German Trimatec tools Trimatec models Trimatec prices

Trimatec tools utilize electromagnetic technologies such as permanent magnets to assist in mechanical manufacturing processes. They can be categorized into magnetic fixtures, magnetic tools, magnetic molds, and magnetic auxiliary equipment. The use of magnetic tools can significantly improve production efficiency and reduce the physical workload of employees. For some workpieces, clamping is inconvenient during machining and assembly due to their structural characteristics. Simply position the U-shaped iron core vertically on the worktable for processing; by embedding a magnet in the positioning block of the fixture, the workpiece can be firmly adsorbed onto the worktable equipped with the positioning block and accurately positioned. This greatly simplifies the fixture structure and improves work efficiency. Some products require welding small parts onto the workpiece; if accurate positioning is not achieved, it not only makes the work inconvenient but also fails to meet requirements.

Trimatec tool types

1) Frame saw. Also known as a rack saw, it consists of an I-shaped wooden frame, twisted rope, twist pieces, and a saw blade. Both ends of the saw blade are fixed to the frame with knobs, which can also be used to adjust the angle of the blade. After tightening the twisted rope, the saw blade is tensioned and ready for use. Frame saws are classified into coarse, medium, and fine types based on blade length and tooth pitch. Coarse saw blades are 650—750mm long, with a tooth pitch of 4—5mm; coarse saws are mainly used for cutting thicker wood. Medium saw blades are 550—650mm long, with a tooth pitch of 3—4mm; medium saws are mainly used for cutting thin wood or cutting tenons. Fine saw blades are 450—500mm long, with a tooth pitch of 2—3mm; fine saws are mainly used for cutting finer wood and cutting tenon shoulders. 2) Knife saw. A knife saw mainly consists of a saw edge and a handle, and can be divided into single-sided, double-sided, and backed knife saws. Single-sided knife saws have a blade length of 350mm, with teeth on one side; depending on the function of the teeth, they can be divided into rip cuts and cross cuts. Double-sided knife saws have a blade length of 300mm, with teeth on both sides; typically, one side is for rip cutting and the other for cross cutting. Backed knife saws have a blade plate length of 250—300mm; the back of the backed knife saw is reinforced with a steel strip, featuring finer teeth, and is available in rip and cross cut versions. 3) Groove saw. A groove saw consists of a handle and a saw blade, with the blade being approximately 200mm long. Groove saws are mainly used for cutting grooves in wood. 4) Panel saw. Also known as a hand saw, it consists of a handle and a saw blade, with the blade being approximately 250—750mm long and a tooth pitch of 3—4mm. Panel saws are mainly used for cutting wider wooden boards. 5) Narrow hand saw. The saw blade is narrow and long, with a pointed front end, and a length of approximately 300—400mm. Narrow hand saws are mainly used for cutting narrow holes and slots. 6) Coping saw. Also known as a bow saw, its construction is similar to that of a frame saw, but the blade is narrower (approximately 10mm), mainly used for cutting arcs, curves, and other shapes. 7) Wire saw. Also known as a bow saw, it is made by bending a bamboo strip into a bow shape and stretching a steel wire between the two ends. Saw-tooth-like flying edges are chopped onto the steel wire, using the sharp edges of these flying edges for cutting. The steel wire is approximately 200—600mm long, and the saw bow is 800—900mm long. Wire saws are mainly used for cutting complex curves and opening holes.

Trimatec tool usage

1) Select the appropriate saw blade for the workpiece. For example, use 14 teeth per inch for cutting solid or thick soft metals; use 18 teeth per inch for tool steel, iron pipes, and hard metals; and 24 teeth per inch are suitable for cutting metal sheets, metal pipes, and thin iron bars. 2) Push forward to cut, and gently lift when pulling back. 3) Select wrenches of appropriate size according to the nature of the work. 4) When using an adjustable wrench, apply force towards the fixed jaw, never towards the movable jaw. 5) If the wrench jaws are worn or slip during use, do not continue to use them to prevent slipping. 6) Do not use a wrench as a hammer for striking. 5) Do not place a pipe over the handle end of a wrench to increase torque. 7) Press the inner side of the first leg of the square against the edge of the wooden board, and draw along the inner side of the second leg with a pencil to mark a perpendicular line. 8) Select the appropriate screwdriver according to the size and shape of the screw head slot. 9) Do not strike the screwdriver handle with a hammer; replace handles immediately if damaged. 10) Do not use a screwdriver as a chisel or lever. 11) Use an electrician's screwdriver to test current; do not use ordinary screwdrivers to test high voltage. 12) Do not grind the tip of a screwdriver to avoid damaging the hardened surface. 13) Do not keep screwdrivers in shirt or trouser pockets to avoid injury from collision or falling.

Trimatec tool types and features

Hydraulic tools include: hydraulic wrenches, special electric pumps for hydraulic wrenches, hydraulic jacks, hydraulic bolt tensioners, hydraulic flange spreaders, hydraulic nut splitters, hydraulic pullers, etc. Hydraulic tools offer the advantages of high efficiency and convenience. 1) Generally use mineral oil as the working medium; relative moving surfaces can self-lubricate, resulting in a long service life. 2) Light weight, small volume, low motion inertia, and fast response speed. 3) Various components of hydraulic transmission can be conveniently and flexibly arranged as needed. 4) Automatic overload protection can be realized. 5) Convenient operation and control, enabling wide-range stepless speed regulation (speed regulation range up to 2000:1). 6) Linear motion is easily achieved. 7) Machine automation is easily realized; when adopting electro-hydraulic combined control, not only a higher degree of automatic control process can be achieved, but remote control is also possible.

Weidou Intelligent Technology specializes in selling German Trimatec workpiece fixtures, Trimatec hydraulic tools, Trimatec power tools, Trimatec pneumatic tools, Trimatec hand tools, Trimatec electronic tools, Trimatec welding tools, Trimatec piping tools, Trimatec explosion-proof tools, Trimatec electrical power tools, Trimatec automotive maintenance tools, Trimatec fastening tools, Trimatec cutting tools, Trimatec striking tools, Trimatec grinding tools, all original imports from Germany. Welcome customers to inquire and order.