anton wimmer fasteners Germany anton wimmer models anton wimmer prices

anton wimmer fasteners self-tapping screws are thread-forming screws made of hardened steel with a type A point, used to connect sheet metal ducts in heating and ventilation systems. Therefore, they are also known as: sheet metal screws. Thread-forming self-tapping screws, thread-cutting self-tapping screws, thread-rolling self-tapping screws, and self-drilling self-tapping screws, also known as quick-thread screws, are steel fasteners with galvanized and passivated surfaces for quick installation. Self-tapping screws are mostly used for connections between thin metal sheets (steel plates, sawn boards, etc.). When connecting, first drill a pilot hole in the components to be connected, then screw the self-tapping screw into the pilot hole. Similar to machine screws, but the thread on the shank is a special self-tapping screw thread. Used to tightly connect two thin metal components into one unit. Small holes need to be pre-drilled in the components. Due to the high hardness of these screws, they can be directly screwed into the holes in the components, forming corresponding internal threads in the components.

anton wimmer fastener structure

Every self-tapping screw consists of four main elements: head shape, drive type, thread type, and point style. Head shapes vary; there are round heads, pan heads, round heads with flange (with washer), countersunk heads, truss heads, hex heads. Drive type refers to the method of turning the screw head during installation and tightening. The basic types are external drive and internal drive. Generally speaking, external drive allows higher torque than any form of internal drive (internal recess). External drive: hex, hex flange. Internal drive: slotted, Phillips, square, combination, Torx, triangle, internal 24-lobe, clutch head. There is a wide variety of threads, as well as some other special threads. Point styles are mainly cone point and flat point. However, depending on usage requirements, the entering part of the point can be processed with cutting grooves, slots, cuts, or parts similar to a drill bit shape.

anton wimmer fastener performance

There are many types of self-tapping screws, but they all share the following common points: generally made of case-hardened steel, accounting for 111% of total production. They can also be made of stainless steel or non-ferrous metals. Products must undergo heat treatment. Carbon steel self-tapping screws must undergo carburizing treatment, and stainless steel self-tapping screws must undergo solution hardening treatment. This ensures that the self-tapping screws meet the mechanical and usage performance required by standards. The product surface has high hardness, and the core has good toughness, i.e., soft inside and hard outside. This is a major characteristic of self-tapping screw performance requirements. If the surface hardness is low, it cannot be screwed into the base material; if the core toughness is poor, it will break as soon as it is turned, making it unusable. Therefore, being soft inside and hard outside is a very important requirement for self-tapping screws to meet usage performance. High speed is emphasized here to ensure product quality. Only self-tapping screws produced by high-speed machines have good head formation and high thread quality.

anton wimmer fastener application industries

In summary, there are many types of self-tapping screws. With production development and technological progress, new types of self-tapping screw products with new materials, new structures, and new thread forms (self-tapping threads, also known as wide-pitch threads, mostly electroplated surfaces) will continue to emerge. The holes drilled by self-tapping screws do not require tapping. The screws used are different from general ones; the head is pointed, and the pitch is relatively large, allowing them to be screwed in directly without tapping. This method is commonly used for metal and plastic. It can press out corresponding threads on the material being fastened by relying on its own threads, ensuring a tight fit. Widely used in industries including energy, electronics, electrical appliances, machinery, chemical industry, metallurgy, molds, hydraulics, etc. It is the most widely used basic mechanical component on various machinery, equipment, vehicles, ships, railways, bridges, buildings, structures, tools, instruments, chemical industry, meters, and supplies.

Weidou Intelligent Technology professionally sells German anton wimmer bolts, anton wimmer studs, anton wimmer screws, anton wimmer nuts, anton wimmer self-tapping screws, anton wimmer washers, anton wimmer shims, anton wimmer lock washers, anton wimmer safety washers, anton wimmer locking washers, anton wimmer lock shims, anton wimmer safety shims, anton wimmer locking shims, anton wimmer retaining rings, anton wimmer pins, anton wimmer original imports from Germany. Welcome customers to inquire and order.