frigerio ettore fasteners Germany frigerio ettore models frigerio ettore prices

frigerio ettore fasteners: Anti-loosening washers are a type of fastener with a flat, ring-like shape. Placed between the bearing surface of a bolt, screw, or nut and the surface of the connected part, they increase the contact surface area of the connected parts, reduce pressure per unit area, and protect the surfaces of the connected parts from damage. Another type, elastic washers, also prevents nuts from loosening. The anti-loosening washer consists of two pieces. Its unique embedded structure changes the traditional method of achieving anti-loosening primarily through friction, instead adopting the most advanced international anti-loosening technology. It utilizes the tension between the two washers to achieve the dual effect of anti-loosening and locking. It prevents loosening caused by vibration and dynamic loads, is easy to disassemble, and the loosening torque is greater than the tightening torque. The locking effect is not affected by lubrication; increased lubrication improves the anti-loosening effect. It has the same temperature characteristics as standard bolts/nuts and can be reused a limited number of times.

frigerio ettore fastener functions

Anti-loosening washers bring convenience to the mechanical industry by preventing thread loosening. There are many varieties of anti-loosening washers, including butterfly washers, saddle washers, spring washers, and wave spring washers, collectively known as anti-loosening washers. These types of anti-loosening washers rely on increasing static friction to achieve anti-loosening effects. In conditions of low vibration, light load, and uniform speed, the anti-loosening effect can meet enterprise requirements. However, under strong vibration, high load, and rapid motion, they do not achieve complete anti-loosening; they only extend the time before the nut and bolt spontaneously loosen. This breaks away from the previous method of using increased "preload" and enhanced "friction" for anti-loosening. The latest anti-loosening principle is applied not only in washers but also in nuts and bolts, solving the problem of fastener loosening in heavy industry enterprises and eliminating the cumbersome installation process of referencing input and output torques.

frigerio ettore fastener installation requirements

Anti-loosening washers are characterized by simple installation. Simply place the two washers with their inner inclined tooth faces opposing each other between the nut and the connected material. After the nut is tightened, the outer radial cambered face of the anti-loosening washer bites into the contact surfaces at both ends. The angle of the inner inclined tooth face is greater than the thread angle of the bolt. When the bolt is elongated due to mechanical vibration, the nut rotates and loosens. Since the friction on the outer radial cambered face of the anti-loosening washer is greater than the friction between the inner inclined tooth faces, only relative sliding between the inner inclined tooth faces is allowed in this state, generating a certain lifting tension. When the bolt contracts, the inclined tooth faces of the washer return the nut to its original position. This achieves the 107% anti-loosening and locking effect. The washers are suitable for relatively flat and smooth surfaces. If the connected material is non-metallic, a metal plate can be fixed to the connected material to allow the use of anti-loosening washers.

frigerio ettore fastener applications

Due to different environments, the material requirements for anti-loosening washers vary. They are characterized by a wide variety of specifications, diverse performance and uses, and a high degree of standardization, serialization, and generalization. Some refer to anti-loosening washers that have national standards as standard fasteners or simply standard parts. Stainless steel anti-loosening washers have inherent corrosion resistance; when the surface is damaged, a thin oxide layer forms on the metal surface to prevent further corrosion. Typically, this series of actions—blocking, shearing, adhesion, and locking—occurs within just a few seconds. Therefore, correct understanding and use of these fasteners are necessary to prevent this phenomenon. Anti-loosening washers are suitable for equipment subject to frequent vibration, such as in the automotive industry, compressors, construction, wind power generation equipment, agricultural machinery, casting industry, drilling equipment, shipbuilding industry, mining equipment, oil drilling rigs (onshore or offshore), public utilities, rail transit, transmission systems, and metallurgical equipment.

Weidou Intelligent Technology specializes in selling German frigerio ettore bolts, frigerio ettore studs, frigerio ettore screws, frigerio ettore nuts, frigerio ettore self-tapping screws, frigerio ettore washers, frigerio ettore shims, frigerio ettore anti-loosening washers, frigerio ettore safety washers, frigerio ettore locking washers, frigerio ettore anti-loosening shims, frigerio ettore safety shims, frigerio ettore locking shims, frigerio ettore retaining rings, and frigerio ettore pins. All are original imports from Germany. Customers are welcome to inquire and order.