German ZEUS tools, ZEUS models, ZEUS prices

ZEUS tools are material handling equipment for lifting or jacking heavy loads, operating intermittently to raise weights. Most lifting tools begin a vertical or combined vertical and horizontal working stroke after the rigging picks up the load, unload at the destination, then return empty to the pickup point to complete one work cycle before performing the second lift. Generally, during operation, picking up, moving, and unloading are carried out sequentially, and the work of each corresponding mechanism is intermittent. Lifting tools are mainly used to handle piece goods; when equipped with grabs, they can handle bulk materials such as coal, ore, and grain; when equipped with ladles, they can lift liquid materials such as molten steel. Some lifting tools, such as elevators, can also be used to carry people. In certain application scenarios, lifting equipment is the primary working tool; for example, cranes loading and unloading materials at ports and stations are the primary working tools.

ZEUS tool applications and usage

The electric hydraulic oil pump can serve as the hydraulic pump for various hydraulic devices. When paired with other hydraulic tools, the electric hydraulic oil pump can perform multiple tasks such as lifting, pressing, pipe bending, bar bending, straightening, shearing, assembly, and disassembly, reducing labor intensity and improving work efficiency. During use, open the air release nut, open the switch on the oil collection block, connect the power supply, and attach the quick connector to the quick coupling on the corresponding hydraulic device. Press the power switch; after the motor runs for 1-2 minutes, close the switch to set it to the pressure-boosting state. At this time, the output hydraulic oil will perform various tasks, with the output hydraulic oil self-pressurizing as the load increases until 63MPA. After work is completed, open the switch to relieve pressure. Once the hydraulic oil has returned, remove the quick connector, tighten the air release nut, unplug the power cord, and close the switch.

ZEUS tool structure and composition

The cross-sectional shape and distribution of the magnetic poles vary depending on the workpiece. Common structural types of electromagnetic chucks include rectangular and circular configurations. Rectangular magnetic poles are arranged either longitudinally or transversely. Longitudinal arrangement of rectangular magnetic poles is suitable for securing larger workpieces, while transverse arrangement is suitable for securing smaller workpieces. Circular chucks are suitable for securing ring-shaped workpieces or workpieces with complex geometries. The main characteristics of standard electromagnetic chucks are: magnetic flux lines are evenly distributed across the chuck surface, magnetic attraction cannot be concentrated, and the magnetic force per unit area is relatively low; the direction of the magnetic force is perpendicular to the chuck surface and difficult to change, generating only one type of magnetic force for workpieces with the same contact area; the point of application of the magnetic force is limited to the contact surface between the workpiece and the chuck and cannot be arbitrarily adjusted. Therefore, disadvantages during machining include low positioning accuracy, low clamping force, narrow scope of application, and low production efficiency.

ZEUS tool usage

1) Non-sparking tools provide safety assurance for personnel working in flammable, explosive, and corrosive environments, enhancing social safety and allowing workers to operate with greater peace of mind. After daily use, non-sparking tools require proper maintenance, which is critical to their service life; improper maintenance may prevent the tools from serving us for a long time. First, store the tools in a dry place to prevent damage to working components. In daily work, after continuous striking 20 times, treat surface attachments on the tools, wipe them clean before reuse, and avoid continuous use to prevent overheating due to prolonged friction, which could damage the tool products. 2) After use, wipe off surface dirt and deposits, and store in a dry, safe place. 3) For striking tools, do not strike continuously; allow appropriate intervals after ten strikes, and promptly remove adhering debris from the product parts before continuing use. 4) Do not exceed the rated torque when using wrenches; do not use sleeves or bind other metal rods to extend the lever arm, nor use hammering (except for hammering wrenches) to tighten fasteners. 5) Cutting-edge tools should be gently touched to the grinding wheel in a water trough for sharpening; do not apply excessive force or prolong contact with the grinding wheel. 6) During actual operation of chiseling and striking tools, clear site debris and corrosive oxides from the working surface to prevent third-party impact. Based on the above performance and usage, aluminum-bronze alloys are more suitable for normal pressure equipment and environments with less stringent explosion-proof requirements (such as gas stations and small oil depots), while beryllium-copper alloy non-sparking tools are suitable for applications such as refineries, gas transfer stations, gas extraction plants, and drilling teams. 7) Before using various products, remove surface oil stains and use according to the instructions for steel tools.

Weidou Intelligent Technology professionally sells German ZEUS workholding fixtures, ZEUS hydraulic tools, ZEUS power tools, ZEUS pneumatic tools, ZEUS hand tools, ZEUS electronic tools, ZEUS welding tools, ZEUS piping tools, ZEUS non-sparking tools, ZEUS electrical tools, ZEUS automotive maintenance tools, ZEUS fastening tools, ZEUS cutting tools, ZEUS striking tools, ZEUS grinding tools, all original imports from Germany. Customers are welcome to inquire and order.