German UNIDIAMANT tools UNIDIAMANT models UNIDIAMANT prices

UNIDIAMANT tools are made of copper alloy. Due to the good thermal conductivity of copper and its characteristic of being almost carbon-free, the heat generated in a short time when the tool rubs against or impacts an object is absorbed and conducted. Another reason is that copper itself is relatively soft, providing good compliance during friction and impact, making it difficult to produce tiny metal particles, so we hardly see any sparks. Therefore, explosion-proof tools are also called non-sparking tools. The materials for explosion-proof tools are beryllium bronze and aluminum bronze. Beryllium bronze alloys and aluminum bronze alloys do not spark upon impact or friction, making them very suitable for manufacturing safety tools used in explosive, flammable, strong magnetic, and corrosive environments. BeA-20C alloy withstands an impact energy of 561IJ in hydrogen containing 30% or in methane-air-oxygen mixtures containing 6.5-10%, without sparking or igniting after 20 impacts.

UNIDIAMANT tool classification

1) Electric planer: It is one of the main tools used in woodworking and decoration. It is mainly used for planing flat and straight surfaces of various woods. Products are divided into short planers and rough planers. Rough planers are mainly used for planing flat wood surfaces and can process larger board surfaces; short planers, in addition to planing board surfaces, can also be used with various guide plates for planing tongues and grooves, edges, and slotting. The main features of using a handheld electric planer are small size, light weight, portability, and ease of use. Compared with manual tools, it can greatly reduce labor intensity and improve processing efficiency and quality. When using a handheld electric planer, hold the handle at the rear of the planer body with your right hand and slightly raise the center of gravity of the rear part. After starting the power with your left hand, hold the guide handle at the front of the planer, keeping the center of gravity of the front part lower. Follow the operation sequence where the front part of the planer contacts the wood first. When the rear part of the planer steadily contacts the planing surface of the wood, push the planer body forward smoothly in the direction of planing with both hands. After the planer body completes the planing stroke, lift the front part of the planer with your left hand, then pick it up with both hands and return to the starting point for the next pass. Repeat this until all planing is completed. 2) Jigsaw: Also known as electric coping saw, electric fine saw, etc. It is a multifunctional cutting tool that can cut wooden boards, as well as perform straight or curved cuts on plastic and metal sheets. It is particularly effective for cutting complex shapes and geometric figures with small radii of curvature. It is an essential multifunctional sawing tool for home renovation and various public interior decoration projects. It features light weight, small size, portability, simple operation, and wide application range. Its cutting principle involves a narrow saw blade with upward-facing teeth. During operation, the blade moves in a linear reciprocating motion up and down to cut, completing various sawing tasks according to size requirements. If used with a guide plate, it can also perform angled bevel processing. When using an electric jigsaw, for smaller and thinner wooden boards, fix them on a workbench first and support the workpiece with your left hand. Then, hold the saw handle with your right hand and push forward slowly for sawing. Apply steady and uniform force during operation; do not use excessive force to avoid injury or damage to the blade. For larger boards, ensure the board is fixed steadily, then hold the saw handle with both hands and push forward for sawing. Operate along the marked line and always keep the blade perpendicular to the board surface to prevent jamming or binding. 3) Circular saw: Also known as a small handheld circular saw. It is a new type of small handheld electric saw equipped with a spring-loaded automatic safety guard and an electronically controlled constant-speed motor. It features simple operation, flexible use, quick adjustment, and safe reliability. It is very suitable for home renovation tasks such as cutting various wooden boards and artificial fiberboards. The thickness of wood or boards to be cut is generally recommended to be below 60mm. 4) Sanding tools: Also known as small handheld grinders. They are mainly used for sanding bare wood before painting various wood veneers, and can also be used for sanding putty surfaces. However, sanding putty generates significant dust, which seriously pollutes the environment, so enhanced labor protection is required during operation. Handheld grinders include belt sanders and orbital sanders. Belt sanders are mainly used for rapid sanding of wooden components and products, while orbital sanders are commonly used for sanding large areas such as wooden floors in home renovations. 5) Small engraving machine: Also known as a groove planner or trimmer. It can be used for slotting, tenoning, drilling, edging, milling, and trimming on various wooden products and components. It can also be used for simple edging, milling, grooving, and trimming on light metal materials such as aluminum alloy and plastic steel, such as aluminum alloy (or plastic steel) doors and windows, balcony frames, and furniture frames. Therefore, it is also one of the commonly used power tools in modern home renovation projects.

