TECNO VIBRAZIONI controller, German TECNO VIBRAZIONI model, TECNO VIBRAZIONI price

TECNO VIBRAZIONI controller refers to a master command device that controls the starting, speed regulation, braking, and reversing of an electric motor by changing the wiring of the main circuit or control circuit and changing the resistance value in the circuit according to a predetermined sequence. It consists of a program counter, instruction register, instruction decoder, timing generator, and operation controller, it is the "decision-making mechanism" for issuing commands, that is, it coordinates and directs the operations of the entire computer system. Controllers are divided into combinational logic controllers and microprogrammed controllers, each type of controller has its own advantages and disadvantages. Combinational logic controller design is troublesome, the structure is complex, once the design is completed, it cannot be modified or expanded, but its speed is fast. Microprogrammed controller design is convenient, the structure is simple, modification or expansion is convenient, to modify the function of a machine instruction, only the corresponding microprogram needs to be recompiled; to add a machine instruction, It is only necessary to add a segment of microprogram in the control memory, however, it is achieved by executing a segment of microprogram. The specific comparison is as follows: The combinational logic controller, also known as the hardwired controller, is composed of logic circuits, and relies entirely on hardware to implement instruction functions.

TECNO VIBRAZIONI controller principle

Electromagnetic chuck controller: AC voltage 380V is stepped down by a transformer, rectified by a rectifier into 110V DC, and then enters the chuck through the control device, at which point the chuck is magnetized. For demagnetization, reverse voltage is applied to the circuit, enabling the controller to achieve the demagnetization function. Access control controller: The access control controller operates in two modes. One is the polling mode, and the other is the identification mode. In polling mode, the controller continuously sends query codes to the card reader and receives reply commands from the card reader. This mode continues until the card reader senses a card. When the card reader senses a card, it generates a different reply to the controller's polling command. In this reply command, the card reader transmits the internal code data read from the proximity card to the access control controller, causing the access control controller to enter identification mode. In the identification mode of the access control controller, the controller analyzes the internal code of the proximity card, compares it with the card data stored in the device, and executes subsequent actions. After completing the data reception action, the access control controller sends a command reply to the card reader to restore the card reader's status, and simultaneously, the access control controller returns to polling mode.

TECNO VIBRAZIONI controller structure

1) Instruction register: Used to store the instruction currently being executed. An instruction is divided into two parts: opcode and address code. The opcode indicates the nature of the instruction's operation, such as addition or subtraction; the address code provides the address of the operand for this instruction or relevant information for forming the operand address (the operand address is formed via an address formation circuit). There is an instruction called a branch instruction, which is used to change the normal execution sequence of instructions; the address code part of this instruction provides the address of the instruction to be executed next. 2) Opcode decoder: Used to decode the opcode of an instruction, generate corresponding control levels, and complete the function of analyzing the instruction. 3) Timing circuit: Used to generate time marker signals. In microcomputers, time marker signals are generally three-level: instruction cycle, bus cycle, and clock cycle. The micro-operation command generation circuit produces various micro-operation commands required to complete the operations specified by the instruction. The main basis for generating these commands is the time markers and the nature of the instruction's operation. This circuit is actually the circuit implementation of the expressions for various micro-operation control signals (such as the A→L expression above); it is the most complex part of the combinational logic controller. 4) Instruction counter: Used to form the address of the next instruction to be executed. Usually, instructions are executed sequentially, and instructions are stored sequentially in memory. Therefore, under normal circumstances, the address of the next instruction to be executed can be formed by adding 1 to the current address; the micro-operation command "1" serves this purpose. If a branch instruction is executed, the address of the next instruction to be executed is the target address. This address is located in the address code field of the current branch instruction and is sent directly to the instruction counter. The microprogrammed controller was proposed because combinational logic design has disadvantages such as being difficult to design, inflexible, and not easy to modify or expand.

TECNO VIBRAZIONI controller installation

When installing the controller, avoid the following locations: (1) Ambient temperature exceeds the range of 0~50 degrees Celsius. (2) Relative humidity exceeds 85% or condensation exists (caused by sudden temperature changes or other factors). (3) Direct sunlight exposure. (4) Corrosive and flammable gases, such as hydrogen chloride, hydrogen sulfide, etc. (5) Large amounts of iron chips and dust. (6) Frequent or continuous vibration, with a vibration frequency of 10~55 Hz and an amplitude of 0.5 mm (peak-to-peak). (7) Shock exceeding 10g (gravitational acceleration). To ensure reliable operation of the control system, programmable controllers are usually installed in control cabinets with protective enclosures to prevent dust, oil, and water splashes. To ensure that the temperature remains within the specified ambient temperature range, there should be sufficient ventilation space for the installed equipment, with an interval of more than 30 mm between the basic unit and the expansion unit. If the surrounding environment exceeds 55 degrees Celsius, install an electric fan for forced ventilation. To avoid electrical interference from other peripheral devices, the programmable controller should be kept as far away as possible from high-voltage power lines and high-voltage equipment; a distance of at least 200 mm should be maintained between the programmable controller and high-voltage equipment and power lines.

Weidou Intelligent Technology specializes in selling German TECNO VIBRAZIONI servo drives, TECNO VIBRAZIONI servo amplifiers, TECNO VIBRAZIONI programmable controllers, TECNO VIBRAZIONI control units, TECNO VIBRAZIONI industrial PCs, TECNO VIBRAZIONI logic controllers, TECNO VIBRAZIONI drum controllers, TECNO VIBRAZIONI relay controllers, TECNO VIBRAZIONI control systems, TECNO VIBRAZIONI motion controllers, TECNO VIBRAZIONI microcontrollers, TECNO VIBRAZIONI control modules, TECNO VIBRAZIONI control switches, TECNO VIBRAZIONI servo controllers, TECNO VIBRAZIONI expansion modules, TECNO VIBRAZIONI original imports from Germany. Customers are welcome to inquire and order.