German SIEVERT tools SIEVERT models SIEVERT prices

SIEVERT tools are tools that work by using compressed air to drive a pneumatic motor and output kinetic energy. According to their basic operating methods, they can be divided into: 1) Rotary type (eccentric movable vane type). 2) Reciprocating type (volume piston type). General pneumatic tools mainly consist of the power output part, operation form conversion part, intake and exhaust path part, operation start and stop control part, tool housing and other main parts. Of course, pneumatic tool operation must also have an energy supply part, air filtration and air pressure regulation part, and tool accessories. Main types include impact wrenches (also called pneumatic wrenches, air wrenches, air impact wrenches), pneumatic screwdrivers (also called pneumatic drivers, air screwdrivers), pneumatic grinders (also called pneumatic polishers, pneumatic wet grinders, pneumatic sanders, pneumatic grinding machines), pneumatic spray guns, pneumatic rivet guns, pneumatic nut setters, air chisels, air hammers, vibration-damping pneumatic saws, vibration-damping pneumatic files.

SIEVERT tool features

1) Air is easy to obtain, and the working pressure is low. Used air can be discharged locally without recovery pipelines. 2) Air has low viscosity and low flow resistance loss, making it convenient for centralized air supply and long-distance transmission. 3) Pneumatic actuators have high movement speeds. 4) Pneumatic systems have strong adaptability to the environment. They can work reliably in a wide temperature range, in humid and dusty environments. Slight leakage will not pollute the environment. There is no risk of fire or explosion, ensuring safe use. 5) Simple structure, convenient maintenance, and low cost. 6) Long service life of pneumatic components. 7) The execution output of pneumatic components is smaller than hydraulic ones. They move faster, have strong adaptability, and can work in harsh environments such as flammable, explosive, dusty, humid, and impactful conditions. They do not pollute the environment, have a long service life, simple construction, easy maintenance, and low price.

SIEVERT tool maintenance

1) Correct air supply system: The intake pressure at the tool inlet (not the air compressor outlet pressure) is generally 90PSIG (6.2Kg/cm^2). Too high or too low pressure will damage the tool's performance and service life. The intake air must contain sufficient lubricating oil so that the pneumatic motor inside the tool is fully lubricated (you can place a white paper at the tool exhaust to check for oil stains; normally, oil stains should be present). The intake air must be free of moisture. It is inappropriate if compressed air has not passed through an air dryer. 2) Do not arbitrarily disassemble tool parts before operation, as this will affect operator safety and cause tool damage. 3) If the tool has slight faults or cannot achieve its original function after use, do not continue to use it. Inspect it immediately. 4) Regularly (about once a week) inspect and maintain the tool. Add grease (Grease) to rotating parts such as bearings, and add oil (Oil) to the pneumatic motor part. 5) When using various tools, be sure to follow all safety regulations and operating instructions. 6) Select appropriate tools for the work. Tools that are too large can easily cause work injuries, and tools that are too small can easily cause tool damage.

SIEVERT tool usage

1) When placing the diamond dressing tool head into the collet, be careful not to impact the grinding wheel surface. 2) Do not align the single-point diamond dressing tool head vertically with the center of the grinding wheel. Generally, it needs to be tilted 10-15°. 3) Do not "quench" (i.e., suddenly cool) heated dressing tools. During dry dressing, the interval between two dressings must be sufficient to allow the heated dressing tool to cool. 4) Do not assume that the grinding wheel surface is ideally flat. At the start of dressing, find the high points on the grinding wheel and perform dressing. 5) If possible, the amount of removal from the grinding wheel each time should not exceed 0.001 inches on the radius of the grinding wheel. Excessive removal can cause premature wear and frequent breakage of the diamond dressing tool head. 6) However, do not remove too little material each time. Grinding wheels used on old or poorly rigid machine tools may not require dressing. 7) Note that you should not stay in one position for too long during dressing. This will polish the grinding wheel surface, generate high temperatures, and damage the diamond dressing tool. Rotate the dressing tool at least once a day. 8) Do not continue to use worn or damaged dressing tools. Adjust or replace them in time. 9) Do not select excessive removal amounts and fast lateral feed rates during rough dressing, and then select small removal amounts and slow lateral feed rates during fine dressing. This will quickly damage the diamond dressing tool. If possible, it is recommended to select the same lateral feed rate for both rough and fine dressing.

Weidou Intelligent Technology professionally sells German SIEVERT workpiece clamps, SIEVERT hydraulic tools, SIEVERT electric tools, SIEVERT pneumatic tools, SIEVERT manual tools, SIEVERT electronic tools, SIEVERT welding tools, SIEVERT pipe tools, SIEVERT explosion-proof tools, SIEVERT power tools, SIEVERT automotive maintenance tools, SIEVERT fastening tools, SIEVERT cutting tools, SIEVERT striking tools, SIEVERT grinding tools. SIEVERT original imports from Germany. Welcome customers to inquire and order.