argip fasteners Germany argip models argip prices

argip fasteners feature one or more cutting slots at the end of the thread, allowing them to cut matching internal threads in a manner similar to a tap when screwed into a pre-drilled hole, utilizing the tail and threads of the screw. They can be used on thick plates, relatively hard or brittle materials that are difficult to form. Self-tapping screws are screws with a drill point; using specialized power tools, drilling, tapping, fixing, and locking are completed in one operation. Self-tapping screws are mainly used for connections such as joining color steel sheets to each other and to purlins, among others. These self-tapping screws are often exposed outdoors and have strong corrosion resistance; their rubber sealing washers ensure no water ingress at the screw location and provide good corrosion resistance. Self-tapping screws are typically described by three parameters: screw diameter grade, number of threads per inch, and shank length. The corresponding screw diameters have three grades for the number of threads per inch; the higher the number of threads per inch, the stronger the self-drilling capability.

argip fasteners basics

Generally refers to threads that are self-tapping, enabling self-tapping action without the need for a matching nut. Screw heads come in many classifications, including external hex, pan head, countersunk head, internal hex, umbrella head, and washer head, among others. The tail is generally pointed to enable self-tapping action. Self-tapping screws are also called self-tapping screw fasteners. The primary advantage of self-tapping screws is that they do not require a matching nut, resulting in significant cost savings by eliminating the cost of nuts. There are many commonly used self-tapping screws, such as cross-recessed pan head self-tapping screws, countersunk self-tapping screws, washer-head self-tapping screws, umbrella head self-tapping screws, cut-point self-tapping screws, and the triangular thread self-locking screws mentioned in a previous post. Triangular thread self-locking screws are widely used in the market and frequently utilized by customers.

argip fasteners surface treatment

Self-tapping screw surface treatment: Most self-tapping screws are coated with zinc plating or zinc phosphate coating. Cadmium plating is rarely used due to its high cost and toxicity; if appearance is important, nickel or chrome plating can be selected. When testing applicable pilot hole diameters, the screws used must have the same surface treatment. To penetrate iron plates, self-tapping screws must undergo carburizing treatment. Carburizing results in high hardness and high carbon content, which can lead to hydrogen embrittlement during electroplating or pickling treatments. The thickness of flat washers or spacers under the head bearing surface should match the maximum effective thread length of the screw. For long screws with partial threads, the shank can be supported by longer cold-rolled steel spacers or flat washers to ensure the fully threaded section engages and remains within the test iron plate thickness.

argip fastener types

Based on the development and evolution of self-tapping screws, we believe that the main types of self-tapping screws are as follows: The threads of ordinary self-tapping screws are "self-tapping threads," also known as "wide-pitch threads." The surface is mostly electroplated. Self-cutting self-tapping screws are called "self-tapping screws with scraping ends," and the threads are self-tapping threads or machine threads. The cross recess is also of the "H" type. Self-cutting self-tapping screws come in the following forms: pan-head self-cutting self-tapping screws with cross recesses, and countersunk-head self-cutting self-tapping screws with cross recesses. The shank cross-section of self-tapping screws is triangular. Therefore, they are also called triangular thread screws. Ordinary self-tapping screws, self-cutting self-tapping screws, self-drilling self-tapping screws, etc., combined with flat washers and spring washers (including spring washers and elastic locking washers t), form combination self-tapping screws. In short, there are many types of self-tapping screws. With the development of production, technological progress, new materials, new structures, and new thread forms, new types of self-tapping screw products will continue to emerge.

Weidou Intelligent Technology professionally sells German argip bolts, argip studs, argip screws, argip nuts, argip self-tapping screws, argip washers, argip shims, argip lock washers, argip safety washers, argip locking washers, argip lock shims, argip safety shims, argip locking shims, argip retaining rings, argip pins, argip original imports from Germany. We welcome customer inquiries and orders.