relay. During normal operation, the three-phase voltages of the power system are symmetrical, and the sum of the three-phase induced electromotive forces on the third winding is zero. Once a single-phase ground fault occurs, neutral point displacement occurs, and zero-sequence voltage appears between the terminals of the open delta, causing the relay to operate and thus protecting the power system. When zero-sequence voltage appears in the windings, corresponding zero-sequence flux appears in the iron core. Therefore, this type of three-phase voltage transformer uses a side-yoke iron core or employs three single-phase voltage transformers. For this type of transformer, the accuracy requirement for the third winding is not high, but it requires certain over-excitation characteristics (i.e., when the primary voltage increases, the magnetic flux density in the iron core increases by a corresponding factor without damage). Voltage transformers are indispensable electrical devices in power transmission and supply systems such as power plants and substations. Precision voltage transformers are instruments used in electrical testing laboratories to extend measurement ranges for measuring voltage, power, and electrical energy. Voltage transformers are very similar to transformers, both being used to transform voltage on lines. Why is voltage transformation needed on lines? This is because, depending on the different conditions of power generation, transmission, and consumption, the voltage levels on lines vary significantly, ranging from low voltages such as 220V and 387V to high voltages of tens of thousands or even hundreds of thousands of volts. To directly measure these low and high voltages, corresponding low-voltage and high-voltage voltmeters and other instruments and relays would need to be manufactured according to the line voltage levels. This would not only create significant difficulties in instrument manufacturing, but more importantly, it is impossible and absolutely prohibited to directly manufacture high-voltage instruments and measure voltage directly on high-voltage lines.

zevatron electrical component composition

1. Generally, a fuse consists of three parts: First is the fusible element part, which is the core of the fuse and plays the role of cutting off the current when it melts. For fuses of the same type and specification, the fusible elements must have the same material, the same geometric dimensions, as small and consistent resistance values as possible, and most importantly, consistent fusing characteristics. Household fuses are commonly made of lead-antimony alloy. Second is the electrode part, usually two, which is an important part connecting the fusible element to the circuit. It must have good conductivity and should not produce significant installation contact resistance. Third is the bracket part. The fusible element of a fuse is generally slender and soft. The role of the bracket is to fix the fusible element and make the three parts a rigid whole for easy installation and use. It must have good mechanical strength, insulation, heat resistance, and flame retardancy, and should not produce phenomena such as fracture, deformation, combustion, and short circuit during use. 2. Arc extinguishing device: Fuses used in power circuits and high-power equipment not only have the three parts of general fuses but also have an arc extinguishing device. This is because the circuits protected by such fuses not only have large operating currents, but also have high voltage across their ends when the fusible element melts. Often, the fusible element has melted (fused) or even vaporized, but the current has not been cut off. The reason is that arcing occurs between the two electrodes of the fuse under the action of voltage and current at the moment of fusing. This arc extinguishing device must have strong insulation and good thermal conductivity, and be negatively charged. Quartz sand is a commonly used arc extinguishing material. 11. Fusing indication device: Some fuses have a fusing indication device. Its function is that when the fuse operates (melts), its appearance changes to a certain extent, making it easy for maintenance personnel to discover, such as emitting light, changing color, or popping out a solid indicator.

zevatron electrical component principle

The Hall voltage changes with the change of magnetic field strength; the stronger the magnetic field, the higher the voltage; the weaker the magnetic field, the lower the voltage. The Hall voltage value is very small, usually only a few millivolts, but after being amplified by the amplifier in the integrated circuit, the voltage can be amplified enough to output a stronger signal. To make the Hall integrated circuit play a sensing role, mechanical methods are needed to change the magnetic field strength. A rotating impeller is used as a switch to control magnetic flux. When the impeller blades are in the air gap between the magnet and the Hall integrated circuit, the magnetic field deviates from the integrated chip, and the Hall voltage disappears. In this way, the change in the output voltage of the Hall integrated circuit can indicate a certain position of the impeller drive shaft. Using this working principle, the Hall integrated circuit chip can be used as an ignition timing sensor. Hall effect sensors belong to passive sensors; they require an external power supply to work. This characteristic enables them to detect low-speed operating conditions.

Weidou Intelligent Technology professionally sells German zevatron connectors, zevatron switches, zevatron relays, zevatron controllers, zevatron plugs, zevatron sensors, zevatron resistors, zevatron capacitors, zevatron buses, zevatron modules, zevatron cables, zevatron power supplies, zevatron interfaces, zevatron gateways, zevatron circuit breakers, zevatron original imports from Germany. Welcome users to consult and order.