German STABILA tools STABILA models STABILA prices

STABILA tools refer to implements used in woodworking. They generally have sharp cutting edges, so safety must be prioritized during use. Frequent sharpening is required, especially for plane blades and chisels; keeping them sharp ensures both ease of use and quality workmanship, as the saying goes, "sharpening the axe does not delay the woodcutting." Woodworking tools are categorized into power tools, pneumatic tools, and hand tools. Power tools can be divided by function into multi-function tools (such as multi-purpose oscillating tools) and single-function tools (such as electric planers, jigsaws, circular saws, sanders, and engravers); pneumatic tools include polishers and nail guns; hand tools can be divided into measuring tools, hand saws, woodworking planes, wood files, hand chisels, and sandpaper.

STABILA tool classification

1) Screwdriver: A tool used to turn screws to position them, typically featuring a thin wedge-shaped tip that inserts into the slot or recess of the screw head—also known as a "screwdriver bit" or "turn-screw." 2) Wrench: A hand tool with an open end or box end that uses leverage to turn bolts, screws, nuts, and other threaded fasteners. Wrenches typically have jaws at one or both ends of the handle; applying force to the handle allows the bolt or nut to be turned. Apply force along the direction of thread rotation to tighten or loosen the bolt or nut. 3) Hammer: A tool used to strike objects to move or deform them. It is most commonly used for driving nails, correcting shapes, or breaking apart objects. Hammers come in various forms; a common design consists of a handle and a head. One face of the head is flat for striking, while the other may be shaped like a claw or wedge for pulling nails, or rounded. 4) Test pen: Also called a voltage tester or simply "electric pen." It is an electrical tool used to test whether wires are live. The pen body contains a neon bulb; if the bulb lights up during testing, it indicates the wire is live or is the phase conductor. The tip and tail of the test pen are made of metal, while the shaft is made of insulating material. When using a test pen, you must touch the metal part at the tail with your hand; otherwise, the circuit involving the live object, test pen, human body, and ground will not be complete, the neon bulb will not light up, and you may mistakenly judge the object as not live. 5) Tape measure: A common measuring tool in daily life. Steel tape measures are frequently seen, widely used in construction and decoration, and are essential household tools. Types include fiber tape measures, cloth tapes, and waist tapes. Luban rulers, Feng Shui rulers, and metric carpenter's rulers also fall under the category of steel tape measures. 6) Utility knife: A type of knife with a sharp blade used for cutting wallpaper and similar materials, hence the name "wallpaper knife," also known as a "craft knife." It is frequently used in renovation, decoration, and signboard industries. 7) Electrician's knife: A cutting tool commonly used by electricians. Standard electrician's knives consist of a blade, cutting edge, handle, and sheath. When not in use, the blade retracts into the handle. The base of the blade is hinged to the handle, featuring scale lines and markings; the front end forms a screwdriver tip, both sides have file surfaces, the cutting edge has an inwardly curved gouge ending in a point, and the handle has a safety button to prevent accidental blade retraction. The blade integrates multiple functions, allowing various wire connection operations to be completed with just one electrician's knife, eliminating the need for other tools, offering benefits such as simple structure, ease of use, and versatility. 8) Hacksaw: Includes hand saws (for household and woodworking use), pruning saws (for branch trimming), folding saws (for branch trimming), bow saws, coping saws (woodworking), rip saws (woodworking), and crosscut saws (woodworking). 9) Spirit level: A spirit level contains a bubble vial and can be used to inspect, measure, and debug whether equipment is installed horizontally. 10) Combination pliers: Combination pliers are clamping and cutting tools consisting of a head and handles. The head includes jaws, gripping teeth, cutting edges, and wire cutters. The functions of the various parts are: (1) The gripping teeth can be used to tighten or loosen nuts; (2) The cutting edges can be used to strip rubber or plastic insulation from soft wires, and also to cut wires and iron wires; (3) The wire cutters can be used to cut harder metal wires such as electrical wires and steel wires; (4) The insulating plastic sleeves on the pliers have a voltage resistance of 500V or higher, allowing live wire cutting. 11) Needle-nose pliers: Also called long-nose pliers, primarily used to cut fine single-strand and multi-strand wires, bend loops on single-strand wire terminals, and strip plastic insulation. They are also common tools for electricians (especially indoor electricians). They consist of pointed tips, cutting edges, and handles. Electrician's needle-nose pliers have insulating sleeves rated for 500V on the handles. Due to their pointed heads, they are suitable for operations in narrow spaces. To bend wire terminals with needle-nose pliers: first fold the wire end to the left, then bend it clockwise to the right against the screw. 12) Wire strippers: Wire strippers are common tools for indoor electricians, motor repair technicians, and instrumentation electricians; their appearance is shown below. They consist of cutting edges, wire crimping slots, and handles. The handles of wire strippers have insulating sleeves rated for a working voltage of 500V. Wire strippers are suitable for stripping insulation from plastic and rubber insulated wires and cable cores. Usage: Place the wire end to be stripped into the blade slot of the head, squeeze the two handles together by hand, then release; the insulation will separate from the core wire.

STABILA tool structural composition

The function of power components is to convert the mechanical energy of the prime mover into hydraulic pressure energy. This refers to the oil pump in a hydraulic system, which provides power to the entire hydraulic system. Common structural forms of hydraulic pumps include gear pumps, vane pumps, and piston pumps. Actuators (such as hydraulic cylinders and hydraulic motors) convert hydraulic pressure energy into mechanical energy, driving loads to perform linear reciprocating motion or rotary motion. Control components (i.e., various hydraulic valves) control and regulate the pressure, flow, and direction of fluid in the hydraulic system. Depending on the control function, hydraulic valves can be divided into pressure control valves, flow control valves, and directional control valves. Pressure control valves include relief valves (safety valves), reducing valves, sequence valves, and pressure relays; flow control valves include throttle valves, adjustment valves, and flow divider/combiner valves; directional control valves include check valves, pilot-operated check valves, shuttle valves, and directional valves. Depending on the control method, hydraulic valves can be divided into on/off control valves, fixed-value control valves, and proportional control valves. Auxiliary components include oil tanks, oil filters, oil pipes and pipe fittings, sealing rings, pressure gauges, and oil level/temperature gauges. Hydraulic oil is the working medium that transmits energy in hydraulic systems, including various mineral oils, emulsions, and synthetic hydraulic oils.

STABILA tool precautions

1) Before use, inspect hand tools for damage. Do not use unsafe tools. 2) Keep tools clean, especially the grip areas, to prevent slipping during operation. 3) Wear appropriate personal protective equipment such as goggles and gloves. 4) Use hand tools with correct posture and technique; maintain stable force application for safety, and avoid excessive force. 5) When using sharp tools, do not point the blade or sharp parts toward others. 6) When not in use, cover blades or sharp parts with protective guards; do not carry tools by hand or place them in pockets. 7) Do not misuse hand tools for unintended purposes. 8) Understand the characteristics of each hand tool and use them correctly.

Weidou Intelligent Technology specializes in selling German STABILA workholding fixtures, STABILA hydraulic tools, STABILA power tools, STABILA pneumatic tools, STABILA hand tools, STABILA electronic tools, STABILA welding tools, STABILA piping tools, STABILA explosion-proof tools, STABILA electrical power tools, STABILA automotive maintenance tools, STABILA fastening tools, STABILA cutting tools, STABILA striking tools, STABILA grinding tools, all original German imports. Welcome inquiries and orders from customers.