German EKK Anlagentechnik plug, EKK Anlagentechnik model, EKK Anlagentechnik price

EKK Anlagentechnik plug is a control module that can output a signal or provide a discrete signal to actuate controlled equipment when control is required. It can also receive feedback signals from the equipment to report to the host, making it an important component of fire alarm linkage systems. Input/output modules on the market can provide a pair of passive normally open/normally closed contacts to control the controlled equipment. Some manufacturers' modules can be configured via parameters for active output (such as GST GST-LD-8301). Corresponding types include dual input/output modules and multi-input/output modules. During a fire alarm, the alarm controller activates external linked devices via the output module, such as smoke exhaust valves, air supply valves, fire shutters, fans, and alarm bells, and can receive action confirmation from the devices. The output module is connected to the controller's loop bus and can be installed near the controlled equipment or in the floor terminal module box. It uses electronic coding for on-site addressing. The output control logic of the output module can be programmed according to project requirements. When the controller receives an alarm signal from a detector, it sends the linkage control signal to the output module via the bus according to the pre-programmed procedure. The output module then activates the required fire protection equipment; after the device acts, a confirmation signal is received.

EKK Anlagentechnik plug composition

The fieldbus control system consists of three parts: the measurement system, the control system, and the management system. The hardware and software of the communication part are its most distinctive features. 1) Fieldbus control system: Its software is an important part of the system. Control system software includes configuration software, maintenance software, simulation software, device software, and monitoring software. First, select the development configuration software and the human-machine interface software for control operations. Through the configuration software, complete the connections between function blocks, select function block parameters, and perform network configuration. During network operation, the system collects data in real time, processes data, and performs calculations. It optimizes control and logical control, alarms, monitoring, display, reports, etc. 2) Fieldbus measurement system: It features multi-variable high-performance measurement, giving measuring instruments additional functions such as computing capability. Due to the use of digital signals, it has high resolution, high accuracy, strong anti-interference, and strong anti-distortion capabilities. It also provides status information of instrument equipment, allowing adjustment of the processing process. 3) Equipment management system: It can provide diagnostic information, management information, equipment operating status information (including smart instruments), and equipment manufacturing information provided by manufacturers. For example, Fisher—Rosemoune Company launched the AMS management system. Installed in the main computer, it performs management functions and can form a comprehensive management system information database for field devices. Based on this, equipment reliability analysis and predictive maintenance are realized, changing the passive management mode to a predictable management and maintenance mode. The AMS software is based on a T architecture with the field server as the platform. Supporting modularity on the field server, feature-rich application software provides users with a graphical interface. 4) Bus system computer service mode: The client/server mode is a popular network computer service mode. The server represents the data source (provider), and the application client represents the data user, which obtains data from the data source and further processes it. The client runs on a PC or workstation. The server runs on a minicomputer or mainframe, using the intelligence, resources, and data of both parties to complete tasks. 5) Database: It can organically and dynamically store large amounts of data and applications, achieving full data sharing and cross-access with high independence. Industrial equipment parameters change continuously during operation, resulting in large data volumes and high real-time requirements for operation and control. Therefore, a distributed and real-time database system capable of mutual access and operation is formed. Mature options on the market include relational databases such as Oracle, sybas, Informix, and SQL Server; and real-time databases such as Infoplus, PI, and ONSPEC. 6) Network system hardware and software: Network system hardware includes system management hosts, servers, gateways, protocol converters, hubs, user computers, and underlying intelligent instruments. Network system software includes network operating software such as NetWarc, LAN Mangger, and Vines; server operating software such as Lunix, os/2, and Window NT; application software databases, communication protocols, and network management protocols.

EKK Anlagentechnik plug material

Material selection is based on a comprehensive consideration of processability, product applicability, and strength properties. The cost of electronic connectors varies depending on material prices, processing difficulty, and production efficiency. Electronic connector materials mainly include insulator materials (plastic raw materials) and conductor materials (phosphor bronze, brass). Common engineering plastics for electronic connectors include: LCP, NYLON, and PBT. 1) LCP: It has a small linear expansion coefficient, low injection molding shrinkage, outstanding strength and elastic modulus, and excellent heat resistance. Some grades have a high load deformation temperature, up to 340 degrees or more. LCP also has excellent chemical resistance and airtightness. Therefore, it is the first choice for connectors, especially those requiring SMT, such as eg:MINI PCI EXPRESS; DDR. 2) NYLON: Lower cost, very high tensile strength, outstanding wear resistance and self-lubricity, good flowability, beneficial for thin-wall molding. However, it shrinks significantly and is prone to burrs. Strict baking is required before molding to prevent hydrolysis. General connectors, especially DIP, mostly use NYLON material, such as eg:PCI 120P; PCI EXPRESS. 3) PBT: Plug-in electronic connectors. Low cost, high strength, wear-resistant, but poor moldability and significant shrinkage. Due to the lower melting temperature, plastic melting may occur during wave soldering.

EKK Anlagentechnik plug wiring method

1) Apply moderate force when tightening connections to prevent stripping the threads of bolts and nuts due to excessive force. Replace any stripped bolts and nuts immediately; do not continue using them. 2) When tightening or loosening screws with a screwdriver, ensure the screwdriver tip fits tightly against the screw head before applying force to prevent slipping, which can damage the screw and make disassembly difficult, especially for common circuit breakers in distribution boxes. 3) If bolts and nuts are difficult to remove, do not act rashly to prevent deformation that makes removal even harder. Tap them appropriately or apply screw loosening agents or dilute hydrochloric acid, then attempt removal after a short wait. 4) Do not use pliers to tighten or loosen bolts and nuts to prevent damage. When using an adjustable wrench, adjust the jaw opening properly to prevent damaging or deforming the bolts and nuts, which would make disassembly difficult. 5) A single terminal block allows connection of at most two wires of the same type and specification. 6) For terminal blocks prone to loosening or poor contact, wire ends must be fastened in a "U" shape to the terminal block to increase contact area and prevent loosening. 7) When connecting wire ends or lugs to each other, it is strictly prohibited to insert non-copper or poorly conductive washers in between. 8) When connecting wire ends, the contact surfaces must be smooth and free of oxidation. When connecting lugs or copper bars, clean the contact surfaces, apply conductive paste, and then tighten. 9) When connecting temporary lines, single-strand flexible wires should be folded once at the end before connecting to the lower terminal of the circuit breaker. Single-core solid wires should be connected to the lower terminal of the circuit breaker in a "U" shape. 10) For motor wiring of 30KW and above, it is required that no poorly conductive washers (such as galvanized nuts, flat washers, spring washers, etc.) be inserted between the motor output leads and the cable wires connecting to the motor. 11) When wrapping cables or other equipment requiring insulation protection with insulating tape, wrap from one end to the other with a 1/2 overlap ratio, ensuring at least one back-and-forth layer.

Weidou Intelligent Technology specializes in selling German EKK Anlagentechnik connectors, EKK Anlagentechnik connectors, EKK Anlagentechnik interface modules, EKK Anlagentechnik terminal blocks, EKK Anlagentechnik bus interfaces, EKK Anlagentechnik bus modules, EKK Anlagentechnik communication modules, EKK Anlagentechnik fieldbus, EKK Anlagentechnik plug interfaces, EKK Anlagentechnik communication interfaces, EKK Anlagentechnik adapters, EKK Anlagentechnik output modules, EKK Anlagentechnik distributor converters, EKK Anlagentechnik plug bus, EKK Anlagentechnik expansion modules. EKK Anlagentechnik original imports from Germany. Welcome inquiries and orders.