RITTAL filter, German RITTAL model, RITTAL price

The RITTAL filter is an indispensable device on media transport pipelines, typically installed at the inlet of pressure reducing valves, relief valves, constant level valves, and other equipment. The filter consists of a housing, stainless steel filter mesh, blowdown section, drive mechanism, and electrical control components. Water to be treated passes through the filter cartridge with the mesh, where impurities are retained. When cleaning is required, simply remove the detachable filter cartridge, clean it, and reinstall it, making operation and maintenance extremely convenient. It is the "decision-making unit" that issues commands, coordinating and directing the operation of the entire computer system. Controllers are divided into combinational logic controllers and microprogrammed controllers, each with its own advantages and disadvantages. Combinational logic controllers are troublesome to design and have a complex structure; once designed, they cannot be modified or expanded, but they offer high speed. Microprogrammed controllers are easy to design, have a simple structure, and are easy to modify or expand. Modifying the function of a machine instruction only requires recompiling the corresponding microprogram; adding a machine instruction only requires adding a segment of microprogram to the control memory. However, it operates by executing a segment of microprogram. A specific comparison is as follows: The combinational logic controller, also known as a hardwired controller, is composed of logic circuits and relies entirely on hardware to implement instruction functions.

RITTAL filter principle

Water to be filtered enters through the inlet, flows through the filter mesh, and exits through the outlet into the user's required pipeline for process circulation. Particulate impurities in the water are trapped inside the filter mesh. As this cycle continues, more and more particles are trapped, slowing the filtration speed, while untreated water continues to enter. The filter pores become smaller, creating a pressure difference between the inlet and outlet. When the differential pressure reaches the set value, the differential pressure transmitter sends an electrical signal to the controller. The control system starts the drive motor, which rotates the shaft via the transmission assembly. Simultaneously, the blowdown port opens to discharge contaminants. After the filter mesh is cleaned, the pressure drop decreases to the minimum value, the system returns to the initial filtration state, and operates normally. It operates in two modes: inspection mode and identification mode. In inspection mode, the controller continuously sends query codes to the card reader and receives responses. This mode persists until the card reader detects a card. When a card is detected, the card reader sends a different response to the controller's inspection command. In this response, the card reader transmits the internal code data read from the proximity card to the access controller, causing the access controller to enter identification mode. In the access controller's identification mode, the controller analyzes the proximity card's internal code, compares it with card data stored in the device, and executes subsequent actions. After completing the data reception, the access controller sends a command response to the card reader to restore its status, and the access controller returns to inspection mode.

RITTAL filter filtration speed

When solid particles in a suspension are large and uniform in grain size, the pores in the filter cake layer are relatively open, allowing the filtrate to pass through the cake layer at a higher speed. Using coagulants to aggregate fine particles into larger clumps helps improve filtration speed. For suspensions where solid particles settle quickly, filters that feed onto the upper part of the filter medium are used, aligning the filtration direction with gravity. Coarse particles settle first, reducing clogging of the filter medium and filter cake layer. In difficult-to-filter suspensions (such as colloids), mixing in coarser solid particles like diatomaceous earth or expanded perlite can loosen the filter cake layer. When the filtrate viscosity is high, heating the suspension can reduce viscosity. These measures all accelerate filtration speed.

RITTAL filter performance features

1. High-efficiency, precise filtration: Special-structure filter disc filtration technology offers precise and sensitive performance, ensuring that only particles smaller than the required size enter the system, making it the most effective filtration system. Specifications include 5μ, 10μ, 20μ, 55μ, 100μ, 130μ, 200μ, and others. Users can select filter discs with different precisions according to water usage requirements. System flow rate can be flexibly adjusted as needed. 2. Standard modular design, space-saving: The system is based on standard disc filter units and designed modularly. Users can select modules as needed, offering flexibility and strong interchangeability. The system is compact and occupies minimal space, allowing flexible installation in corner spaces. For example, equipment handling a water volume of approximately 300m3/h occupies only about 6m2 (for general water quality, filtration grade 106μ).

Weidou Intelligent Technology professionally sells German RITTAL filters, RITTAL filter meshes, RITTAL filter cartridges, RITTAL filtration systems, RITTAL oil filters, RITTAL water purification filters, RITTAL filtering machines, RITTAL filtration equipment, RITTAL filter tubes, RITTAL vacuum filters, RITTAL filter controllers, RITTAL filter valves, RITTAL automatic filters, RITTAL filter ball valves, RITTAL water strainers. RITTAL original German imports. Welcome inquiries and orders from users.