EROGLU controller, German EROGLU model, EROGLU price

The EROGLU controller is a component that directs the various parts of a computer to work in coordination according to the functional requirements of instructions. It serves as the neural center and command hub of the computer, consisting of three components: the instruction register IR, the program counter PC, and the operation controller 0C. It is crucial for coordinating the orderly operation of the entire computer. Each functional component within the CPU performs a specific function. The implementation of control components manages information transfer between components and data flow. The pathways that transmit information between many digital components are commonly referred to as "data paths." Control is required for where information starts, which registers or multiplexers it passes through in the middle, and which register it finally reaches.

EROGLU controller types

1) Low-voltage LED product controller: Low-voltage LED products are generally designed for a voltage of 12V-36V, with 3-6 LED units connected in series per circuit. Resistors are used for voltage reduction and current limiting, keeping the current per circuit below 20mA. A LED product consists of multiple circuits of LED units. Advantages include low voltage, simple structure, and ease of design; disadvantages include high current when the product scale is large, requiring a low-voltage switching power supply. Due to these limitations, low-voltage systems cannot transmit power over long distances and are limited to compact products, such as sign text and small patterns. Based on these characteristics, the controller design specifications are as follows: For 12V, use 75A/30V MOS power transistors for control, with an output current of 8A per circuit; for 24-36V, use 60A/50V MOS power transistors for control, with an output current of 5A per circuit. Users can select the number of controller circuits based on the above specifications. For jumping effects, choose the NE20 low-voltage series; for gradient effects, choose the NE10 low-voltage series controller. Note that LED must use a common anode (+) connection method, with the controller controlling the cathode (-). The controller does not include a low-voltage power supply. 2) High-voltage LED product controller: High-voltage LED products are designed for AC/DC 220V voltage, with 36-48 LED units connected in series per circuit, and the current per circuit is below 20mA. There are two current-limiting methods. One is resistor current limiting, which results in high resistor power consumption. It is recommended to connect one 1/4W metal film resistor in series for every 4 LED units to distribute heat evenly. This connection method is the most stable and reliable. The other is resistor-capacitor series current limiting. In this method, most of the voltage drop occurs across the capacitor, resulting in low resistor power consumption. It can only be used in a stable, continuously lit state. If flashing occurs, the capacitor stores energy, potentially doubling the voltage, which can easily damage the LED. Any LED using a controller must use the resistor current-limiting method. LED typically consumes 5W per meter per circuit, with three-color power consumption at 15W per meter. Common gradient controllers include the NE112K for controlling DC 1200W, and the NE103D for AC loads 4500W and DC loads 1500W. If there are many flashing tube units, use the NE112K; if only overall flashing is required, use the NE103D. If using gradient modes, ensure load matching, as neon lights and LED have different luminous distribution characteristics; different types of loads should not be mixed in the same circuit. 3) Low-voltage serial controller: The characteristic of low-voltage LED product serial controllers is the ability to control many circuits, achieving control via serial signal transmission. Generally, controlling 512 units requires only 4 control lines. Serial LED controllers require registers on the LED light source board. Users can select the NE040S controller model, which has a maximum capacity of 4096KBit. If the load consists of 512 units of LED, it can achieve a maximum of 8192 frames. Additionally, there are controllers used in the safety industry, which are devices that control detectors to monitor gas within various operating zones.

EROGLU controller composition

1) Control memory (Control Memory) is used to store the microprograms corresponding to each machine instruction. The decoder is used to form the entry address for the microprogram corresponding to the machine instruction. When the microinstructions of the microprogram corresponding to a machine instruction are fetched one by one and sent to the microinstruction register, the micro-operation commands are issued according to the pre-designed sequence, thereby completing the function of that machine instruction. This applies to every machine instruction. 2) The width of the microinstruction directly determines the width of the microprogram controller. To simplify the control memory, measures can be taken to shorten the microinstruction width, such as adopting field decoding with single-stage segmented decoding. Obviously, the control field of the microinstruction will be significantly shortened. Some micro-operation commands that need to be generated simultaneously cannot be arranged in the same field. To further shorten the control field, field decoding can be designed with two or more stages.

EROGLU controller applications

For some electronic devices, automatic alarm settings are included. Alarm control is also a frequently used area of microcontroller technology, mainly reflected in the following aspects: First, for some automatic alarm devices, such as fire alarms commonly used in homes, intelligent alarms are triggered when external environmental conditions reach certain levels. If the indoor smoke concentration reaches a certain level, or if collected external data reaches a certain state, the alarm setting is automatically triggered, thereby realizing the intelligent alarm function. Second, for some intelligent electronic devices, if the external environment exceeds the device's operating range, or if there are abnormalities in the device, its own alarm mechanism is triggered. This allows users to promptly understand the device's operational status and provides solutions based on the alarm information. For example, in some factories, equipment is often installed to monitor the production environment. When certain abnormal data occurs, an alarm is triggered. To ensure normal equipment operation, maintenance personnel must handle the issue promptly to avoid major failures.

Weidou Intelligent Technology professionally sells German EROGLU servo drives, EROGLU servo amplifiers, EROGLU programmable controllers, EROGLU control units, EROGLU industrial PCs, EROGLU logic controllers, EROGLU drum controllers, EROGLU relay controllers, EROGLU control systems, EROGLU motion controllers, EROGLU microcontrollers, EROGLU control modules, EROGLU control switches, EROGLU servo controllers, and EROGLU expansion modules. EROGLU products are original imports from Germany. Customers are welcome to inquire and place orders.