German viking plug viking model viking price

viking plugs are accessory products used to achieve electrical connections and are classified industrially as connectors. As the level of industrial automation increases and industrial control requirements become stricter and more precise, the usage of terminal blocks is gradually rising. With the development of the electronics industry, the scope of use for terminal blocks is expanding, and their varieties are increasing. Besides PCB board terminals, the most widely used types include hardware terminals, nut terminals, spring terminals, and so on. Terminal blocks are applied to facilitate wire connections; they are essentially metal strips enclosed in insulating plastic, with holes at both ends for inserting wires and screws for tightening or loosening. For example, two wires may sometimes need to be connected and sometimes disconnected; in such cases, terminals can be used to connect them and allow for disconnection at any time without the need for soldering or twisting them together, which is very convenient and fast. They are also suitable for interconnecting large numbers of wires. In the power industry, there are dedicated terminal strips and terminal boxes filled with terminal blocks, including single-layer, double-layer, current, voltage, standard, and disconnectable types. A certain crimping area is required to ensure reliable contact and to guarantee that sufficient current can pass through.

viking plug applications

Mainly applied in industries such as lighting, communications, and security. Plug-in terminals have the widest range of applications, such as in variable frequency drives, explosion-proof equipment, CNC panels, access control controllers, sensors, PLC, instruments, power supplies, servo drives. The common requirements for plug-in terminals in these application industries are: smooth insertion and extraction force, low contact resistance, and the ability to meet certain life and fatigue standards, which imposes higher requirements on the material of the metal spring clips. This requires product designers to have certain experience in structure and material selection. Barrier-type terminals are mainly applied in: power supplies, relays (especially double-layer terminals), inverters, the elevator industry (less common), and air conditioning. The requirements for this series of terminals are high torque requirements for the screws during wire clamping, the distance when the screw is retracted to its highest position must be greater than the maximum wire clamping range, long-position terminals must not warp or deform, and the screws must have high corrosion resistance.

viking plug types

Common data buses include ISA, EISA, VESA, PCI, etc. The "AB address bus" is specifically used to transmit addresses. Since addresses can only be transmitted from the CPU to external memory or I/O ports, the address bus is always unidirectional and tri-state, which differs from the data bus. The bit width of the address bus determines the size of the memory space that the CPU can directly address. For example, if an 8-bit microcomputer has an 16-bit address bus, its maximum addressable space is 2^16=64KB. An 16-bit microcomputer (x-bit processor refers to the number of bits (1, 0) that the microprocessor can process within one clock cycle, i.e., the word length) has an 20-bit address bus, and its addressable space is 2^20=1MB. Generally speaking, if the address bus is n bits, the addressable space is 2^n bytes. The "CB control bus" is used to transmit control signals and timing signals. Among control signals, some are sent by the microprocessor to memory and I/O interface circuits, such as read/write signals, chip select signals, and interrupt response signals; others are fed back to the CPU by other components, such as interrupt request signals, reset signals, bus request signals, and device ready signals. Therefore, the transmission direction of the control bus is determined by the specific control signal, and the information is generally bidirectional. The bit width of the control bus depends on the actual control needs of the system. In practice, the specific situation of the control bus mainly depends on the CPU. According to the method of data transmission, buses can be divided into serial buses and parallel buses. In serial buses, binary data is sent bit by bit through a single data line to the destination device; parallel buses typically have more than 2 data lines. Common serial buses include SPI, I2C, USB, and RS232. According to whether the clock signal is independent, buses can be divided into synchronous and asynchronous buses. The clock signal of a synchronous bus is independent of the data, while the clock signal of an asynchronous bus is extracted from the data. SPI and I2C are synchronous serial buses, while RS232 uses an asynchronous serial bus.

viking plug applications

Each bus largely has its own application areas. For example, FF and PROFIBUS-PA are suitable for process control in industries such as petroleum, chemical, pharmaceutical, and metallurgy; LonWorks, PROFIBUS-FMS, and DevieceNet are suitable for buildings, transportation, agriculture, and other fields; DeviceNet and PROFIBUS-DP are suitable for the manufacturing and processing industry. However, these divisions are not absolute, as each fieldbus strives to expand its application areas and penetrate each other's markets. Most fieldbuses are backed by one or several large multinational corporations that have established corresponding international organizations to expand their influence and gain more market share. For example, PROFIBUS is mainly supported by Siemens Company, which established the PROFIBUS International User Organization. WorldFIP is mainly backed by Alstom Company, which established the WorldFIP International User Organization.

Weidou Intelligent Technology professionally sells German viking connectors, viking connectors, viking interface modules, viking terminal blocks, viking bus interfaces, viking bus modules, viking communication modules, viking fieldbus, viking plug interfaces, viking communication interfaces, viking adapters, viking output modules, viking distributor converters, viking plug bus, viking expansion modules, viking original German imports. We welcome customers to inquire and order.