johnson-fluiten fasteners Germany johnson-fluiten model johnson-fluiten price

johnson-fluiten fasteners feature one or more cutting slots at the end of the thread, allowing them to cut matching internal threads in a manner similar to a tap when screwed into a pre-drilled hole, utilizing the screw tail and threads. They can be used on thick plates, relatively hard or brittle materials that are difficult to form. Self-tapping screws are screws with a drill bit tip; construction with specialized power tools completes drilling, tapping, fixing, and locking in one operation. Self-tapping screws are mainly used for connections such as joining color steel sheets to each other and fixing them to purlins. These self-tapping screws are often exposed outdoors and possess strong corrosion resistance; their rubber sealing rings ensure no water ingress at the screw location and provide good corrosion resistance. Self-tapping screws are typically described by three parameters: screw diameter grade, number of threads per inch, and shank length. The corresponding screw diameters have three grades for the number of threads per inch; the higher the number of threads per inch, the stronger the self-drilling capability.

johnson-fluiten fasteners basics

Generally refers to threads that are self-tapping, enabling self-tapping action without the need for a matching nut. Screw heads have many classifications, including external hex head, pan head, countersunk head, internal hex head, umbrella head, and head with washer, among others. The tail is generally pointed to enable self-tapping action. Self-tapping screws are also called self-tapping screw fasteners. The main advantage of self-tapping screws is that they do not require a matching nut, resulting in significant cost savings by eliminating the cost of nuts. There are many commonly used self-tapping screws, such as cross-recessed pan head self-tapping screws, countersunk self-tapping screws, self-tapping screws with washers, umbrella head self-tapping screws, cut-tail self-tapping screws, and the triangular thread self-locking screws mentioned in a previous post. Triangular thread self-locking screws are widely used in the market and by customers.

johnson-fluiten fasteners surface treatment

Self-tapping screw surface treatment: Most self-tapping screws are coated with zinc plating or zinc phosphate coating. Cadmium plating is rarely used due to its high cost and toxicity; if appearance is important, nickel or chrome plating can be selected. When testing the applicable pilot hole diameter, the screws used must have the same surface treatment. To penetrate iron plates, self-tapping screws must undergo carburizing treatment. Carburizing results in high hardness and high carbon content, which can cause hydrogen embrittlement during electroplating or pickling treatments. The thickness of the flat washer or spacer under the head bearing surface should match the maximum effective thread length of the screw. For long screws with partial threads, the shank can be supported by longer cold-rolled steel spacers or flat washers to ensure the fully threaded section engages and remains within the test iron plate thickness.

johnson-fluiten fasteners types

Based on the development and evolution of self-tapping screws, we believe the main types of self-tapping screws are as follows: Standard self-tapping screws have "self-tapping threads," also known as "wide pitch threads." The surface is mostly electroplated. Self-cutting self-tapping screws are called "self-tapping screws with scraping end," with threads that are self-tapping or machine threads, and the cross recess is also "H" type. Self-cutting self-tapping screws come in the following forms: cross-recessed pan head self-cutting self-tapping screws, and cross-recessed countersunk self-cutting self-tapping screws. The shank cross-section of self-tapping screws is triangular, so they are also called triangular thread screws. Standard self-tapping screws, self-cutting self-tapping screws, self-drilling self-tapping screws, etc., combined with flat washers and spring washers (including spring washers and elastic locking washers forming t combination self-tapping screws). In short, there are many types of self-tapping screws. With production development, technological progress, new materials, new structures, and new thread forms, new types of self-tapping screw products will continue to emerge.

Weidou Intelligent Technology professionally sells German johnson-fluiten bolts, johnson-fluiten studs, johnson-fluiten screws, johnson-fluiten nuts, johnson-fluiten self-tapping screws, johnson-fluiten washers, johnson-fluiten shims, johnson-fluiten lock washers, johnson-fluiten safety washers, johnson-fluiten locking washers, johnson-fluiten lock shims, johnson-fluiten safety shims, johnson-fluiten locking shims, johnson-fluiten retaining rings, johnson-fluiten pins, johnson-fluiten original imports from Germany. We welcome customers to inquire and order.