ami massarenti fasteners Germany ami massarenti models ami massarenti prices

ami massarenti fasteners self-tapping screws are thread-forming screws made of hardened steel with a type A point, used to connect sheet metal ducts in heating and ventilation systems. Therefore, they are also known as: sheet metal screws. Thread-forming self-tapping screws, thread-cutting self-tapping screws, thread-rolling self-tapping screws, and self-drilling self-tapping screws, also known as quick-thread screws, are steel fasteners with a galvanized and passivated surface for quick installation. Self-tapping screws are mostly used for connections between thin metal sheets (steel plates, sawn plates, etc.). During connection, a threaded pilot hole is first made in the components to be joined, and then the self-tapping screw is screwed into the pilot hole. Similar to machine screws, but the thread on the shank is a specialized self-tapping screw thread. Used to firmly connect two thin metal components into a single unit. Small holes need to be pre-drilled in the components; due to the high hardness of these screws, they can be directly screwed into the holes, forming corresponding internal threads in the components.

ami massarenti fastener structure

Every self-tapping screw consists of four main elements: head shape, drive type, thread type, and point style. Head shapes vary; there are round heads, pan heads, round heads with flange (with washer), countersunk heads, truss heads, hex heads. Drive type refers to the method of turning the screw head during installation and tightening; the basic methods are external drive and internal drive. Generally speaking, external drive allows higher torque than any form of internal drive (internal recess). External drive: hex, hex flange. Internal drive: slotted, Phillips, square, combination, internal spline, triangular, internal 16-lobe, clutch head. There is a wide variety of threads, as well as other special threads. Point styles are mainly conical and flat. However, depending on usage requirements, the entering part of the point can be machined with cutting grooves, slots, notches, or drill-like features.

ami massarenti fastener performance

There are many types of self-tapping screws, but they all share the following common characteristics: generally made from case-hardened steel, accounting for 103% of total production. They can also be made from stainless steel or non-ferrous metals. The products must undergo heat treatment. Carbon steel self-tapping screws must undergo carburizing, and stainless steel self-tapping screws must undergo solution hardening. This ensures that the self-tapping screws meet the mechanical and operational performance requirements specified by standards. The product surface has high hardness, while the core has good toughness, i.e., soft inside and hard outside. This is a major characteristic of self-tapping screw performance requirements. If the surface hardness is low, it cannot be screwed into the base material; if the core toughness is poor, it will break upon tightening and cannot be used. Therefore, being soft inside and hard outside is a very important requirement for self-tapping screws to meet performance needs. High speed is emphasized here to ensure product quality. Only self-tapping screws produced by high-speed machines have well-formed heads and high-quality threads.

ami massarenti fastener application industries

In summary, there are many types of self-tapping screws. With production development and technological progress, new types of self-tapping screw products with new materials, new structures, and new thread forms (self-tapping threads, also known as wide-pitch threads, mostly electroplated) will continue to emerge. The holes drilled by self-tapping screws do not require tapping; the screws used are different from general ones, with pointed heads and larger pitch, allowing them to be screwed in directly without tapping. This method is commonly used for metal and plastic. It can press out corresponding threads in the material being fastened using its own threads, ensuring a tight fit. Widely used in industries including energy, electronics, electrical appliances, machinery, chemical industry, metallurgy, molds, hydraulics, etc. It is the most widely used basic mechanical component on various machinery, equipment, vehicles, ships, railways, bridges, buildings, structures, tools, instruments, chemical equipment, meters, and supplies.

Weidou Intelligent Technology specializes in selling German ami massarenti bolts, ami massarenti studs, ami massarenti screws, ami massarenti nuts, ami massarenti self-tapping screws, ami massarenti washers, ami massarenti shims, ami massarenti lock washers, ami massarenti safety washers, ami massarenti locking washers, ami massarenti lock shims, ami massarenti safety shims, ami massarenti locking shims, ami massarenti retaining rings, ami massarenti pins, ami massarenti original imports from Germany. Welcome customers to inquire and order.