German DRAGO plug DRAGO model DRAGO price

DRAGO plugs are conductive devices that bridge two conductors in a circuit, allowing current or signals to flow from one conductor to another. They are widely used in various electrical circuits to connect or disconnect current or signals. This connection may be temporary and convenient for plugging and unplugging at any time, or it may be a permanent junction between electrical equipment or wires. Electronic connectors are devices that transmit electronic signals (analog or digital signals), providing a separable interface to connect two sub-electronic systems, and are components used to complete electrical connections between circuits or electronic machines. Examples include power plugs/sockets, IC sockets, and telephone line plugs. They are widely used in the electronics industry. An electronic connector is an electromechanical system that provides a separable interface to connect two sub-electronic systems; simply put, components used to complete electrical connections between circuits or electronic machines are called connectors, acting as a bridge between them. Electronics can serve as electrical/electronic transmission and connection components between circuits, components, and systems, enabling stable and reliable flow of power, signals, and current, while facilitating product assembly, maintenance, and replacement.

DRAGO plug working principle

If the Mother Board is a city, then the bus is like the public buses in the city, transporting bits that operate back and forth along fixed routes. These lines can only transmit one bit at a time. Therefore, multiple lines must be used simultaneously to transmit more data, and the number of data items the bus can transmit simultaneously is called the width, measured in bits; the greater the width, the better the transmission performance. The bus bandwidth (i.e., the total amount of data that can be transmitted per unit time) is: bus bandwidth = frequency x width (Bytes/sec). When the bus is idle (other devices are connected to the bus in a high-impedance state) and a device needs to communicate with a target device, the initiating device drives the bus, sending address and data. Other devices connected to the bus in a high-impedance state, upon receiving (or being able to receive) address information matching their own, accept the data on the bus. After the sending device completes communication, it releases the bus (output changes to high-impedance state).

DRAGO plug material

Material selection is based on a comprehensive consideration of processability, product applicability, and strength properties; the cost of electronic connectors varies depending on material prices, processing difficulty, and production efficiency; electronic connector materials mainly include insulator materials (plastic raw materials) and conductor materials (phosphor bronze, brass); common engineering plastics for electronic connectors include: LCP, NYLON, PBT. 1) LCP: Features a low coefficient of linear expansion, low injection molding shrinkage, outstanding strength and elastic modulus, and excellent heat resistance, with a high heat deflection temperature, some exceeding 340 degrees. LCP also has excellent chemical resistance and air tightness, so it is the first choice for LCP material for general connectors, especially those requiring SMT, eg:MINI PCI EXPRESS; DDR. 2) NYLON: Lower cost, very high tensile strength, outstanding wear resistance and self-lubricity, good fluidity, beneficial for thin-wall molding, but severe shrinkage, prone to burrs, and requires strict baking before molding to prevent hydrolysis. General connectors, especially DIP, mostly use NYLON material, eg:PCI 120P; PCI EXPRESS. 3) PBT: Plug-in electronic connectors, low cost, high strength, wear-resistant, but poor moldability, severe shrinkage, and due to lower melting temperature, plastic melting phenomena occur during wave soldering.

DRAGO plug assembly

The northbridge chip on the motherboard is responsible for connecting components with the highest data throughput, such as memory and graphics cards, and links to the southbridge chip. The CPU connects to the northbridge chip via the front-side bus (FSB), and then exchanges data with memory and graphics cards through the northbridge chip. The front-side bus is the primary channel for the CPU to exchange data with external components; therefore, its data transfer capability significantly impacts overall computer performance. Without a sufficiently fast front-side bus, even a powerful CPU cannot substantially improve overall system speed. The maximum data bandwidth depends on the width of all simultaneously transferred data and the transmission frequency, i.e., Data Bandwidth = (Bus Frequency × Data Width) ÷ 8. The front-side bus frequencies achievable on a PC include 266MHz, 333MHz, 400MHz, 533MHz, and 800MHz. A higher front-side bus frequency indicates greater data transfer capability between the CPU and the northbridge chip, allowing the CPU's capabilities to be fully utilized. CPU technology develops rapidly, with computational speeds increasing quickly. A sufficiently large front-side bus ensures adequate data supply to the CPU, whereas a lower front-side bus cannot provide enough data to the CPU, thereby limiting the performance of the CPU and becoming a system bottleneck.

Weidou Intelligent Technology specializes in selling German DRAGO connectors, DRAGO connectors, DRAGO interface modules, DRAGO terminal blocks, DRAGO bus interfaces, DRAGO bus modules, DRAGO communication modules, DRAGO fieldbus, DRAGO plug interfaces, DRAGO communication interfaces, DRAGO adapters, DRAGO output modules, DRAGO distributor converters, DRAGO plug bus, DRAGO expansion modules, DRAGO original imports from Germany. Welcome customers to inquire and order.