German SCHWAN tools SCHWAN models SCHWAN prices

SCHWAN tools utilize electromagnetic technologies such as permanent magnets to assist in mechanical manufacturing processes. They can be categorized into magnetic fixtures, magnetic tools, magnetic molds, and magnetic auxiliary equipment. The use of magnetic tools can significantly improve production efficiency and reduce the labor intensity of employees. For some workpieces, clamping is inconvenient during machining and assembly due to their structural characteristics. Simply position the U-shaped iron core vertically on the worktable for processing. By embedding a magnet in the positioning block of the fixture, the workpiece can be firmly adsorbed onto the worktable equipped with the positioning block and accurately positioned. This greatly simplifies the fixture structure and improves work efficiency. Some products require welding small parts onto the workpiece; if accurate positioning is not achieved, it not only makes the work inconvenient but also fails to meet requirements.

SCHWAN tool features

1) Air is easily accessible, operates at low pressure, and used air can be discharged locally without requiring recovery pipelines. 2) Air has low viscosity and minimal flow resistance loss, facilitating centralized air supply and long-distance transmission. 3) Pneumatic actuators have high movement speeds. 4) Pneumatic systems have strong environmental adaptability, operating reliably in wide temperature ranges, humid, and dusty environments. Minor leaks do not pollute the environment, there is no risk of fire or explosion, and usage is safe. 5) Simple structure, easy maintenance, and low cost. 6) Long service life of pneumatic components. 7) The output force of pneumatic components is smaller than that of hydraulic systems, but they offer faster motion, strong adaptability, and can operate in harsh environments such as flammable, explosive, dusty, humid, and impact-prone areas. They do not pollute the environment, have a long service life, simple construction, are easy to maintain, and are low-cost.

SCHWAN tool precautions

Large saws are commonly used for thick and wide boards; small saws are used for narrow and thin lumber; coarse-toothed saws are used for cross-cutting; fine-toothed saws are used for tenons and shoulders. Saws with a larger set are required for hardwoods and wet wood, while saws with a smaller set are used for softwoods and dry wood. When using saws, strict attention must be paid to safe operating methods: 1) Before using a frame saw, adjust the blade angle using the knob; conventionally, it should form an angle of 45° with the plane of the wooden frame. Tighten the tension rope with the twist stick to keep the blade taut and straight. When starting the cut, hold the saw handle firmly with the right hand and place the left hand at the starting point, pushing and pulling gently a few times. Do not apply excessive force. Do not twist the saw left or right during cutting. Apply downward pressure on the forward stroke and lift lightly on the return stroke, maintaining a uniform rhythm. Hold the part being cut off steady with your hand as the cut nears completion. After use, loosen the blade and hang it in a secure location. 2) When using a crosscut saw, apply balanced force with both hands to prevent the saw from drifting toward the side with greater force. Correct any deviation slowly to prevent binding or breaking the blade. 3) When using a coping saw (wire saw), do not apply excessive force or pull too quickly to avoid breaking the wire. During operation, do not position your head above the upper end of the bow frame to avoid facial injury if the wire snaps. 4) Regularly check the sharpness of the blade and the stability of the saw frame and handle. Repair blades with dull or uneven teeth promptly. Repair or replace damaged ropes, nuts, knobs, handles, and wooden frames before continuing use.

SCHWAN tool usage

1) When placing the diamond dressing tool into the holder, avoid impacting the grinding wheel surface. 2) Do not align a single-point diamond dressing tool vertically with the center of the grinding wheel; it generally needs to be inclined at 10-15°. 3) Do not "quench" (suddenly cool) a heated dressing tool. During dry dressing, maintain sufficient intervals between dressing passes to allow the heated tool to cool. 4) Do not assume the grinding wheel surface is ideally flat. Identify the high spots on the wheel at the start of dressing and proceed accordingly. 5) If possible, the material removal per dressing pass should not exceed 0.001 inches on the wheel radius. Excessive removal can cause premature wear and frequent fracture of the diamond dressing tool. 6) However, do not remove too little material in each pass. Grinding wheels used on old or less rigid machines may not require dressing. 7) Avoid holding the dresser in one position for too long during dressing, as this will polish the wheel surface, generate high temperatures, and damage the diamond dressing tool. Rotate the dressing tool at least once daily. 8) Do not continue to use worn or damaged dressing tools. Adjust or replace them promptly. 9) Do not select excessive removal amounts and fast lateral feed rates for rough dressing, followed by small removal amounts and slow lateral feed rates for finish dressing. This will rapidly damage the diamond dressing tool. If possible, it is recommended to use the same lateral feed rate for both rough and finish dressing.

Weidou Intelligent Technology specializes in selling German SCHWAN workholding fixtures, SCHWAN hydraulic tools, SCHWAN power tools, SCHWAN pneumatic tools, SCHWAN hand tools, SCHWAN electronic tools, SCHWAN welding tools, SCHWAN pipe tools, SCHWAN explosion-proof tools, SCHWAN electrical tools, SCHWAN automotive maintenance tools, SCHWAN fastening tools, SCHWAN cutting tools, SCHWAN striking tools, and SCHWAN grinding tools. All items are original German imports. Customers are welcome to inquire and order.