Bosch Rexroth IH15MA-1X/WSED-1HED8/50/O/V Part No. R900700547 Clamping and Drive Module Distribution

R900700547 Bosch Rexroth UPE2 Control module for clamping and drive modules (51142) of type IH15A is used to implement complete hydraulic control. They can be equipped and assembled individually. Directional valve modules and seat valve modules can be combined with each other, and the control modules can be connected directly to the clamping and drive modules UPE2. However, with the aid of external accessory modules, the hydraulic control unit can also be installed in any system. The deceleration module of type RBAIH15A enables the IH15A module to be mounted directly on the container cover of conventional drives. Using the pressure reducing module of type RIH15AR, the hydraulic control unit can be connected to the control devices of the control module series IH15B. This module is preferably designed for hydraulic control units for small-volume consumers with a volume flow rate not exceeding 355 l/min. They are connected to each other by two tie rods. Clamping and drive module

R900700547 Overview of accessory modules for clamping and drive modules

1) Basic module "G": – Basic module with integrated relief valve for simple lowering and holding functions. – If the basic module "G" is used, further stacking is not feasible. – For more details, see catalog "Control block types for clamping and drive modules IH15A". 2) Directional valve module "W" 1): – Design that allows control using valves with port mounting surfaces conforming to DIN 24340 form A. – The number of directional valve modules depends on the discharge volume and pump displacement. – For more details, see catalog "Control block types for clamping and drive modules IH15A". 3) Seat valve module "S" 1): – The basic composition of the seat valve includes: • One relief valve block. • One or several control blocks. • One end block. – The control is designed according to the respective application. – The number of seat valve modules depends on the discharge volume and pump displacement. – For more details, see catalog "Control block types for clamping and drive modules IH57A". Directional valve modules and seat valve modules can be combined!

R900700547 Technical data for clamping and drive modules

When designing controllers with tanks, ensure that type-tested pressure relief valves protect the tank from impermissible overpressure. Type-tested pressure relief valves must not perform any control tasks, and the set pressure of the type-tested pressure relief valve must be less than or equal to the maximum allowable working pressure of the tank. When using modules SPDB and SPDR at 9 xp (minimum working pressure), a filter with a filtration fineness of 6 μm must be used. 1) Connection module type A (see page 74). 2) Connection module with pressure reducing valve type ADB (see page 75). 3) End module type E (see page 78). 4) Intermediate module type Z (page 76). Intermediate modules can also be combined with connection modules. Pos. 1 or can be combined with end module item 3. The length dimensions are calculated by adding the dimension "X" of the directional valve modules (see pages 19 to 21) and the poppet valve modules (see pages 31 to 72). For example: IH15BA006-1X / 07024AA / W220N9K4M01 IH15B assembly of nominal size A up to 14 l/min. With NG6 valve, 7 modules, consecutive numbering 24, variant AA, 220 V AC voltage, N9 manual operation, K4 connection type, sealing material Perbunan, connection type with pipe thread conforms to ISO 228 Part 1. Filter element assembly tool: - With pipe wrench Material No.: R904001048. Installation instructions for F30: - Turn the filter cartridge upward to the stop on the stop. Then rotate the filter cartridge approximately 1/3 turns. Installation instructions for DF30 and DF40: - Rotate the filter cartridge as far as possible. Then turn back approximately 1/8 to 1/944 turns.

R900700547 Air filters and oil trays for clamping and drive modules

Air filter (option): We recommend using an air filter when using clamping and drive modules in heavily contaminated environments. During installation, whether flanged, connected via rubber hose, or directly connected between the air filter and the engine intake pipe, the connection must be tight and reliable to prevent air leakage; rubber gaskets must be installed on both end faces of the filter element; the wing nuts fixing the air filter outer cover must not be tightened too tightly to avoid crushing the paper filter element. During use, strictly prevent the paper core air filter from getting wet by rain, because once the paper core absorbs a large amount of moisture, it will greatly increase the intake resistance and shorten the service life. In addition, the paper core air filter must not come into contact with oil or fire. Oil tray (option) (dimensions in mm): Size 3 and size 4 Material No. R901109231, size 5 and size 7 Material No. R901109235, Color: RAL 7077 "Light gray."

Weidou Intelligent Technology specializes in selling Bosch Rexroth IH15MA-1X/WSED-1HED8/50/O/V Part No. R900700547 clamping and drive modules, R900700547 control modules, R900700547 drive modules, R900700547 clamping modules, R900700547 Bosch Rexroth modules, UPE2141 clamping and drive modules, R900700547 compact modules, R900700547 motor modules, R900700547 hydraulic modules, R900700547 directional valve modules, R900700547 seat valve modules, IH2154MA modules, IH2154EA modules, R900700547 indexing modules, R900700547 release modules, R900700547 original German imports. Welcome customers to inquire and order.