German Saia-Burgess plug, Saia-Burgess model, Saia-Burgess price

Saia-Burgess plug is a common line or path used in computers to connect various functional components and transmit data between them. In computer systems, buses can be classified according to the objects they connect: Chip bus, also known as device-level bus, which is the bus inside the central processing unit chip. Internal bus, also known as system bus or board-level bus, which is the transmission path between various functional components of the computer; the microcomputer bus is usually called the internal bus. External bus, also known as communication bus, which is the transmission path between computer systems, or between the computer host and peripheral devices. In computer systems, the common path for transmitting information between various components is called the bus, and microcomputers use a bus structure to connect various functional components.

Saia-Burgess plug principle

A bus is a shared data transmission device. Although multiple devices can be connected to the bus, typically only one pair of devices participates in data transmission at any given time. According to the form of information transmission, buses can be divided into parallel buses and serial buses. A parallel bus transmits n bits of binary information simultaneously using n transmission lines. Its characteristics are high transmission speed, but the system structure is more complex; it is used for connections between various components within a computer system. A serial bus shares one transmission line for multi-bit binary information, with the bits passing through the bus in chronological order. Its characteristics are simple structure, but slower transmission speed. The bus must have clear specifications: Bus timing protocol, meaning that certain timing rules must be followed when transmitting information on the bus, such as synchronous bus timing, asynchronous bus timing, and semi-synchronous bus timing. Physical characteristics of the bus, including electrical characteristics of signals, power, and addresses, as well as mechanical characteristics of wiring and connectors. Bus bandwidth, which is the maximum transmission rate achievable by the bus, with the unit being MB/S.

Saia-Burgess plug classification

Buses can be divided into five major types according to function and specification: Data bus (Data Bus): Transmits data that needs to be processed or stored back and forth between the CPU and RAM. Address bus (Address Bus): Used to specify the address of data stored in RAM (Random Access Memory). Control bus (Control Bus): Transmits signals from the microprocessor control unit (Control Unit) to peripheral devices. Expansion bus (Expansion Bus): A bus for data communication between external devices and the computer host, such as ISA bus and PCI bus. Local bus (Local Bus): Replaces expansion buses for higher-speed data transmission. Among these, the data bus DB (Data Bus), address bus AB (Address Bus), and control bus CB (Control Bus) are collectively referred to as the system bus, which is what is commonly meant by "bus". In some systems, the data bus and address bus are multiplexed, meaning that signals on the bus represent data at certain times and addresses at other times; while in other systems, they are separate. The address bus and data bus of the 51 series microcontrollers are multiplexed, whereas buses in general PC systems are separate. The "data bus DB" is used to transmit data information. The data bus is a bidirectional tri-state bus, meaning it can transmit data from the CPU to memory or I/O interfaces and other components, and can also transmit data from other components to the CPU. The bit width of the data bus is an important indicator of a microcomputer, usually consistent with the word length of the microprocessor. For example, the Intel 8086 microprocessor has a word length of 16 bits, and its data bus width is also 16 bits. It should be pointed out that the meaning of "data" is broad; it can be actual data, instruction code, or status information, and sometimes even control information. Therefore, in practical work, what is transmitted on the data bus is not necessarily just data in the strict sense.

Saia-Burgess plug main parameters

1) Rated voltage: Also known as operating voltage, it mainly depends on the insulating materials used in the connector and the spacing between contact pairs. Certain components or devices may fail to perform their intended functions when operated below their rated voltage. The rated voltage of a connector should effectively be understood as the maximum operating voltage recommended by the manufacturer. In principle, connectors can operate normally at voltages below the rated value. The author recommends selecting the rated voltage reasonably based on the connector's dielectric strength (withstand voltage) specifications, according to the operating environment and safety level requirements. This means that with the same withstand voltage specification, different maximum operating voltages can be applied depending on the specific operating environment and safety requirements, which better aligns with actual usage conditions. 2) Rated current: Also known as operating current. Similar to rated voltage, connectors generally operate normally when the current is below the rated value. During the connector design process, thermal design is employed to meet rated current requirements, because when current flows through the contact pair, heat is generated due to conductor resistance and contact resistance. If the temperature rise exceeds a certain limit, it will damage the connector's insulation and cause softening of the contact pair's surface plating, leading to failures. Therefore, limiting the rated current effectively means limiting the internal temperature rise of the connector to not exceed the designed specified value. An important consideration during selection is that for multi-core connectors, the rated current must be derated. This requires particular attention in high-current applications; for example, for 3.5mm contact pairs, the rated current is generally specified as 50A, but when used in a 5-core configuration, it must be derated by 33%, meaning the rated current per core is only 38A. The greater the number of cores, the larger the derating amplitude. 3) Contact resistance: Contact resistance refers to the resistance generated at the contact interface between two conductive contacts. Two issues should be noted during selection: First, the connector's contact resistance specification actually refers to the contact pair resistance, which includes both the contact resistance and the conductor resistance of the contact pair. Since conductor resistance is typically small, the contact pair resistance is often referred to as contact resistance in many technical specifications. Second, in circuits carrying small signals, attention must be paid to the conditions under which the specified contact resistance is tested, because oxide layers, oil stains, or other contaminants on the contact surfaces can create film resistance. As the film thickness increases, the resistance rises rapidly, causing the film to act as a poor conductor. However, the film layer can undergo mechanical breakdown under high contact pressure, or electrical breakdown under high voltage and high current. For some compact connectors designed with relatively low contact pressure, where the application involves only mA and mV levels, the film resistance may not break down easily, potentially affecting signal transmission. One of the contact resistance test methods specified in GB5095 "Basic Test Procedures and Measurement Methods for Electromechanical Components Used in Electrical Equipment," namely the "Contact Resistance - Millivolt Method," stipulates that to prevent breakdown of the insulating film on the contacts, the DC or AC peak open-circuit electromotive force of the test circuit shall not exceed 20mV, and the DC or AC test current shall not exceed 100mA. 4) Shielding: In modern electrical and electronic equipment, the increasing density of components and their interrelated functions impose strict limits on electromagnetic interference. Therefore, connectors are often enclosed in metal housings to prevent internal electromagnetic radiation or interference from external electromagnetic fields. At low frequencies, only magnetic materials provide significant shielding against magnetic fields. In such cases, there are specific requirements for the electrical continuity of the metal housing, which relates to the housing contact resistance.

Weidou Intelligent Technology specializes in selling German Saia-Burgess connectors, Saia-Burgess plugs, Saia-Burgess interface modules, Saia-Burgess terminal blocks, Saia-Burgess bus interfaces, Saia-Burgess bus modules, Saia-Burgess communication modules, Saia-Burgess fieldbus, Saia-Burgess plug interfaces, Saia-Burgess communication interfaces, Saia-Burgess adapters, Saia-Burgess output modules, Saia-Burgess distributor converters, Saia-Burgess plug buses, Saia-Burgess expansion modules, Saia-Burgess original imports from Germany. Welcome customers to inquire and order.