UNIDIAMANT tool usage

1) Rip cutting method: When sawing, place the wood on a bench. Step on the wood with your right foot, positioning it at a right angle to the sawing line. Stand straight with your left foot at an angle of 60° to the sawing line. Keep your right hand perpendicular to your right knee. Your body should be at an angle of approximately 45° to the sawing line. Lean your upper body forward slightly and remain agile, but do not lean excessively to the left or lunge to the right. When sawing, hold the saw with your right hand and place your left thumb against the blade for positioning. Gently pull and push the saw a few times with your right hand (pull first, then push) to create a kerf. Then remove your left hand from the saw edge. When the teeth have cut into the wood to a depth of about 5mm, use your left hand to assist your right hand in lifting and pushing the frame saw. Lift the saw lightly, raising the sawing hand slightly. Push the saw with more force, applying simultaneous effort from your wrist, elbow, shoulder, and waist in a rhythmic manner. This ensures the saw blade advances along the sawing line. Otherwise, the edge of the wood after rip cutting will be bent and uneven, or the cross-section of the kerf will be inconsistent. 2) Cross-cutting method: When sawing, place the wood on a bench. Stand at the back left of the wood. Hold the wood with your left hand and the saw with your right hand. Step on the wood with your left foot. The sawing method is the same as for rip cutting. When using a frame saw for cross-cutting, the lower end of the blade should tilt forward. For rip sawing, the upper end of the blade tilts backward at an angle of approximately 75° to 90° (angle with the wood surface). For cross-cutting, the blade tilts backward at an angle of approximately 30° to 45°. Always ensure the saw blade advances along the line without deviation. The kerf must be straight; do not allow the blade to sway left or right, causing skew. When the wood is about to be severed, stabilize the cutoff piece with your left hand and slow down the sawing speed. Saw completely through the wood; do not leave any material to break off naturally or snap it by hand, as this can easily damage the saw blade and cause the wood to split along the grain, affecting quality.

UNIDIAMANT tool types and features

Hydraulic tools include: hydraulic wrenches, dedicated electric pumps for hydraulic wrenches, hydraulic jacks, hydraulic bolt tensioners, hydraulic flange spreaders, hydraulic nut splitters, hydraulic pullers, etc. Hydraulic tools offer the advantages of high efficiency and convenience. 1) Generally use mineral oil as the working medium. The relative moving surfaces can self-lubricate, resulting in a long service life. 2) Light weight, small size, low motion inertia, and fast response speed. 3) Various components of hydraulic transmission can be arranged conveniently and flexibly according to needs. 4) Automatic overload protection can be achieved. 5) Convenient operation and control, enabling stepless speed regulation over a wide range (speed regulation ratio up to 2000:1). 6) Linear motion is easily achieved. 7) Machine automation is easily achieved. When adopting electro-hydraulic combined control, not only can a higher degree of automatic control be realized, but remote control is also possible.

Weidou Intelligent Technology specializes in selling German UNIDIAMANT workholding fixtures, UNIDIAMANT hydraulic tools, UNIDIAMANT power tools, UNIDIAMANT pneumatic tools, UNIDIAMANT hand tools, UNIDIAMANT electronic tools, UNIDIAMANT welding tools, UNIDIAMANT pipe tools, UNIDIAMANT explosion-proof tools, UNIDIAMANT electrical tools, UNIDIAMANT automotive maintenance tools, UNIDIAMANT fastening tools, UNIDIAMANT cutting tools, UNIDIAMANT striking tools, UNIDIAMANT grinding tools. All products are original imports from Germany. Welcome customers to inquire and order.