poeppelman fasteners Germany poeppelman model poeppelman price

poeppelman fasteners cut one or more cutting edges at the end of the thread, allowing them to cut matching internal threads in a manner similar to a tap when screwed into a pre-drilled hole, utilizing the tail and threads of the screw. They can be used on thick plates, relatively hard or brittle materials that are difficult to form. Self-tapping screws are screws with a drill bit tip; construction is performed using specialized power tools to complete drilling, tapping, fixing, and locking in one operation. Self-tapping screws are mainly used for connections such as joining color steel sheets to each other and fixing them to purlins, etc. These self-tapping screws are often exposed to the outdoors and have strong corrosion resistance; their rubber sealing rings ensure no water seepage at the screw location and provide good corrosion resistance. Self-tapping screws are typically described by three parameters: screw diameter grade, number of threads per inch, and shank length. The corresponding screw diameters have three grades for the number of threads per inch; the higher the number of threads per inch, the stronger the self-drilling capability.

poeppelman fasteners basics

Generally refers to threads that are self-tapping, enabling self-tapping action without the need for a mating nut. Screw heads have many classifications, including external hex head, pan head, countersunk head, internal hex head, umbrella head, and head with washer, among others. The tail is generally pointed to enable self-tapping action. Self-tapping screws are also called self-tapping screw fasteners. The primary advantage of self-tapping screws is that they do not require a mating nut, resulting in significant cost savings by eliminating the cost of nuts. There are many commonly used self-tapping screws, such as cross-recessed pan head self-tapping screws, countersunk self-tapping screws, self-tapping screws with washers, umbrella head self-tapping screws, cut-tail self-tapping screws, and the triangular thread self-locking screws mentioned in a previous post. Triangular thread self-locking screws are widely used in the market and by customers.

poeppelman fasteners surface treatment

Self-tapping screw surface treatment: Most self-tapping screws are coated with zinc plating or zinc phosphate coating. Cadmium plating is rarely used due to its high cost and toxicity; if appearance is important, nickel or chrome plating can be selected. When testing the applicable pilot hole diameter, the screws used must have the same surface treatment. To penetrate iron plates, self-tapping screws must undergo carburizing treatment. Carburizing results in high hardness and high carbon content, which can cause hydrogen embrittlement during electroplating or pickling treatments. The thickness of flat washers or spacers under the head bearing surface should match the maximum effective thread length of the screw. For long screws with partial threads, the shank can be supported by longer cold-rolled steel spacers or flat washers to ensure the fully threaded section engages and remains within the test iron plate thickness.

poeppelman fasteners types

Based on the development and evolution of self-tapping screws, we believe that the main types of self-tapping screws are as follows: The thread of ordinary self-tapping screws is "self-tapping thread", also known as "wide pitch thread". The surface is mostly electroplated. Self-cutting self-tapping screws are called "self-tapping screws with scraping end", and the thread is self-tapping thread or machine thread. The cross slot is also "H" type. There are several types of self-cutting self-tapping screws: cross-slot pan head self-cutting self-tapping screws, cross-slot countersunk head self-cutting self-tapping screws. The shank cross-section of self-tapping screws is triangular. Therefore, they are also called triangular thread screws. Ordinary self-tapping screws, self-cutting self-tapping screws, self-drilling self-tapping screws, etc., combined with flat washers and spring washers (including spring washers and elastic locking washers t), form composite self-tapping screws. In short, there are many types of self-tapping screws. With the development of production and technological progress, new materials, new structures, and new thread forms will lead to the continuous emergence of new types of self-tapping screw products.

Weidou Intelligent Technology professionally sells German poeppelman bolts, poeppelman studs, poeppelman screws, poeppelman nuts, poeppelman self-tapping screws, poeppelman washers, poeppelman shims, poeppelman lock washers, poeppelman safety washers, poeppelman locking washers, poeppelman lock shims, poeppelman safety shims, poeppelman locking shims, poeppelman retaining rings, poeppelman pins, poeppelman original imports from Germany. We welcome customers to inquire and order.