HANDTE filter, German HANDTE model, HANDTE price

The HANDTE filter is an essential device installed on pipelines for transporting media. It is typically installed at the inlet of pressure reducing valves, relief valves, constant water level valves, and other equipment. The filter consists of a housing, a stainless steel filter screen, a blowdown section, a drive mechanism, and an electrical control section. As the water to be treated passes through the filter cartridge containing the screen, impurities are retained. When cleaning is required, simply remove the detachable filter cartridge, clean it, and reinstall it, making operation and maintenance extremely convenient. It acts as the "decision-making unit" that issues commands, coordinating and directing the operation of the entire computer system. Controllers are divided into combinational logic controllers and microprogrammed controllers, each with its own advantages and disadvantages. Combinational logic controllers are difficult to design and have complex structures; once designed, they cannot be modified or expanded, but they offer high speed. Microprogrammed controllers are easier to design, have simpler structures, and are easy to modify or expand. Modifying the function of a machine instruction only requires recompiling the corresponding microprogram; adding a machine instruction only requires adding a segment of microprogram to the control memory. However, it operates by executing a segment of microcode. A specific comparison is as follows: Combinational logic controllers, also known as hardwired controllers, are composed of logic circuits and rely entirely on hardware to implement instruction functions.

HANDTE filter principle

Water to be filtered enters through the inlet, flows through the filter screen, and exits into the user's required pipeline for process circulation. Particulate impurities in the water are trapped inside the filter screen. As this cycle continues, the amount of trapped particles increases, slowing down the filtration speed. Meanwhile, untreated water continues to enter, causing the filter pores to become increasingly clogged. This creates a pressure difference between the inlet and outlet. When the pressure difference reaches the set value, the differential pressure transmitter sends an electrical signal to the controller. The control system then starts the drive motor, which rotates the shaft via the transmission assembly. Simultaneously, the blowdown port opens to discharge the waste. Once the filter screen is cleaned, the pressure difference drops to its minimum value, and the system returns to the initial filtration state for normal operation. The access controller operates in two modes: polling mode and identification mode. In polling mode, the controller continuously sends query codes to the card reader and receives responses. This mode persists until the card reader detects a card. Upon detecting a card, the card reader sends a different response to the controller's polling command. In this response, the card reader transmits the internal code data read from the proximity card to the access controller, causing the access controller to switch to identification mode. In identification mode, the access controller analyzes the proximity card's internal code, compares it with the card data stored in the device, and executes subsequent actions. After completing the data reception action, the access controller sends a command response to the card reader to restore its status, and the access controller returns to polling mode.

HANDTE filter filtration speed

When the solid particles in a suspension are large and uniform in grain size, the pores in the filter cake layer are relatively open, allowing the filtrate to pass through at a higher speed. Using coagulants to aggregate fine particles into larger clumps helps improve filtration speed. For suspensions where solid particles settle quickly, filters that feed material onto the upper part of the filter medium are used, aligning the filtration direction with gravity. Coarse particles settle first, reducing clogging of the filter medium and filter cake layer. In difficult-to-filter suspensions (such as colloids), mixing in coarser solid particles like diatomaceous earth or expanded perlite can loosen the filter cake layer. When the filtrate viscosity is high, heating the suspension can reduce viscosity. These measures all help accelerate filtration speed.

HANDTE filter performance characteristics

1. High efficiency and precise filtration: Special structured disc filter technology offers precise and sensitive performance, ensuring that only particles smaller than the required size enter the system, making it the most effective filtration system. Specifications include 5μ, 10μ, 20μ, 55μ, 100μ, 130μ, 200μ, and more. Users can select filter discs with different precisions according to their water usage requirements. System flow rate can be flexibly adjusted as needed. 2. Standard modular design saves space: The system is based on standard disc filter units and designed modularly. Users can select components as needed, offering flexibility and strong interchangeability. The system is compact and occupies minimal space, allowing flexible installation in corner spaces. For example, equipment handling a water volume of approximately 300m3/h occupies only about 6m2 (for general water quality, filtration grade 103μ).

Weidou Intelligent Technology specializes in selling German HANDTE filters, HANDTE filter screens, HANDTE filter elements, HANDTE filtration systems, HANDTE oil filters, HANDTE water purification filters, HANDTE filtering machines, HANDTE filtration equipment, HANDTE filter tubes, HANDTE vacuum filters, HANDTE filter controllers, HANDTE filter valves, HANDTE automatic filters, HANDTE filter ball valves, and HANDTE water strainers. HANDTE products are original imports from Germany. Customers are welcome to inquire and place orders.