German AXIOMATIC plug AXIOMATIC model AXIOMATIC price

AXIOMATIC plug refers to the interface between the central processing unit and the standard communication subsystem. For example: RS232 interface. The RS232 interface is a serial port. Data transmission between computers or between a computer and a terminal can use two methods: serial communication and parallel communication. Serial communication is widely adopted because it uses fewer lines, has low cost, and avoids inconsistencies in multiple line characteristics, especially during long-distance transmission. In serial communication, both communicating parties are required to use a standard interface so that different devices can be easily connected for communication. The RS-232-C interface (also known as EIA RS-232-C) is the most commonly used serial communication interface. It was established in 1970 by the Electronic Industries Association (EIA) together with Bell System, modem manufacturers, and computer terminal manufacturers as a standard for serial communication. Its full name is "Technical Standard for Serial Binary Data Exchange Interface between Data Terminal Equipment (DTE) and Data Communication Equipment (DCE)." This standard specifies the use of a 25-pin DB25 connector, defines the signal content for each pin of the connector, and specifies the voltage levels for various signals.

AXIOMATIC plug classification

Terminal blocks can be divided into European-style terminal block series, pluggable terminal block series, transformer terminal blocks, building wiring terminals, barrier-type terminal block series, spring-type terminal block series, DIN rail terminal block series, wall-through terminal block series, and optocoupler terminal blocks. The pluggable type consists of two parts connected by plugging: one part clamps the wire and then plugs into the other part, which is soldered onto the PCB board. Based on this bottom mechanical principle, the anti-vibration design ensures long-term airtight connection and product reliability. Assembly ears can be added to both ends of the socket; these ears largely protect the contacts and prevent poor contact alignment, while this socket design ensures the socket can be correctly inserted into the housing. The socket can also have assembly clips and locking clips. Assembly clips provide more secure fixation to the PCB board, and locking clips can lock the housing and socket after installation. Various socket designs can match different insertion methods for the housing, such as horizontal, vertical, or angled orientation to the printed circuit board, allowing selection based on customer requirements. Both metric and standard wire gauges can be selected, making it the best-selling terminal type on the market. Barrier-type terminals achieve safe, reliable, and effective connections, and are widely used in high-current and high-voltage environments. Spring-type terminals are new terminal blocks using spring devices, widely applied in the global electrical and electronic engineering industries: lighting, elevator control, instruments, power supplies, chemical, and automotive power. DIN rail mounting adopts reliable screw connection technology, electronic fuse technology, and the latest electrical connection technology, widely used in power electronics, communications, electrical control, and power supply fields. DIN rail types use wire clamping and unique self-locking screw designs, making wiring connections reliable and safe. This series of terminal blocks features an attractive appearance and can be equipped with various accessories, such as short-circuit bridges, marker strips, and partitions. Wall-through types use screw connection technology, with insulation material made of PA66 (flammability rating: UL94, V-0), and connectors made of high-quality highly conductive metal materials.

AXIOMATIC plug features

1) Physical characteristics: Physical characteristics, also known as mechanical characteristics, refer to properties exhibited by components on the bus during physical connection, such as the geometric dimensions, shape, number of pins, and pin arrangement of plugs and sockets. 2) Functional characteristics: Functional characteristics refer to the function of each signal line. For example, the address bus is used to represent address codes. The data bus is used to represent transmitted data, and the control bus represents commands, states, etc., for operations on the bus. 3) Electrical characteristics: Electrical characteristics refer to the signal direction on each signal line and the voltage level range representing valid signals. Typically, signals sent by the master device (such as CPU) are called output signals (OUT), and signals sent to the master device are called input signals (IN). Typically, data signals and address signals define high level as logic 1 and low level as logic 0. There is no customary convention for control signals; for example, WE indicates active low, and Ready indicates active high. There is no unified regulation for the high and low voltage level ranges of different buses; they usually comply with TTL. 4) Timing characteristics: Timing characteristics, also known as logical characteristics, refer to when signals on each signal line are valid during bus operations. Through these timing relationships for valid signals, correct bus operation is ensured. To improve computer scalability and the universality of components and devices, in addition to internal chip buses, various components or devices adopt standardized forms to connect to the bus and implement information transmission on the bus in a standardized manner. These standardized connection forms and operation methods of the bus are collectively referred to as bus standards. Examples include ISA, PCI, and USB bus standards. Correspondingly, buses adopting these standards are ISA bus, PCI bus, and USB bus.

AXIOMATIC plug data exchange methods

Data Bus (DataBus). It specifies methods for data sharing and exchange in homogeneous and heterogeneous systems within a large integrated application system, serving as a standard for data exchange between systems. It can be used to transmit information between microprocessors and memory, and between microprocessors and input/output interfaces. The width of the data bus is an important indicator determining computer performance. Most microcomputer data buses are 32-bit or 64-bit. 1) Business entity data exchange: Each subsystem has a business entity layer in its architectural stratification. The data exchange mechanism establishes a layer transparent to all application systems at the business entity layer. Between subsystems, regardless of the specific technical implementation, sharing and interaction can occur through the business entity layer. This establishes a structure for continuous integration and business expansion between subsystems, thereby realizing a scalable, complete, integrated information system. 2) WebService data exchange: This is a Web service standard. Web services provide solutions for sharing and exchanging data between heterogeneous systems and can also be used for data sharing and exchange using unified interface standards in product integration.

Weidou Intelligent Technology specializes in selling German AXIOMATIC connectors, AXIOMATIC connectors, AXIOMATIC interface modules, AXIOMATIC terminal blocks, AXIOMATIC bus interfaces, AXIOMATIC bus modules, AXIOMATIC communication modules, AXIOMATIC fieldbus, AXIOMATIC plug interfaces, AXIOMATIC communication interfaces, AXIOMATIC adapters, AXIOMATIC output modules, AXIOMATIC distributor converters, AXIOMATIC plug buses, AXIOMATIC expansion modules, AXIOMATIC original German imports. Welcome customers to inquire and order.