German robbe plug robbe model robbe price

robbe plugs are accessory products used to achieve electrical connections and are categorized industrially as connectors. As industrial automation levels rise and industrial control requirements become increasingly strict and precise, the consumption of terminal blocks is gradually increasing. With the development of the electronics industry, the scope of use for terminal blocks is expanding, and their varieties are becoming more diverse. Besides PCB board terminals, the most widely used types include hardware terminals, nut terminals, spring terminals, and more. Terminal blocks are applied to facilitate wire connections; they are essentially metal strips enclosed in insulating plastic, with holes at both ends for inserting wires and screws for tightening or loosening. For example, two wires may need to be connected at times and disconnected at others; in such cases, terminals can be used to connect them, allowing for disconnection at any time without the need for welding or twisting, which is very convenient and quick. They are also suitable for interconnecting large numbers of wires. In the power industry, there are dedicated terminal strips and terminal boxes filled with terminal blocks, including single-layer, double-layer, current, voltage, standard, and disconnectable types. A certain crimping area is required to ensure reliable contact and sufficient current carrying capacity.

robbe plug classification

Terminal blocks can be classified into European-style terminal block series, pluggable terminal block series, transformer terminal blocks, building wiring terminals, barrier-type terminal block series, spring-type terminal block series, DIN rail-mounted terminal block series, wall-through terminal block series, and optocoupler terminal blocks. Pluggable types consist of two parts that connect via plug-in: one part clamps the wire and then plugs into the other part, which is soldered onto the PCB board. The mechanical principle at the base and the anti-vibration design ensure long-term airtight connections and product reliability. Assembly ears can be added to both ends of the socket; these ears largely protect the contacts and prevent poor alignment, while the socket design ensures correct insertion into the housing. Sockets can also feature assembly clips and locking clips. Assembly clips provide more secure fixation to the PCB board, and locking clips can lock the housing and socket after installation. Various socket designs accommodate different insertion methods into housings, such as horizontal, vertical, or angled orientation relative to the printed circuit board, allowing selection based on customer requirements. Both metric and standard wire gauges can be selected, making this the best-selling terminal type on the market. Barrier-type terminals enable safe, reliable, and effective connections, especially in high-current and high-voltage environments. Spring-type terminals are a new type utilizing spring mechanisms, widely used in global electrical and electronic engineering industries: lighting, elevator control, instrumentation, power supplies, chemical, and automotive power applications. DIN rail mounting adopts reliable screw connection technology, electronic fuse technology, and the latest electrical connection technology, widely used in power electronics, communications, electrical control, and power supply fields. DIN rail-mounted types use wire clamping and unique self-locking screw designs to ensure reliable and safe connections. This series features an aesthetically pleasing appearance and can be equipped with various accessories such as short-circuit bridges, marking strips, and partitions. Wall-through types use screw connection technology; the insulation material is PA66 (flammability rating: UL94, V-0), and the connectors use high-quality highly conductive metal materials.

robbe plug types

Common data buses include ISA, EISA, VESA, PCI, etc. The "address bus AB" is dedicated to transmitting addresses. Since addresses can only be transmitted from the CPU to external memory or I/O ports, the address bus is always unidirectional and tri-state, unlike the data bus. The bit width of the address bus determines the size of the memory space directly addressable by the CPU. For example, if an 8-bit microcomputer has an 16-bit address bus, its maximum addressable space is 2^16=64KB. The address bus of a 16-bit microcomputer (x-bit processor refers to the number of bits (1, 0) the microprocessor can process in one clock cycle, i.e., the word length) is 20 bits, and its addressable space is 2^20=1MB. Generally, if the address bus is n bits, the addressable space is 2^n bytes. The "control bus CB" is used to transmit control signals and timing signals. Among control signals, some are sent by the microprocessor to memory and I/O interface circuits, such as read/write signals, chip select signals, and interrupt response signals; others are fed back to the CPU by other components, such as interrupt request signals, reset signals, bus request signals, and device ready signals. Therefore, the transmission direction of the control bus depends on the specific control signal, and information flow is generally bidirectional. The bit width of the control bus is determined by the actual control needs of the system. In practice, the specific configuration of the control bus mainly depends on the CPU. Based on data transmission methods, buses can be divided into serial buses and parallel buses. In serial buses, binary data is sent bit by bit through a single data line to the destination device; parallel buses typically have more than 2 data lines. Common serial buses include SPI, I2C, USB, and RS232. Based on whether the clock signal is independent, buses can be divided into synchronous and asynchronous buses. The clock signal of a synchronous bus is independent of the data, whereas the clock signal of an asynchronous bus is extracted from the data. SPI and I2C are synchronous serial buses, while RS232 uses an asynchronous serial bus.

robbe plug applications

Each bus type has its specific application areas. For instance, FF and PROFIBUS-PA are suitable for process control in industries such as petroleum, chemical, pharmaceutical, and metallurgy; LonWorks, PROFIBUS-FMS, and DevieceNet are suitable for buildings, transportation, agriculture, and other fields; DeviceNet and PROFIBUS-DP are suitable for the manufacturing industry. However, these divisions are not absolute, as each fieldbus strives to expand its application areas and penetrate each other's markets. Most fieldbuses are backed by one or several large multinational corporations that have established corresponding international organizations to expand their influence and gain greater market share. For example, PROFIBUS is primarily supported by Siemens Company, which established the PROFIBUS International User Organization. WorldFIP is primarily backed by Alstom Company, which established the WorldFIP International User Organization.

Weidou Intelligent Technology specializes in selling German robbe connectors, robbe connectors, robbe interface modules, robbe terminal blocks, robbe bus interfaces, robbe bus modules, robbe communication modules, robbe fieldbus, robbe plug interfaces, robbe communication interfaces, robbe adapters, robbe output modules, robbe distributor converters, robbe plug bus, robbe expansion modules, robbe original German imports. We welcome inquiries and orders from customers.