stooss fasteners Germany stooss model stooss price

stooss fastener gaskets are mechanical seals between two objects, typically used as spacers to prevent pressure and corrosion between the two objects. They are also used to distribute load on threaded fasteners and prevent leakage in pipelines due to natural thermal expansion and contraction. Belleville washers, wave washers, wear-resistant pads, preload indicators, locking devices. Since machined surfaces cannot be perfect, gaskets are used to fill irregularities. Materials include stainless steel and carbon steel (carbon steel is essentially iron). Gaskets are formed by winding metal strips (generally v shaped metal strips) and non-metallic strips into a ring. The metal and non-metallic strips are wound alternately. Due to their good elasticity, they are widely used in flange sealing structures in the petrochemical, chemical, and power industries. Depending on the specific location, steel rings can be added to the inner or outer layer of the gasket for positioning or reinforcement.

stooss fastener material

Gaskets are components located between connectors and nuts, generally flat metal rings. Metallic gaskets; non-metallic gaskets made of rubber, synthetic resin, PTFE, etc. Non-metallic covered gaskets: gaskets covered with a layer of synthetic resin, etc. Semi-metallic gaskets: gaskets made of metallic and non-metallic materials, such as spiral wound gaskets and metal-clad gaskets. Spiral wound gaskets consist of metal strips with V-shaped or W-shaped cross-sections sandwiching non-metallic strips, wound spirally. Inner ring: a metal ring set in the inner circle of the spiral wound gasket. Outer ring: a metal ring set in the outer circle of the spiral wound gasket. Metal-clad gaskets: gaskets made of metals such as steel, aluminum, copper, nickel, or Monel alloy. Metal and non-metallic strips are wound alternately. Due to their good elasticity, they are used in flange sealing structures in various industries. Depending on the specific location, steel rings can be added to the inner or outer layer of the gasket for positioning or reinforcement.

stooss fastener applicable environment

Carbon steel: Recommended maximum operating temperature not exceeding 538℃, especially when the medium is oxidizing. High-quality thin carbon steel plates are also unsuitable for equipment handling inorganic acids, neutral or acidic salt solutions. If carbon steel is subjected to stress, the accident rate for equipment under hot water conditions is very high. Carbon steel gaskets are typically used for high-concentration acids and many alkaline solutions. Brinell hardness approximately 120. Adding about 2% molybdenum to 304 stainless steel improves its strength and corrosion resistance at elevated temperatures. It exhibits higher creep resistance than other common stainless steels at elevated temperatures. Recommended maximum operating temperature not exceeding 760℃. Brinell hardness approximately 160. Aluminum (content not less than 99%). Aluminum has excellent corrosion resistance and machinability, suitable for manufacturing double-jacketed gaskets. Brinell hardness approximately 35. Recommended maximum continuous operating temperature not exceeding 439℃.

stooss fastener installation requirements

The gasket and flange sealing surface must be cleaned thoroughly; there must be no defects such as scratches or spots that could affect sealing performance. The gasket outer diameter should be slightly smaller than the flange sealing surface outer diameter. The gasket inner diameter should be slightly larger than the pipe inner diameter. The difference between the two inner diameters is generally taken as 2 times the gasket thickness to ensure that after tightening, the inner edge of the gasket does not extend into the vessel or pipe, thereby avoiding obstruction of fluid flow. Gasket preload should not exceed design specifications to prevent excessive compression and loss of resilience. When installing gaskets, tighten nuts sequentially. Do not reach the design value in a single pass. Generally, cycle at least 2 to 16 times to ensure uniform stress distribution on the gasket. When replacing gaskets on pressure vessels and pipelines containing flammable or explosive media, use safety tools to avoid sparks caused by tool contact with flanges or bolts, which could lead to fire or explosion.

Weidou Intelligent Technology specializes in selling German stooss bolts, stooss studs, stooss screws, stooss nuts, stooss self-tapping screws, stooss washers, stooss gaskets, stooss lock washers, stooss safety washers, stooss locking washers, stooss lock plates, stooss safety plates, stooss locking plates, stooss retaining rings, stooss pins. stooss original imports from Germany. Welcome inquiries and orders from customers.