German StoneTools tools StoneTools models StoneTools prices

StoneTools tools refer to electrical safety tools, which are various specialized tools and devices designed to prevent accidents such as electric shock, burns, falls, and stumbling, thereby ensuring the personal safety of workers. In power systems, to successfully complete tasks without causing personal injury, operators must carry and use various safety tools. For example, electrical safety tools are required when inspecting operating electrical equipment, changing operating modes, or performing maintenance and tests; climbing safety tools are needed during line construction; and when working on live electrical equipment or in areas near live equipment, insulated safety tools must be used to prevent electric shock or arc burns. Electrical safety tools can be classified into four categories: personal protective equipment, insulated safety tools, climbing tools, and warning signs.

StoneTools tool classification

1) Metal cutting power tools, which mainly include: electric drills, magnetic base drills, electric reamers, electric knives, electric shears, electric punch shears, electric reciprocating saws, electric pipe saws, electric tapping machines, electric profile cutting machines, electric miter saws, electric weld seam bevelling machines, and multifunctional power tools. 2) Sanding and grinding power tools, which include: straight grinders, angle grinders, flexible shaft grinders, die grinders, flat sanders, belt sanders, straight polishers, and disc polishers. 3) Assembly power tools, which include: electric wrenches, torque-controlled electric wrenches, electric screwdrivers, electric swaging machines, self-tapping electric screwdrivers, and electric rivet guns. 4) Construction and road power tools, which include: concrete vibrators, electric hammers, hammer drills, impact drills, electric chisels, electric floor polishers, electric stone cutters, expansion bolt wrenches, wet grinders, electric steel disc cutters, electric threading machines, electric pipe bending machines, electric engineering drills, electric scrapers, and electric brick wall milling machines.

StoneTools tool parameters

The main performance parameters characterizing the basic working capability of lifting tools are lifting capacity and work class. (1) Lifting capacity refers to the maximum weight of the load allowed to be lifted under specified working conditions, i.e., the rated lifting capacity. If equipped with a permanent magnet lifting plate (see permanent magnet lifter), the lifting capacity should also include the weight of the permanent magnet lifting plate. (2) Work class is a performance parameter reflecting the overall working status of lifting tools and is an important basis for designing and selecting lifting tools. It is determined by the total number of work cycles required to be completed during the required service period and the load state. For lifting tools with strong regularity and high repeatability in operation procedures, such as electric hoists for loading and unloading ship cargo at docks, chain hoists for high-bay warehouses, and skip hoists for supplying blast furnaces, the work cycle is also an important parameter. The work cycle refers to the time required to complete one work cycle, which depends on the mechanism's operating speed and is related to the handling distance. The aforementioned lifting tools sometimes also use productivity as an important parameter, usually expressed as the lifting volume completed per hour. In current usage, efficiency is the primary consideration, followed by appearance and quality.

StoneTools tool usage

1) When placing the diamond dressing tool head into the holder, take care not to impact the grinding wheel surface. 2) Do not align the single-point diamond dressing tool head vertically with the center of the grinding wheel; it generally needs to be tilted 10-15°. 3) Do not "quench" (i.e., suddenly cool) a heated dressing tool. During dry dressing, the interval between two dressings must be sufficient to allow the heated dressing tool to cool down. 4) Do not assume the grinding wheel surface is ideally flat. At the start of dressing, locate the high points on the grinding wheel and perform dressing. 5) If possible, the amount removed from the grinding wheel each time must not exceed 0.001 inches on the radius. Excessive removal can cause premature wear and frequent breakage of the diamond dressing tool head. 6) However, do not remove too small an amount each time. Grinding wheels used on old or poorly rigid machine tools may not require dressing. 7) Note that the dressing tool should not remain in one position for too long. This will polish the grinding wheel surface, generate high temperatures, and damage the diamond dressing tool. Rotate the dressing tool at least once a day. 8) Do not continue to use worn or damaged dressing tools. Adjust or replace them promptly. 9) Do not select excessive removal amounts and too fast lateral feed rates during rough dressing, and then select small removal amounts and slow lateral feed rates during fine dressing. This will quickly damage the diamond dressing tool. If possible, it is recommended to select the same lateral feed rate for both rough and fine dressing.

Weidou Intelligent Technology specializes in selling German StoneTools workpiece clamps, StoneTools hydraulic tools, StoneTools power tools, StoneTools pneumatic tools, StoneTools hand tools, StoneTools electronic tools, StoneTools welding tools, StoneTools piping tools, StoneTools explosion-proof tools, StoneTools electrical tools, StoneTools automotive maintenance tools, StoneTools fastening tools, StoneTools cutting tools, StoneTools striking tools, StoneTools grinding tools, all originally imported from Germany. Welcome customers to inquire and order.