German tecnomors tools tecnomors models tecnomors prices

tecnomors tools are tools that work by using compressed air to drive a pneumatic motor and output kinetic energy. According to their basic operating methods, they can be divided into: 1) rotary type (eccentric movable vane type). 2) reciprocating type (volume piston type). General pneumatic tools mainly consist of the power output part, operation form conversion part, intake and exhaust path part, operation start and stop control part, tool housing and other main parts. Of course, pneumatic tool operation must also have an energy supply part, air filtration and air pressure regulation part, as well as tool accessories. Main types include impact wrenches (also called pneumatic wrenches, air wrenches, air impact wrenches), pneumatic screwdrivers (also called pneumatic drivers, air screwdrivers), pneumatic grinders (also called pneumatic polishers, pneumatic wet grinders, pneumatic sanders, pneumatic grinding machines), pneumatic spray guns, pneumatic rivet guns, pneumatic nut setters, air chisels, air hammers, vibration-damping pneumatic saws, and vibration-damping pneumatic files.

tecnomors tool types

1) Frame saw. Also known as a buck saw, it is composed of an I-shaped wooden frame, twisted rope and twist pieces, saw blade, etc. The two ends of the saw blade are fixed to the frame with knobs, which can be used to adjust the angle of the saw blade. After the twisted rope is tightened, the saw blade is taut and ready for use. Frame saws can be divided into coarse, medium, and fine types according to the length of the saw blade and tooth pitch. Coarse saw blades are 650—750mm long, with a tooth pitch of 4—5mm. Coarse saws are mainly used for sawing thicker wood; medium saw blades are 550—650mm long, with a tooth pitch of 3—4mm. Medium saws are mainly used for sawing thin wood or cutting tenons; fine saw blades are 450—500mm long, with a tooth pitch of 2—3mm. Fine saws are mainly used for sawing finer wood and cutting tenon shoulders. 2) Knife saw. The knife saw mainly consists of two parts: the saw edge and the saw handle. It can be divided into single-sided, double-sided, back-backed knife saws, etc. Single-sided knife saws are 350mm long, with teeth on one side. Depending on the function of the teeth, they can be divided into rip cuts and cross cuts; double-sided knife saws are 300mm long, with teeth on both sides. The teeth on both sides are generally rip cuts on one side and cross cuts on the other. Back-backed knife saw plates are 250—300mm long. The back of the back-backed knife saw is straightened with steel strips, and the teeth are finer, divided into rip cuts and cross cuts. 3) Groove saw. The groove saw consists of a handle and a saw blade, with the saw blade being approximately 200mm long. Groove saws are mainly used for cutting grooves in wood. 4) Panel saw. Also known as a hand saw. It consists of a handle and a saw blade, with the saw blade being approximately 250—750mm long, and a tooth pitch of 3—4mm. Panel saws are mainly used for sawing wider wooden boards. 5) Narrow hand saw. The saw blade is narrow and long, with a pointed front end, approximately 300—400mm in length. Narrow hand saws are mainly used for sawing narrow holes and slots. 6) Jigsaw. Also known as a coping saw, its structure is the same as that of a frame saw, but the saw blade is narrower (about 10mm). It is mainly used for sawing arcs, curves, and other parts. 7) Wire saw. Also known as a bow saw, it is made by bending a bamboo strip into a bow shape, with steel wire stretched at both ends. Sawtooth-like flying edges are chopped onto the steel wire, using the sharp edges of the flying edges for sawing. The steel wire is approximately 200—600mm long, and the saw bow is 800—900mm long. Wire saws are mainly used for sawing complex curves and cutting holes.

tecnomors tool parameters

The most important performance parameters characterizing the basic working capacity of lifting tools are lifting capacity and working class. (1) Lifting capacity refers to the maximum weight of objects allowed to be lifted under specified working conditions, i.e., the rated lifting capacity. Generally, if equipped with a permanent magnet chuck (see permanent magnet lifter), its lifting capacity should also include the weight of the permanent magnet chuck. (2) Working class is a performance parameter reflecting the overall working status of lifting tools and is an important basis for designing and selecting lifting tools. It is determined by the total number of work cycles required to be completed during the required service period of the lifting tool and the load state. For lifting tools with strong regularity and high repeatability in operation procedures, such as electric hoists for loading and unloading ship cargo at docks, chain hoists for high-bay warehouses, and hopper lifts for supplying blast furnaces, the work cycle is also an important parameter. The work cycle refers to the time required to complete one work cycle, which depends on the working speed of the mechanism and is related to the handling distance. The above-mentioned lifting tools sometimes also use productivity as an important parameter, usually expressed in terms of the amount of lifting completed per hour. In current use, efficiency is the first priority, followed by appearance and quality.

tecnomors tool features

1) Lifting tools are generally compact in size and simple in mechanism, capable of performing both vertical lifting and horizontal movements. 2) The loads handled by lifting tools vary widely, with fluctuating load conditions. Some heavy objects weigh hundreds or even thousands of tons, while others may be dozens of meters long and have irregular shapes. These include bulk materials, molten substances, and hazardous items that are flammable or explosive, making the lifting process complex and dangerous. 3) Some lifting tools operate over large spatial ranges. Certain types require tracks and wheels (such as tower cranes and bridge cranes); others are equipped with tires or crawler tracks for ground mobility (such as truck-mounted cranes and crawler cranes); and some operate along steel wire ropes (such as passenger and freight aerial ropeways). Due to the extensive operating space, any accident can have a wide-ranging impact. 4) Some lifting tools directly transport personnel, performing vertical movements along guide rails, platforms, or steel wire ropes (such as elevators and lifting platforms), where their reliability directly affects personal safety. 5) Lifting tools have many exposed moving parts that often come into direct contact with lifting personnel (such as hooks and steel wire ropes), presenting numerous potential accidental hazards. 6) The operating environment is complex. Lifting tools are used in settings ranging from large integrated steel enterprises to modern ports, construction sites, railway hubs, and tourist attractions. Workplaces often encounter hazardous factors such as high temperatures, high pressure, flammable and explosive materials, power transmission lines, and strong magnetic fields, posing threats to both equipment and personnel. 7) Lifting operations often require coordination among multiple personnel. A single operation demands skilled cooperation, coordinated actions, and mutual awareness among staff responsible for command, rigging, and operation. Personnel must be capable of handling on-site emergencies. Achieving close coordination among multiple workers is often challenging. These operational characteristics of lifting tools establish a significant relationship with safe production. Any negligence in the design, manufacturing, installation, use, or maintenance of lifting tools can lead to casualties or equipment accidents, resulting in both personal injury and substantial economic losses.

Weidou Intelligent Technology specializes in selling German tecnomors workpiece clamps, tecnomors hydraulic tools, tecnomors power tools, tecnomors pneumatic tools, tecnomors manual tools, tecnomors electronic tools, tecnomors welding tools, tecnomors pipe tools, tecnomors explosion-proof tools, tecnomors electrical tools, tecnomors automotive maintenance tools, tecnomors fastening tools, tecnomors cutting tools, tecnomors striking tools, tecnomors grinding tools, tecnomors original German imports. Welcome customers to inquire and order.