German wf-messtechnik tools wf-messtechnik models wf-messtechnik prices

wf-messtechnik tools are any tools connected to the edge (joint) of a robot with specific functions. This may include robot grippers, robot tool changers, robot collision sensors, robot rotary connectors, robot pressure tools, compliance devices, robot spray guns, robot deburring tools, robot arc welding torches, robot electric welding torches, etc. Robot end-effectors are generally considered peripheral equipment of the robot, robot accessories, robot tools, or arm-end tools (EOA). Mechanical gripping end-effectors used in loading and unloading industrial robots are mostly two-finger claw types. Classified by finger motion, they can be divided into translational and rotational types. Classified by mechanical gripping method, they can be divided into external clamping and internal expanding types. Classified by mechanical structural characteristics, they can be divided into electric (electromagnetic), hydraulic, and pneumatic types, as well as their combinations.

wf-messtechnik tool applications and usage

The electric hydraulic pump can serve as the hydraulic pump for various hydraulic instruments. When equipped with other hydraulic tools, the electric hydraulic pump can perform tasks such as lifting, pressing, pipe bending, bar bending, straightening, shearing, assembly, and disassembly. It reduces labor intensity and improves work efficiency. During use, open the air release nut, open the switch on the oil collection block, connect the power supply, and attach the quick connector to the quick plug on the corresponding hydraulic instrument. Press the power switch; after the motor runs for 1-2 minutes, close the switch to set it to the pressure-boosting state. At this point, the output hydraulic oil will perform various tasks, self-pressurizing as the load increases until 63MPA. After work is completed, open the switch to relieve pressure. Once the hydraulic oil has returned, remove the quick connector, tighten the air release nut, unplug the power cord, and close the switch.

wf-messtechnik tool usage

1) Select an appropriate saw blade according to the workpiece. For example, use 14 teeth per inch for cutting solid or thick soft metals; use 18 teeth per inch for tool steel, iron pipes, and hard metals; and use 24 teeth per inch for cutting metal sheets, metal pipes, and thin iron bars. 2) Push the saw forward, and lift it gently when pulling back. 3) Select a wrench of appropriate size according to the nature of the work. 4) When using an adjustable wrench, apply force to the fixed jaw, never to the movable jaw. 5) If the wrench opening is worn or slips during use, do not continue using it to avoid slipping. 6) Do not use a wrench as a hammer for striking. 5) Do not slip a pipe over the handle end of a wrench to increase torque. 7) Press the inner side of the first leg of the square against the edge of the wooden board, and draw along the inner side of the second leg with a pencil to mark a perpendicular line. 8) Select an appropriate screwdriver according to the size and shape of the screw head slot. 9) Do not strike the screwdriver handle with a hammer; replace handles that are damaged immediately. 10) Do not use a screwdriver as a chisel or lever. 11) Use an electrician's screwdriver to test current; do not use ordinary screwdrivers to test high voltage. 12) Do not grind the tip of the screwdriver to avoid damaging the hardened surface. 13) Do not place screwdrivers in shirt or trouser pockets to avoid injury from collisions or falls.

wf-messtechnik tool maintenance

1) Tooth setting: The set is adjusted using a tooth setter. When setting the teeth, engage the slot of the setter with the saw teeth and apply force to bend them left or right; the degree of set must meet the requirements for the kerf width. 2) Filing: When filing the saw teeth, clamp the saw blade in a vise so that the teeth are exposed. Depending on the size of the teeth, use a triangular steel file 100 to 200 mm in length to file each tooth sequentially from right to left. Apply uniform pressure with both hands; keep one face of the file vertically flush against the lower cutting edge of the tooth, while the other face rests against the upper edge of the adjacent tooth. If the tooth set is found to be irregular, place the saw blade flat on a steel plate and use a wooden mallet to flatten all the teeth, then perform resetting and refiling. Additionally, maintain the saw frame; if damage is found in the ropes, nuts, knobs, or mortise-and-tenon joints, adjust or repair them promptly.

Weidou Intelligent Technology professionally sells German wf-messtechnik workholding fixtures, wf-messtechnik hydraulic tools, wf-messtechnik power tools, wf-messtechnik pneumatic tools, wf-messtechnik hand tools, wf-messtechnik electronic tools, wf-messtechnik welding tools, wf-messtechnik piping tools, wf-messtechnik explosion-proof tools, wf-messtechnik electrical tools, wf-messtechnik automotive maintenance tools, wf-messtechnik fastening tools, wf-messtechnik cutting tools, wf-messtechnik striking tools, wf-messtechnik grinding tools, wf-messtechnik original imports from Germany. Welcome inquiries and orders from customers.