German SIMAFLEX tools, SIMAFLEX models, SIMAFLEX prices

SIMAFLEX tools are any tools connected to the robot edge (joint) with specific functions. This may include robot grippers, robot tool changers, robot collision sensors, robot rotary connectors, robot pressure tools, compliance devices, robot spray guns, robot deburring tools, robot arc welding torches, robot electric welding torches, etc. Robot end effectors are generally considered peripheral equipment of the robot, robot accessories, robot tools, and arm-end tools (EOA). Mechanical clamping end effectors used in industrial robots for loading and unloading are mostly two-finger claw types. Classified by finger motion, they can be divided into translational and rotational types. Classified by mechanical clamping method, they can be divided into external clamping and internal expansion types. Classified by mechanical structural characteristics, they can be divided into electric (electromagnetic), hydraulic, and pneumatic types, as well as their combinations.

SIMAFLEX tool classification

1) Squeeze-exhaust suction cups rely on downward squeezing force to expel all air from the suction cup, creating a negative pressure state inside to hold the workpiece. Advantages include simple structure, light weight, and low cost. However, the suction force is not large, so they are mostly used for workpieces that are not too large in size, thin, and light. 2) Airflow negative pressure suction cups: An airflow control valve injects compressed air from an air pump through a nozzle, forming a high-speed jet that removes air from the suction cup cavity, creating negative pressure to hold the object. If compressed air is available at the job site, using this type of suction cup is convenient and low-cost. 3) Vacuum pump exhaust suction cups: These use an electromagnetic control valve to connect the vacuum pump to the suction cup. When the control valve evacuates air, the air in the suction cup cavity is removed, creating negative pressure to hold the object. Conversely, when the control valve connects the suction cup to the atmosphere, the suction cup loses suction and releases the workpiece. The suction force of vacuum pump suction cups mainly depends on the size of the suction area and the degree of vacuum in the inner wall of the suction cup (referring to the thinness of the air in the inner q cavity). This type of suction cup is reliable and has strong suction, but requires a vacuum pump and airflow control system, resulting in higher costs. 4) Mechanical clamping type: Structure of a straight-bar dual-cylinder translational gripper. The gripper fingers are mounted on a straight bar equipped with finger mounting seats. When pressurized gas enters the rod-side chambers of the two single-acting dual cylinders, the two pistons move toward the center, clamping the workpiece; when no pressurized gas enters, springs push the two pistons outward, releasing the workpiece. To ensure synchronous movement of the two pistons, a flow divider valve is installed in the cylinder intake line. This type of end effector is used in loading and unloading assembly workstations.

SIMAFLEX tool structural composition

The function of power components is to convert the mechanical energy of the prime mover into liquid pressure energy. This refers to the oil pump in the hydraulic system, which provides power to the entire hydraulic system. The structural forms of hydraulic pumps generally include gear pumps, vane pumps, and piston pumps. The function of actuating components (such as hydraulic cylinders and hydraulic motors) is to convert the pressure energy of the liquid into mechanical energy, driving the load to perform linear reciprocating motion or rotary motion. Control components (i.e., various hydraulic valves) control and regulate the pressure, flow, and direction of the liquid in the hydraulic system. According to different control functions, hydraulic valves can be divided into pressure control valves, flow control valves, and directional control valves. Pressure control valves are further divided into relief valves (safety valves), reducing valves, sequence valves, pressure relays, etc.; flow control valves include throttle valves, adjustment valves, flow divider-combiner valves, etc.; directional control valves include check valves, pilot-operated check valves, shuttle valves, directional valves, etc. According to different control methods, hydraulic valves can be divided into on/off control valves, fixed-value control valves, and proportional control valves. Auxiliary components include oil tanks, oil filters, oil pipes and pipe joints, sealing rings, pressure gauges, oil level and oil temperature gauges, etc. Hydraulic oil is the working medium for transmitting energy in hydraulic systems, including various mineral oils, emulsions, and synthetic hydraulic oils.

SIMAFLEX tool usage

1) When placing the diamond dressing tool head into the holder, be careful not to impact the grinding wheel surface. 2) Do not align the single-point diamond dressing tool head vertically with the center of the grinding wheel; it generally needs to be tilted 10-15°. 3) Do not "quench" (i.e., suddenly cool) a heated dressing tool. During dry dressing, maintain sufficient interval time between dressings to allow the heated dressing tool to cool. 4) Do not assume the grinding wheel surface is ideally flat. At the start of dressing, locate the high point of the grinding wheel and perform dressing. 5) If possible, the amount of material removed from the grinding wheel each time should not exceed 0.001 inches on the radius. Excessive removal can cause premature wear and frequent breakage of the diamond dressing tool head. 6) However, do not remove too little material each time. Grinding wheels used on old or poorly rigid machine tools may not require dressing. 7) Note that the dressing tool should not remain in one position for too long. This will polish the grinding wheel surface, generate high temperatures, and damage the diamond dressing tool. Rotate the dressing tool at least once a day. 8) Do not continue to use worn or damaged dressing tools. Adjust or replace them promptly. 9) Do not select excessive removal amounts and too fast lateral feed rates during rough dressing, and then select small removal amounts and slow lateral feed rates during fine dressing. This will quickly damage the diamond dressing tool. If possible, it is recommended to select the same lateral feed rate for both rough and fine dressing.

Weidou Intelligent Technology specializes in selling German SIMAFLEX workpiece fixtures, SIMAFLEX hydraulic tools, SIMAFLEX power tools, SIMAFLEX pneumatic tools, SIMAFLEX hand tools, SIMAFLEX electronic tools, SIMAFLEX welding tools, SIMAFLEX piping tools, SIMAFLEX explosion-proof tools, SIMAFLEX electrical tools, SIMAFLEX automotive maintenance tools, SIMAFLEX fastening tools, SIMAFLEX cutting tools, SIMAFLEX striking tools, SIMAFLEX grinding tools, SIMAFLEX original German imports. Welcome customers to inquire and order.