German TENAX tools TENAX models TENAX prices

TENAX tools refer to implements used in woodworking. They generally have sharp cutting edges, so safety must be prioritized during use. Frequent sharpening is required, especially for planer blades and chisels; keeping them sharp ensures ease of use and quality workmanship, as implied by the saying "sharpening the axe does not delay the woodcutting." Woodworking tools are categorized into power tools, pneumatic tools, and hand tools. Power tools are divided by function into multi-function tools (such as multi-purpose oscillating tools) and single-function tools (such as electric planers, jigsaws, circular saws, sanders, and engravers); pneumatic tools include polishers and nail guns; hand tools are divided into measuring tools, hand saws, woodworking planes, wood files, hand chisels, and sandpaper.

TENAX tool classification

1) Screwdriver: A tool used to turn screws to position them, typically featuring a thin wedge-shaped tip that inserts into the slot or recess of the screw head—also known as a "screwdriver bit" or "turnscrew." 2) Wrench: A manual tool with an open end or box end that uses leverage to turn bolts, screws, nuts, and other threaded fasteners. Wrenches typically have jaws at one or both ends of the handle to apply external force; applying force along the direction of thread rotation allows tightening or loosening of bolts or nuts. 3) Hammer: A tool used to strike objects to move or deform them. It is most commonly used to drive nails, correct shapes, or separate objects. Hammers come in various forms; a common design consists of a handle and a head. One face of the head is flat for striking, while the other may be shaped like a claw or wedge for pulling nails, or rounded. 4) Test pen: Also called a voltage tester or simply "electric pen," this is an electrical tool used to test whether wires are live. The body contains a neon bulb; if the bulb lights up during testing, it indicates the wire is live or is the phase conductor. The tip and tail of the test pen are made of metal, while the shaft is made of insulating material. When using a test pen, you must touch the metal part at the tail with your hand; otherwise, no circuit is formed between the live object, the test pen, the human body, and the ground, causing the neon bulb not to light up and leading to misjudgment that the object is not live. 5) Tape measure: A common measuring tool in daily life. Steel tape measures are frequently seen, widely used in construction and decoration, and are essential household tools. Types include fiber tape measures, cloth tapes, and waist tapes. Luban rulers, Feng Shui rulers, and Wen Gong rulers also belong to the category of steel tape measures. 6) Utility knife: A type of knife with a sharp blade used for cutting wallpaper and similar materials, hence the name "wallpaper knife," also known as a "craft knife." It is frequently used in renovation, decoration, and signboard industries. 7) Electrician's knife: A cutting tool commonly used by electricians. Standard electrician's knives consist of a blade, cutting edge, handle, and clip. When not in use, the blade retracts into the handle. The blade root is hinged to the handle, featuring scale lines and markings; the front end forms a screwdriver tip, both sides have file surfaces, the cutting edge has an inwardly curved blade section ending in a point, and the handle has a protection button to prevent blade rebound. The electrician's knife blade integrates multiple functions, allowing various wire connection operations with just one tool, eliminating the need to carry other tools, offering benefits such as simple structure, ease of use, and versatility. 8) Hacksaw: Includes hand saws (for household and woodworking use), pruning saws (for branch trimming), folding saws (for branch trimming), bow saws, coping saws (woodworking), rip saws (woodworking), and crosscut saws (woodworking). 9) Spirit level: A spirit level contains a bubble vial and can be used to inspect, measure, and debug whether equipment is installed horizontally. 10) Combination pliers: Combination pliers are clamping and cutting tools consisting of a head and handles. The head includes jaws, serrated grips, cutting edges, and wire cutters. The functions of the plier parts are: (1) The serrated grips can be used to tighten or loosen nuts; (2) The cutting edges can be used to strip rubber or plastic insulation from soft wires, and to cut wires and iron wires; (3) The wire cutters can be used to cut harder metal wires such as electrical wires and steel wires; (4) The insulating plastic sleeves on the pliers withstand voltages above 500V, allowing live wire cutting. 11) Needle-nose pliers: Also called long-nose pliers, primarily used to cut fine single-strand and multi-strand wires, bend loops for single-strand wire connectors, and strip plastic insulation. They are commonly used by electricians (especially interior wiring electricians). They consist of pointed tips, cutting edges, and handles. Electrician's needle-nose pliers have insulating sleeves rated for 500V on the handles. Due to their pointed heads, they are suitable for operations in narrow spaces. To bend wire connectors with needle-nose pliers: first fold the wire end to the left, then bend it clockwise to the right against the screw. 12) Wire strippers: Wire strippers are commonly used by interior wiring electricians, motor repair technicians, and instrumentation electricians. Their appearance is shown below. They consist of cutting edges, crimping jaws, and handles. The handles of wire strippers have insulating sleeves rated for 500V. Wire strippers are suitable for stripping insulation from plastic and rubber insulated wires and cable cores. Usage: Place the wire end to be stripped into the blade notch, squeeze the two handles together, then release; the insulation will separate from the core.

TENAX tool usage

1) Select the appropriate saw blade for the workpiece. For example, use 14 teeth per inch for cutting solid or thick soft metals; 18 teeth per inch for tool steel, iron pipes, and hard metals; and 24 teeth per inch for cutting metal sheets, metal pipes, and thin iron bars. 2) Push forward to saw, and lift gently when pulling back. 3) Choose a wrench of appropriate size according to the nature of the work. 4) When using an adjustable wrench, apply force towards the fixed jaw, never towards the adjustable jaw. 5) If the wrench opening is worn or slips during use, discontinue use immediately to prevent slipping. 6) Do not use a wrench as a hammer for striking. 5) Do not slip a pipe over the wrench handle to increase torque. 7) Press the inner side of the first leg of the square against the edge of the wooden board, and draw a vertical line with a pencil along the inner side of the second leg. 8) Select a screwdriver appropriate for the size and shape of the screw head slot. 9) Do not strike the screwdriver handle with a hammer; replace damaged handles immediately. 10) Do not use a screwdriver as a chisel or lever. 11) Use an electrician's screwdriver to test current; do not use ordinary screwdrivers to test high voltage. 12) Do not grind the screwdriver tip to avoid damaging the hardened surface. 13) Do not keep screwdrivers in shirt or trouser pockets to avoid injury from collision or falling.

TENAX tool types and features

Hydraulic tools include: hydraulic wrenches, dedicated electric pumps for hydraulic wrenches, hydraulic jacks, hydraulic bolt tensioners, hydraulic flange spreaders, hydraulic nut splitters, hydraulic pullers, etc. Hydraulic tools offer high efficiency and convenience. 1) Generally use mineral oil as the working medium; moving surfaces self-lubricate, resulting in long service life. 2) Lightweight, compact, low motion inertia, and fast response speed. 3) Various hydraulic transmission components can be arranged conveniently and flexibly as needed. 4) Automatic overload protection can be implemented. 5) Easy operation and control, enabling wide-range stepless speed regulation (speed regulation range up to 2000:1). 6) Linear motion is easily achieved. 7) Machine automation is easily realized; when electro-hydraulic combined control is adopted, not only a higher degree of automatic control can be achieved, but remote control is also possible.

Weidou Intelligent Technology specializes in selling German TENAX workholding fixtures, TENAX hydraulic tools, TENAX power tools, TENAX pneumatic tools, TENAX hand tools, TENAX electronic tools, TENAX welding tools, TENAX piping tools, TENAX explosion-proof tools, TENAX electrical power tools, TENAX automotive maintenance tools, TENAX fastening tools, TENAX cutting tools, TENAX striking tools, TENAX grinding tools, all original imports from Germany. We welcome inquiries and orders from customers.