German pizzato plug pizzato model pizzato price

pizzato plugs are conductive devices that bridge two conductors in a circuit, allowing current or signals to flow from one conductor to another. An electronic connector is an electromechanical system that provides a separable interface for connecting two subsystems. Simply put, components used to complete electrical connections between circuits or electronic devices are called connectors, acting as a bridge between them. In addition to meeting general performance requirements, it is particularly important that electrical connectors achieve good contact, reliable operation, and easy maintenance. Their reliability directly affects the normal operation of aircraft circuits and involves the safety of the entire host. Therefore, host circuits have very strict requirements for the quality and reliability of electrical connectors. It is precisely because of the high quality and high reliability of electrical connectors that they are widely used in military systems such as aviation, aerospace, and national defense. Common classification methods for electrical connectors include appearance, structure, and application.

pizzato plug structure

An electrical connector consists of a fixed-end electrical connector, i.e., female contacts (referred to as sockets), and a free-end electrical connector, i.e., male contacts (referred to as plugs). The socket is fixed to the powered component via its square (or round) flange (some also use welding), while the plug is generally connected to a cable, achieving the plug-socket connection through a coupling nut. Electrical connectors consist of three basic units: housing, insulator, and contacts. 1) Housing: The electrical connector housing refers to the outer shell of the plug and socket, the coupling nut, and the rear accessories. The housing protects internal parts such as the insulator and contacts (collectively referred to as pins and sockets) from damage. Positioning key slots on the top ensure proper alignment of the plug and socket. The coupling nut is used for connecting and disconnecting the plug and socket. Rear accessories protect the wire-to-contact termination from damage and secure the cable. The housing also provides a certain degree of electromagnetic shielding. Housings are generally machined from aluminum alloy (machining, cold extrusion, die casting). Steel housings are mostly used for glass-sealed and high-temperature electrical connectors. 2) Insulator: Composed of pin insulators, socket insulators, interface seals, and wire seals. It holds pins and sockets in their designated positions and provides electrical insulation between contacts and between contacts and the housing. Sealing measures are achieved through the insulator, interface seals, and wire seals to improve the environmental resistance of the electrical connector. To adapt to high temperature, low temperature, and flame retardancy requirements, and to ensure stable and reliable geometric dimensions of parts, insulators are mostly molded from thermosetting plastics. Interface seals and wire seals are formed by molding silicone rubber, etc. 3) Contacts: Contacts include male and female contacts, sometimes referred to as pins and sockets. Connection methods include soldering, crimping, press-fit, and wire wrapping, used to achieve circuit connections. Pins and sockets are key components of electrical connectors, directly affecting their reliability. Pins and sockets are mostly machined from elastic copper alloys with good conductivity, and surfaces are silver- or gold-plated to achieve low contact resistance and corrosion resistance. Sockets generally include split-type, wire-spring, crown-spring, and stamped types. Structural features include: environmental resistance, bayonet (quick) connection, multi-key positioning (anti-misinsertion), crimped connection between contacts and wires (single-wire insertion/removal facilitates fault handling). The housing plus a shielding ring ensures 360° electromagnetic interference shielding capability.

pizzato plug classification

1) By appearance: circular electrical connectors, rectangular electrical connectors. Due to their structural characteristics, circular electrical connectors are most widely used in military equipment (aviation, aerospace). Rectangular electrical connectors, due to their simple structure, are more commonly used on printed circuit boards of electronic devices. 2) By structure: By connection method: threaded connection, bayonet (quick) connection, latch connection, push-pull connection, direct insertion, etc.; By contact termination form: crimping, soldering, wire wrapping; screw (cap) fixation; By environmental protection: environmental-resistant electrical connectors and standard electrical connectors. 3) By application: RF electrical connectors, sealed electrical connectors (glass-sealed), high-temperature electrical connectors, automatic breakaway electrical connectors, filter electrical connectors, composite material electrical connectors, airport power electrical connectors, printed circuit board electrical connectors, etc.

pizzato plug usage precautions

Fieldbus is gradually being promoted in industrial sites. Many devices not only have traditional instrument functions but also possess fieldbus capabilities. In DCS, fieldbus is widely used. The following issues should be noted when using fieldbus: 1) Communication distance. Fieldbus communication distance generally has certain requirements. For example, PROFIBUS/DP at a rate of 12Mbps can reach 200m using standard cable. If a rate of 187.5kbps is used, it can reach 1 000m. Communication distance has two meanings: first, the distance achievable between two nodes without repeaters; generally, distance is inversely proportional to communication rate; second, the distance between the two farthest nodes in the entire network. Manufacturers' descriptions of this are often unclear. In actual use, the scope of the entire network must be considered. Electromagnetic signals take time to transmit through cables. Especially in some high-speed fieldbuses, if the distance is increased, some communication parameters must be modified; 2) Cable selection. The site environment determines the fieldbus communication speed and medium. Generally, fieldbus uses electrical signals to transmit data, inevitably affected by the surrounding electromagnetic environment during transmission. Most fieldbuses use shielded twisted pair cables. Note that different types of fieldbuses may require different shielded twisted pair cables. Fieldbus developers generally specify a special cable, and the specified rate and transmission distance can only be achieved when this cable is used correctly. In extremely harsh electromagnetic conditions, optical fiber is a reasonable choice; otherwise, local interference may affect the operation of the entire fieldbus network; 3) Isolation. Generally, fieldbus electrical signals are electrically isolated from the device interior. Fieldbus cables are distributed throughout the workshop. If high voltage intrudes, it will damage the bus transceivers of all devices on the network segment. Without isolation, high voltage signals will continue to damage other internal circuits of the device, leading to serious consequences; 4) Shielding. The outer layer of the shielded cable used for fieldbus must be grounded at a single point. If high-frequency interference is severe, multi-point capacitive grounding can be used. Multi-point direct grounding is not allowed to avoid ground loop currents; 5) Connectors. Fieldbus generally does not have strict regulations for connectors, but improper handling can affect system communication. For example, fieldbus generally uses a bus-type daisy chain connection. When connecting each device, attention must be paid to how to insert and remove equipment without affecting existing communication, which places certain requirements on connectors; 6) Termination matching. Fieldbus signals, like all electromagnetic wave signals, exhibit reflection. Resistive matching should be used at both ends of each network segment. The first function is to absorb reflections, and the second is to achieve correct voltage levels at both ends of the bus to ensure communication. Therefore, fieldbus technology is the intersection and integration of control, computer, and communication technologies. Its emergence and rapid development reflect the control field's requirements for cost reduction, improved reliability, enhanced maintainability, and intelligent data acquisition.

Weidou Intelligent Technology professionally sells German pizzato connectors, pizzato connectors, pizzato interface modules, pizzato terminal blocks, pizzato bus interfaces, pizzato bus modules, pizzato communication modules, pizzato fieldbus, pizzato plug interfaces, pizzato communication interfaces, pizzato adapters, pizzato output modules, pizzato distributor converters, pizzato plug bus, pizzato expansion modules, pizzato original German imports. Welcome customers to inquire and order.