German TECNODISC tools TECNODISC models TECNODISC prices

TECNODISC tools integrate hydraulic systems with conventional tools into a unified whole. They convert powerful hydraulic power into mechanical motions such as reciprocating linear motion, rotary motion, and cycloidal motion. A complete hydraulic tool system consists of five components: power elements, actuating elements, control elements, auxiliary elements, and hydraulic oil. Hydraulic tools include: hydraulic wrenches, electric pumps dedicated to hydraulic wrenches, hydraulic jacks, hydraulic bolt tensioners, hydraulic flange spreaders, hydraulic nut splitters, hydraulic pullers, etc. Hydraulic tools offer the advantages of high efficiency and convenience. A complete hydraulic tool system consists of five components: power elements, actuating elements, control elements, auxiliary elements, and hydraulic oil.

TECNODISC tool applications and usage

The electric hydraulic oil pump can serve as the hydraulic pump for various hydraulic devices. When paired with other hydraulic tools, the electric hydraulic oil pump enables tasks such as lifting, press forming, pipe bending, bar bending, straightening, shearing, assembly, and disassembly. It reduces labor intensity and improves work efficiency. During use, open the air release nut, open the valve on the oil collection block, connect the power supply, and attach the quick coupler to the quick plug on the corresponding hydraulic device. Press the power switch; after the motor runs for 1-2 minutes, close the switch to set it to the pressure-boosting state. At this point, the output hydraulic oil will perform various tasks, with pressure self-boosting as the load increases until reaching 63MPA. After work is completed, open the valve to relieve pressure. Once the hydraulic oil has returned to the reservoir, remove the quick coupler, tighten the air release nut, unplug the power cord, and close the valve.

TECNODISC tool usage

1) Select the appropriate saw blade for the workpiece; for example, use 14 teeth per inch for cutting solid or thick soft metals; use 18 teeth per inch for tool steel, iron pipes, and hard metals; and 24 teeth per inch are suitable for cutting metal sheets, metal pipes, and thin iron bars. 2) Push the saw forward, and lift it slightly when pulling back. 3) Select wrenches of appropriate size according to the nature of the work. 4) When using an adjustable wrench, apply force toward the fixed jaw, never toward the adjustable jaw. 5) If the wrench jaws are worn or slip during use, do not continue using them to prevent slipping. 6) Do not use a wrench as a hammer for striking. 5) Do not slide a pipe over the wrench handle to increase torque. 7) Press the inner side of the first leg of the square against the edge of the wooden board, and draw along the inner side of the second leg with a pencil to mark a perpendicular line. 8) Select the appropriate screwdriver based on the size and shape of the screw head slot. 9) Do not strike the screwdriver handle with a hammer; replace handles that are damaged immediately. 10) Do not use a screwdriver as a chisel or lever. 11) Use an electrician's screwdriver to test current; do not use ordinary screwdrivers to test high-voltage electricity. 12) Do not grind the screwdriver tip to avoid damaging the hardened surface. 13) Do not place screwdrivers in shirt or trouser pockets to prevent injury from collisions or falls.

TECNODISC tool precautions

1) Before use, inspect hand tools for damage. Do not use unsafe tools. 2) Keep tools clean, especially the gripping areas, to prevent slipping during operation. 3) Wear appropriate personal protective equipment, such as safety goggles and gloves. 4) Use hand tools with correct posture and technique; maintain a stable stance for safety, and avoid excessive force. 5) When using sharp tools, do not point the blade or sharp edges toward others. 6) When not in use, cover blades or sharp edges with protective guards. Avoid carrying tools by hand or placing them in pockets. 7) Do not misuse hand tools for other purposes. 8) Understand the characteristics of each hand tool and use them correctly.

Weidou Intelligent Technology specializes in selling German TECNODISC workholding fixtures, TECNODISC hydraulic tools, TECNODISC power tools, TECNODISC pneumatic tools, TECNODISC hand tools, TECNODISC electronic tools, TECNODISC welding tools, TECNODISC piping tools, TECNODISC explosion-proof tools, TECNODISC electrical power tools, TECNODISC automotive maintenance tools, TECNODISC fastening tools, TECNODISC cutting tools, TECNODISC striking tools, TECNODISC grinding tools, all original imports from Germany. Customers are welcome to inquire and order.