German TYROLIT tools TYROLIT models TYROLIT prices

TYROLIT tools refer to electrical safety tools and equipment, which are various specialized tools and devices designed to prevent accidents such as electric shock, burns, falls, and stumbling, thereby ensuring the personal safety of workers. In power systems, operators must carry and use various safety tools to complete tasks smoothly without causing personal injury. For example, electrical safety tools are required when inspecting operating electrical equipment, changing operating modes, or performing maintenance and tests; climbing safety tools are needed during line construction; when working on live electrical equipment or in areas near live equipment, insulated safety tools must be used to prevent electric shock or arc burns. Electrical safety tools can be divided into four categories: personal protective equipment, insulated safety tools, climbing tools, and warning signs.

TYROLIT tool applications and usage

The electric hydraulic oil pump can serve as the hydraulic pump for various hydraulic tools. When equipped with other hydraulic tools, the electric hydraulic oil pump can perform multiple tasks such as lifting, pressing, pipe bending, busbar bending, straightening, shearing, assembly, and disassembly. It reduces labor intensity and improves work efficiency. During use, open the air release nut, open the valve on the oil collection block, connect the power supply, and attach the quick coupler to the quick plug of the corresponding hydraulic tool. Press the power switch, wait for the motor to run for 1-2 minutes, then close the switch to the pressure-boosting state. At this point, the output hydraulic oil will perform various tasks, automatically increasing pressure with the load until 63MPA. After work is completed, open the valve to relieve pressure. Once the hydraulic oil has returned, remove the quick coupler, tighten the air release nut, unplug the power cord, and close the switch.

TYROLIT tool structure and composition

The function of the power component is to convert the mechanical energy of the prime mover into the pressure energy of the fluid. This refers to the oil pump in the hydraulic system, which provides power to the entire hydraulic system. The structural forms of hydraulic pumps generally include gear pumps, vane pumps, and piston pumps. The function of actuating components (such as hydraulic cylinders and hydraulic motors) is to convert the pressure energy of the fluid into mechanical energy, driving loads to perform linear reciprocating motion or rotary motion. Control components (i.e., various hydraulic valves) control and regulate the pressure, flow, and direction of the fluid in the hydraulic system. Depending on the control function, hydraulic valves can be divided into pressure control valves, flow control valves, and directional control valves. Pressure control valves are further divided into relief valves (safety valves), reducing valves, sequence valves, pressure relays, etc.; flow control valves include throttle valves, adjustment valves, flow divider-combiner valves, etc.; directional control valves include check valves, pilot-operated check valves, shuttle valves, directional valves, etc. Depending on the control method, hydraulic valves can be divided into on/off control valves, fixed-value control valves, and proportional control valves. Auxiliary components include oil tanks, oil filters, oil pipes and pipe fittings, sealing rings, pressure gauges, oil level and oil temperature gauges, etc. Hydraulic oil is the working medium that transmits energy in the hydraulic system, including various mineral oils, emulsions, and synthetic hydraulic oils.

TYROLIT tool operation

1) The single-phase power cord for mobile electric machinery and handheld power tools must use a three-core soft rubber cable, and the three-phase power cord must use a four-core rubber cable; during wiring, the cable sheath should pass into the equipment's junction box and be secured. 2) Before using power tools, check the following items: the housing and handle should have no cracks or damage, the protective grounding wire or neutral wire connection should be correct and secure, the cable or flexible cord should be intact, the plug should be intact, the switch should operate normally, flexibly, and without damage, the electrical protection device should be intact, the mechanical guard should be intact, and the rotating parts should move freely. 3) The insulation resistance of power tools should be measured regularly using a megohmmeter of 500V; if the insulation resistance between the live parts and the housing is less than 2M Ω, maintenance must be performed. 4) After repairing the electrical parts of power tools, insulation resistance measurement and dielectric strength testing must be conducted. The test voltage is 380V, and the test duration is 1 minutes. 5) The electrical circuits connecting electric machinery and tools should have separate switches or sockets, and residual current operated protective devices should be installed; the metal housing must be grounded; it is strictly prohibited to connect multiple devices to a single switch. 6) The rated residual operating current of current-type residual current operated protective devices must not exceed 30mA, and the operating time must not exceed 0.1 seconds; the rated residual operating voltage of voltage-type residual current operated protective devices must not exceed 36V. 7) The operating switch of electric tools should be located within easy reach of the operator. When resting, leaving work, or in case of sudden power outage during work, the power side switch should be turned off. 8) When using portable or mobile power tools, wear insulating gloves or stand on an insulating mat; when moving the tool, do not lift it by the power cord or the rotating parts. 9) When using Class III insulated power tools in damp or acid-containing environments, or inside metal containers, reliable insulation measures must be taken, and a dedicated supervisor must be assigned. The power tool switch should be located within easy reach of the supervisor. 10) The magnetic surface of a magnetic base drill should be flat, clean, and rust-free. When performing side drilling or overhead drilling, measures should be taken to prevent the drill body from falling in case of power loss. 11) When using an electric wrench, ensure the reaction torque support is firmly positioned and the nut is securely tightened before starting.

Weidou Intelligent Technology specializes in selling German TYROLIT workpiece clamps, TYROLIT hydraulic tools, TYROLIT power tools, TYROLIT pneumatic tools, TYROLIT hand tools, TYROLIT electronic tools, TYROLIT welding tools, TYROLIT piping tools, TYROLIT explosion-proof tools, TYROLIT electrical power tools, TYROLIT automotive maintenance tools, TYROLIT fastening tools, TYROLIT cutting tools, TYROLIT striking tools, TYROLIT grinding tools, TYROLIT original German imports. Welcome customers to inquire and order.