German Sitab tools Sitab models Sitab prices

Sitab tools are tools that work by using compressed air to drive a pneumatic motor and output kinetic energy. According to their basic operating methods, they can be divided into: 1) Rotary type (eccentric movable vane type). 2) Reciprocating type (volume piston type). General pneumatic tools mainly consist of the power output part, operation form conversion part, intake and exhaust path part, operation start and stop control part, tool housing and other main parts. Of course, pneumatic tool operation must also have an energy supply part, air filtration and air pressure regulation part, and tool accessories. Main types include air impact wrenches (also called pneumatic wrenches, air wrenches, air ratchets), pneumatic screwdrivers (also called pneumatic drivers, air screwdrivers), pneumatic grinders (also called pneumatic polishers, pneumatic wet grinders, pneumatic sanders, pneumatic grinding machines), pneumatic spray guns, pneumatic rivet guns, pneumatic nut setters, air chisels, air hammers, vibration-damping pneumatic saws, and vibration-damping pneumatic files.

Sitab tool applications and usage

The electric hydraulic oil pump can serve as the hydraulic pump for various hydraulic devices. When equipped with other hydraulic tools, the electric hydraulic oil pump can perform lifting, pressing, pipe bending, bar bending, straightening, shearing, assembly, disassembly, and other tasks, reducing labor intensity and improving work efficiency. During use, open the vent nut, turn on the switch on the oil collection block, plug in the power supply, and connect the quick coupler to the quick connector on the corresponding hydraulic device. Press the power switch; after the motor runs for 1-2 minutes, turn off the switch to set it to the pressure-boosting state. At this time, the output hydraulic oil will perform various tasks, with the output hydraulic oil self-pressurizing according to the increase in load until 63MPA. After work is completed, open the switch to relieve pressure. Once the hydraulic oil has returned, remove the quick coupler, tighten the vent nut, unplug the power cord, and close the switch.

Sitab tool structure and composition

The cross-sectional shape and distribution of the magnetic poles vary depending on the workpiece. Common structural types of electromagnetic chucks include rectangular and circular shapes. Rectangular magnetic poles are further divided into longitudinal and horizontal arrangements. Longitudinal arrangement of rectangular magnetic poles is suitable for fixing larger workpieces; horizontal arrangement of rectangular magnetic poles is suitable for fixing smaller workpieces. Circular chucks are suitable for fixing ring-shaped workpieces or workpieces with complex shapes. The main characteristics of ordinary electromagnetic chucks are: magnetic flux lines are evenly distributed on the surface of the magnetic disk, electromagnetic attraction cannot be concentrated, and the magnetic force per unit area is relatively small; the direction of magnetic force is perpendicular to the chuck surface and difficult to change, producing only one type of magnetic force for workpieces with the same contact area; the point of action of the magnetic force on the workpiece is limited to the contact surface between the workpiece and the chuck and cannot be changed arbitrarily. Therefore, during machining, there are disadvantages such as low positioning accuracy, insufficient clamping force, narrow scope of application, and low production efficiency.

Sitab tool usage

1) Before use, carefully inspect the tool to ensure there is no external damage, the switch operates flexibly without sticking, and the power cord and tool housing are intact. Use a 500V V megohmmeter to measure the insulation resistance between the winding and the housing; the value must not be less than O.5 MΩ. See the attached table for insulation resistance values. 2) Handheld electric tools with metal housings must have a reliable protective grounding wire. The power cord should be a multi-core soft rubber-sheathed cable, and the grounding protection wire at both ends must be securely connected. 3) Handheld electric tools should be used by dedicated personnel with certain professional knowledge. Strictly adhere to relevant safety operating procedures during use. 4) Before use, check whether the relevant electrical and mechanical protection devices are intact and functioning normally. Also ensure that the rotating parts rotate flexibly without sticking. 5) When using Class I handheld electric tools, users must wear prescribed protective equipment and use qualified protective gear. Take appropriate anti-electric shock safety measures as required, such as installing residual current devices (RCDs) in the power circuit, or having the user wear insulating gloves, insulating shoes, or stand on an insulating mat. When using Class II handheld electric tools in damp and confined spaces, install a residual current circuit breaker (RCCB) with an operating current of less than 1.5mA and an operating time of less than or equal to 0.1 seconds. The RCCB should be placed inside the container and monitored by a dedicated person. 6) Occupational hazards of using handheld electric tools. Arm vibration disease caused by long-term hand-transmitted vibration work was listed as one of China's statutory occupational diseases in 1957, also known as local vibration disease, typically manifested as episodic white finger.

Weidou Intelligent Technology specializes in selling German Sitab workholding fixtures, Sitab hydraulic tools, Sitab power tools, Sitab pneumatic tools, Sitab hand tools, Sitab electronic tools, Sitab welding tools, Sitab piping tools, Sitab explosion-proof tools, Sitab electrical power tools, Sitab automotive maintenance tools, Sitab fastening tools, Sitab cutting tools, Sitab striking tools, Sitab grinding tools. All Sitab products are original imports from Germany. Customers are welcome to inquire and order.