bosche bosche platform load cell H10A for confined installation spaces

Weidou Intelligent Technology (Shanghai) Co., Ltd. is a professional agent and distributor of German Bosche load cells and bosche platform load cells. Some commonly used Bosche load cells are kept in stock. Customers are welcome to inquire and place orders. H10A is a flat load cell made of aluminum. It is suitable for small, low-cost platform scales with a single load cell and III class commercial scales. The compact, flat design is suitable for applications with limited installation space, such as equipment technology. As standard, the H10A load cell is tested and optimized for corner load sensitivity. This means that no measurement errors occur even if the platform is loaded at only one corner.The H10A load cell can be calibrated up to 3000D in accordance with OIML and R60, providing extremely precise and repeatable measurement results even during long-term use. The measuring body is made of aluminum, and the strain gauges are encapsulated. The single-point load cell meets the requirements of protection class IP65.

Scope of application

Small platform scales, retail scales, counting scales, gas cylinder scales, postal scales, filling and metering scales, checkweighers,

In logistics, this type of load cell is commonly used in automated storage systems. In the pharmaceutical industry, it is used to monitor the pressure of tablet presses,

Construction

These load cells operate on the principle of a double bending beam, ensuring accurate measurement. The design is insensitive to eccentric force application and can withstand both compression and tension. Threaded holes for connecting the sensor or for defined force introduction facilitate assembly.

Features

Material: Aluminum

Rated load: 8 - 40 kg

Accuracy class C3, Y = 10,000

Can be calibrated to 3000D in accordance with OIML R60; Test certificate number: DK0199-R60-12.15

Structure: Measuring element encapsulated, Protection class: IP65

Compensation for corner load errors

Maximum platform size: 300 x 300 mm

Low construction height

Compatible with other manufacturers

Construction

The load cell is screwed onto two steel or aluminum plates (max. 300 x 300 mm) via two threaded faces at the front top and rear bottom, and connected to the corresponding scale indicator or measuring amplifier. To avoid overload, the spring deflection (bending) of the load cell should be limited by mechanical overload stops. These mechanical stops should be located directly below the load cell or below the platform corner points.Only balanced outputs (nominal value and output resistance) allow multiple platform load cells to be connected in parallel.

Specifications and models

Model        Rated load, Emax          Accuracy class

bosche platform load cell H10A-C3-0008 8 kg C3

bosche platform load cell H10A-C3-0010 10 kg C3

bosche platform load cell H10A-C3-0015 15 kg C3

bosche platform load cell H10A-C3-0020 20 kg C3

bosche platform load cell H10A-C3-0030 30 kg C3

bosche platform load cell H10A-C3-0035 35 kg C3

bosche platform load cell H10A-C3-0040 40 kg C3

Features

Accuracy class: C3 (according to OIML R 60)

Rated load (Emax): 8 kg, 10 kg, 15 kg, 20 kg, 30 kg, 35 kg, 40 kg

Number of verification scale intervals (nLC): 3000

Nominal value (Cn): 2.0 mV/V

Tolerance of characteristic values: ± 0.2 mV/V

Characteristic value relative to minimum verification scale interval d. WZ (Y = Emax / vmin): 10,000% of Emax

Minimum preload (Emin): 0

Limit load (EL): 150% of Emax

Breaking load (Ed): 300% of Emax

Recommended supply voltage (Uref): 5 - 12 V.

Maximum permissible supply voltage (BU): 15 V.

Zero balance: ± 3% of rated output. cn

Input resistance at reference temperature (RLC): 404 ± 10 Ω

Output resistance at reference temperature (RO): 350 ± 3 Ω

Insulation resistance: > 2,000 MΩ

Cable length: 1 m

Nominal temperature range (BT): - 10 ... + 40 °C

Protection rating in accordance with (DIN 40.050 / EN 60529): IP 65

Material: Aluminum

Weidou Intelligent Technology (Shanghai) Co., Ltd. is a professional authorized distributor of German Bosche load cells and bosche platform load cells. Stock is available for some commonly used Bosche load cells. Customers are welcome to inquire and place orders.