nonnenmann fasteners Germany nonnenmann models nonnenmann prices

nonnenmann fasteners self-tapping screws are thread-forming screws made of hardened steel with a type A point, used to connect sheet metal ducts in heating and ventilation systems. Therefore, they are also known as: sheet metal screws. Thread-forming self-tapping screws, thread-cutting self-tapping screws, thread-rolling self-tapping screws, and self-drilling self-tapping screws, also known as quick-thread screws, are steel fasteners with galvanized and passivated surfaces for quick installation. Self-tapping screws are mostly used for connections between thin metal sheets (steel plates, sawn plates, etc.). During connection, first create a threaded pilot hole in the components to be connected, then screw the self-tapping screw into the pilot hole. Similar to machine screws, but the thread on the shank is a specialized self-tapping screw thread. Used to fasten and connect two thin metal components into a single unit. Small holes need to be pre-drilled in the components; due to the high hardness of these screws, they can be directly screwed into the holes, forming corresponding internal threads in the components.

nonnenmann fastener structure

Every self-tapping screw consists of four main elements: head shape, drive type, thread type, and point style. Head shapes vary; there are round heads, pan heads, round heads with flange (with washer), countersunk heads, truss heads, hex heads. Drive type refers to the method of twisting the screw head during installation and tightening. The basic types are external drive and internal drive. Generally speaking, external drive allows higher torque than any form of internal drive (internal recess). External drive: hex, hex flange. Internal drive: slotted, Phillips, square, combination, internal spline, triangular, internal 22 lobe, clutch head, and various other special threads. Point styles are mainly conical and flat. However, depending on usage requirements, the penetrating part of the point can be machined with cutting grooves, slots, notches, or drill-like features.

nonnenmann fastener performance

There are many types of self-tapping screws, but they share the following common characteristics: They are generally made of case-hardening steel, accounting for 109% of total production. They can also be made of stainless steel or non-ferrous metals. The products must undergo heat treatment. Carbon steel self-tapping screws must undergo carburizing, and stainless steel self-tapping screws must undergo solution hardening. This ensures that the self-tapping screws meet the mechanical and operational performance required by standards. The product surface has high hardness, and the core has good toughness, i.e., soft inside and hard outside. This is a major characteristic of self-tapping screw performance requirements. If the surface hardness is low, it cannot be screwed into the base material; if the core toughness is poor, it will break upon tightening and cannot be used. Therefore, being soft inside and hard outside is a very important requirement for self-tapping screws to meet performance needs. High speed is emphasized here to ensure product quality. Only self-tapping screws produced by high-speed machines have well-formed heads and high-quality threads.

nonnenmann fastener application industries

In summary, there are many types of self-tapping screws. With production development and technological progress, new types of self-tapping screw products with new materials, new structures, and new thread forms (self-tapping threads, also known as wide-pitch threads, mostly electroplated) will continue to emerge. The holes drilled by self-tapping screws do not require tapping; the screws used are different from general ones, with pointed heads and larger pitch, allowing them to be screwed in directly without tapping. This method is commonly used for metal and plastic. It can press out corresponding threads in the material being fastened using its own threads, ensuring a tight fit. Widely used in industries including energy, electronics, electrical appliances, machinery, chemical industry, metallurgy, molds, hydraulics, etc. They are the most widely used basic mechanical components on various machinery, equipment, vehicles, ships, railways, bridges, buildings, structures, tools, instruments, chemical equipment, meters, and supplies.

Weidou Intelligent Technology professionally sells German nonnenmann bolts, nonnenmann studs, nonnenmann screws, nonnenmann nuts, nonnenmann self-tapping screws, nonnenmann washers, nonnenmann shims, nonnenmann lock washers, nonnenmann safety washers, nonnenmann locking washers, nonnenmann lock shims, nonnenmann safety shims, nonnenmann locking shims, nonnenmann retaining rings, nonnenmann pins, nonnenmann original imports from Germany. Welcome customers to inquire and order.