Bosch Rexroth R900UP0486 Part No. R900UP0486 Clamping and Drive Module Distribution

R900UP0486 Bosch Rexroth UPE2 Clamping and Drive Module (51142) The IH15A control module is used to implement complete hydraulic control. They can be equipped and assembled individually. Directional valve modules and seat valve modules can be combined with each other, and the control module can be directly connected to the clamping and drive module UPE2. However, with the help of external accessory modules, the hydraulic control unit can also be installed in any system. The RBAIH15A type reduction module enables the IH15A module to be directly mounted on the container cover of conventional drives. Using the RIH15AR type pressure reducing module, the hydraulic control unit can be connected to the control devices of the IH15B control module series. This module is preferably designed for hydraulic control units of small-volume consumers with a volume flow not exceeding 764 l/min. They are interconnected by two tie rods. Clamping and drive module

R900UP0486 Overview of Accessory Modules for Clamping and Drive Modules

1) Basic module "G": – Basic module with integrated relief valve for simple lowering and holding functions. – If the basic module "G" is used, further stacking is not feasible. – For more details, see the sample "Control Block Types for Clamping and Drive Modules. IH15A". 2) Directional valve module "W" 1): – Design that allows control using valves with port mounting surfaces conforming to DIN 24340 form A. – The number of directional valve modules depends on the discharge volume and pump displacement. – For more details, see the sample "Control Block Types for Clamping and Drive Modules IH15A". 3) Seat valve module "S" 1): – The basic composition of the seat valve includes: • One relief valve block. • One or several control blocks. • One end block. – Control is designed according to the specific application. – The number of seat valve modules depends on the discharge volume and pump displacement. – For more details, see the sample "Control Block Types for Clamping and Drive Modules IH366A". Directional valve modules and seat valve modules can be combined!

R900UP0486 Clamping and Drive Module Design Types and Requirements

1) Toggle or elbow clamping device: This design utilizes the mechanical characteristics of the toggle to provide the clamping force required during material injection. Mechanical toggle clamping offers fast closing and opening speeds and is less expensive than other clamping devices. The main disadvantage is that the clamping force cannot be precisely controlled; for this reason, it is only suitable for small machines. 65) Hydraulic clamping device: These use fluid pressure to open and close the clamp and generate the clamping force required during material injection. The advantages of this design type are high reliability and precise control of clamping force. The disadvantages are that the hydraulic system is relatively slow and expensive compared to toggle clamping devices. After the mold opens, the molded part tends to shrink and stick to the mold core (usually the half-mold farthest from the injection unit), and must be demolded using an ejector plate provided by a mold system. Design requirements: The clamping effect of the clamping device will directly affect aspects such as workpiece machining quality, production efficiency, surface roughness, and labor intensity. Therefore, the following basic requirements should be followed when designing clamping devices. (1) During the clamping process, the workpiece must not move. The clamping device must ensure reliable positioning of all locating surfaces of the workpiece and must not change the correct position occupied by the workpiece after positioning. (2) Clamping deformation of the workpiece should be minimized as much as possible. This requires that the clamping force be appropriate; while ensuring the clamping force required for workpiece machining, it must not produce deformation unacceptable for machining precision. (3) The clamping device must be reliable and safe. This requires the clamping device to have sufficient clamping stroke and a reliable self-locking function. (4) The clamping device must be practical and economical. This requires the clamping action of the clamping device to be rapid, operation to be convenient and labor-saving, and it should be easy to manufacture and maintain, utilizing standardized components as much as possible.

R900UP0486 Clamping and Drive Module Motor

Clamping and drive modules are designed for short-time operation S2 and intermittent operation S3 duty cycles within the nominal power range, in accordance with VDE 0530 (EN 60034) standards. The motor conforms to insulation class F, and the entire clamping and drive module conforms to protection class IP 54. The direction of rotation of the motor depends on the installed pump (see "Technical Data" on page 4 for this point). Motor technical data Voltage 1) U V 230 / 400 ±6 % Δ/Y. Frequency f Hz 50 / 60. Duty cycle S2 short-time operation, S3 intermittent operation. Insulation class F (winding). Protection class IP 54. Number of poles 2 / 4. Electromagnetic compatibility of the equipment (EMVG): According to the provisions of the EEC directive "Act on Electromagnetic Compatibility of Equipment (Chapter 2, Section 4)", the clamping and drive module is not a ready-to-use device. To avoid potential electromagnetic interference, we recommend using interference suppression components manufactured by Murr-Elektronik company in 71570 Oppenweiler. For example, type 23050, 3 x 400 VAC, 50-411 Hz. Terminal assignment: Terminal assignment in the terminal box on the clamping and drive module.

Weidou Intelligent Technology specializes in selling Bosch Rexroth R900UP0486 Part No. R900UP0486 Clamping and Drive Modules, R900UP0486 Control Modules, R900UP0486 Drive Modules, R900UP0486 Clamping Modules, R900UP0486 Bosch Rexroth Modules, UPE2550 Clamping and Drive Modules, R900UP0486 Compact Modules, R900UP0486 Motor Modules, R900UP0486 Hydraulic Modules, R900UP0486 Directional Valve Modules, R900UP0486 Seat Valve Modules, IH2563MA Modules, IH2563EA Modules, R900UP0486 Indexing Modules, R900UP0486 Release Modules, R900UP0486 Original German Import. Welcome inquiries and orders from users.