TEKA Absaug filter German TEKA Absaug model TEKA Absaug price

TEKA Absaug filter is an indispensable device on the medium transport pipeline, usually installed at the inlet of pressure reducing valves, relief valves, constant water level valves, and other equipment. The filter consists of a housing, stainless steel filter screen, blowdown section, drive mechanism, and electrical control components. Water to be treated passes through the filter screen cartridge, where impurities are retained. When cleaning is required, simply remove the detachable cartridge, clean it, and reinstall it, making operation and maintenance extremely convenient. It is the "decision-making unit" that issues commands, i.e., completes the coordination and command of the entire computer system. Controllers are divided into combinational logic controllers and microprogrammed controllers, each with its own advantages and disadvantages. Combinational logic controllers are troublesome to design and complex in structure; once designed, they cannot be modified or expanded, but they offer high speed. Microprogrammed controllers are easy to design, simple in structure, and convenient to modify or expand. To modify the function of a machine instruction, only the corresponding microprogram needs to be rewritten; to add a machine instruction, only a segment of microprogram needs to be added to the control memory. However, it operates by executing a segment of microprogram. Specific comparisons are as follows: Combinational logic controllers, also known as hardwired controllers, are composed of logic circuits and rely entirely on hardware to implement instruction functions.

TEKA Absaug filter principle

Water to be filtered enters through the inlet, flows through the filter screen, and exits into the user's required pipeline for process circulation. Particulate impurities in the water are trapped inside the filter screen. As this cycle continues, more particles are trapped, slowing down the filtration speed, while contaminated water continues to enter. The filter pores become smaller, creating a pressure difference between the inlet and outlet. When the pressure difference reaches the set value, the differential pressure transmitter sends an electrical signal to the controller. The control system starts the drive motor, which rotates the shaft via the transmission assembly, while simultaneously opening the blowdown port to discharge waste. After the filter screen is cleaned, the pressure difference drops to the minimum value, and the system returns to the initial filtration state for normal operation. It operates in two modes: patrol mode and identification mode. In patrol mode, the controller continuously sends query codes to the card reader and receives replies. This mode persists until the card reader detects a card. Upon detecting a card, the card reader sends a different reply to the controller's patrol command, transmitting the read card internal code data to the access controller, switching it to identification mode. In identification mode, the access controller analyzes the card internal code, compares it with stored card data, and executes subsequent actions. After completing data reception, the access controller sends a reply command to the card reader to restore its status, and the access controller returns to patrol mode.

TEKA Absaug filter filtration speed

When solid particles in a suspension are large and uniform in grain size, the pores in the filter cake layer are relatively open, allowing the filtrate to pass through at a higher speed. Using coagulants to aggregate fine particles into larger clumps helps improve filtration speed. For suspensions where solid particles settle quickly, filters with feed applied to the upper part of the filter medium are used, aligning the filtration direction with gravity. Coarse particles settle first, reducing clogging of the filter medium and filter cake layer. In difficult-to-filter suspensions (such as colloids), mixing in coarser solid particles like diatomaceous earth or expanded perlite can loosen the filter cake layer. When filtrate viscosity is high, heating the suspension can reduce viscosity. These measures all accelerate filtration speed.

TEKA Absaug filter performance characteristics

1. High efficiency, precise filtration: Special structure disc filter technology offers precise and sensitive performance, ensuring that only particles smaller than the required size enter the system, making it the most effective filtration system. Specifications include 5μ, 10μ, 20μ, 55μ, 100μ, 130μ, 200μ, and others. Users can select filter discs of different precisions according to water usage requirements. System flow rate can be flexibly adjusted as needed. 2. Standard modular design, space-saving: The system is based on standard disc filter units, designed modularly. Users can select as needed, offering flexibility and strong interchangeability. The system is compact and occupies minimal space, allowing flexible installation in corner spaces. For example, equipment handling approximately 300m3/h of water occupies only about 6m2 (for general water quality, filtration grade 106μ).

Weidou Intelligent Technology specializes in selling German TEKA Absaug filters, TEKA Absaug filter screens, TEKA Absaug filter cartridges, TEKA Absaug filtration systems, TEKA Absaug oil filters, TEKA Absaug water purifiers, TEKA Absaug filtering machines, TEKA Absaug filtration equipment, TEKA Absaug filter tubes, TEKA Absaug vacuum filters, TEKA Absaug filter controllers, TEKA Absaug filter valves, TEKA Absaug automatic filters, TEKA Absaug filter ball valves, TEKA Absaug water strainers. TEKA Absaug original German imports. Welcome inquiries and orders from users.