German SAIT FRANCE tools, SAIT FRANCE models, SAIT FRANCE prices

SAIT FRANCE tools are any functional tools connected to the edge (joint) of a robot. This may include robot grippers, robot tool changers, robot collision sensors, robot rotary connectors, robot pressure tools, compliance devices, robot spray guns, robot deburring tools, robot arc welding torches, robot electric welding torches, etc. Robot end-effectors are generally considered peripheral equipment, accessories, robot tools, or arm-end tools (EOA). Mechanical clamping end-effectors used in industrial loading and unloading robots are mostly two-finger claw types. Classified by finger motion, they can be divided into translational and rotational types. Classified by mechanical clamping method, they can be divided into external clamping and internal expansion types. Classified by mechanical structural characteristics, they can be divided into electric (electromagnetic), hydraulic, and pneumatic types, as well as their combinations.

SAIT FRANCE tool classification

1) Screwdriver: A tool used to turn screws to position them, typically with a thin wedge-shaped head that inserts into the slot or recess of the screw head—also known as a "screwdriver". 2) Wrench: A hand tool with an open end or box end that uses leverage to turn bolts, screws, nuts, and other threaded fasteners. Wrenches usually have jaws at one or both ends of the handle to apply external force; applying force along the direction of thread rotation allows turning the bolt or nut. 3) Hammer: A tool used to strike objects to move or deform them. Most commonly used for driving nails, straightening, or breaking apart objects. Hammers come in various forms; a common form consists of a handle and a head. One side of the head is flat for striking, while the other is the hammer head. The hammer head shape can be like a claw (for pulling nails) or wedge-shaped. There are also round-head hammers. 4) Test pen: Also called a voltage tester or simply "electric pen". It is an electrical tool used to test whether wires are live. The pen body contains a neon bulb; if the bulb lights up during testing, it indicates the wire is live or is the live wire of a circuit. The tip and tail of the test pen are made of metal, while the pen shaft is made of insulating material. When using a test pen, you must touch the metal part at the tail with your hand; otherwise, because the live object, test pen, human body, and ground do not form a circuit, the neon bulb will not light up, leading to a misjudgment that the live object is not energized. 5) Tape measure: A common measuring tool in daily life. Steel tape measures are frequently seen, commonly used in construction and decoration, and are essential household tools. Types include fiber tape measures, leather tapes, waist tapes, etc. Luban rulers, Feng Shui rulers, and Wen Gong rulers also belong to the category of steel tape measures. 6) Utility knife: A type of knife with a sharp blade used for cutting wallpaper and similar materials, hence the name "wallpaper knife," also known as a "craft knife". Frequently used in renovation, decoration, and signboard industries. 7) Electrician's knife: A cutting tool commonly used by electricians. Ordinary electrician's knives consist of a blade, cutting edge, handle, and lanyard. When not in use, the blade retracts into the handle. The base of the blade is hinged to the handle, featuring scale lines and markings. The front end forms a screwdriver tip, both sides have file surfaces, the cutting edge has an inwardly curved notch ending in a point, and the handle has a protection button to prevent the blade from snapping back. The blade integrates multiple functions, allowing various wire connection operations with just one electrician's knife, eliminating the need for other tools. It offers benefits such as simple structure, ease of use, and versatility. 8) Hacksaw: Includes hand saws (household, woodworking), pruning saws (branch trimming), folding saws (branch trimming), bow saws, veneer saws (woodworking), rip saws (woodworking), and crosscut saws (woodworking). 9) Spirit level: A spirit level contains a bubble vial and can be used to inspect, measure, and debug whether equipment is installed horizontally. 10) Wire cutters: Wire cutters are clamping and cutting tools consisting of a head and handles. The head includes jaws, teeth, cutting edges, and shearing edges. The functions of the parts are: (1)) The teeth can be used to tighten or loosen nuts; (2)) The cutting edges can be used to strip rubber or plastic insulation from soft wires, and to cut wires and iron wires; (3)) The shearing edges can be used to cut harder metal wires such as electrical wires and steel wires; (4)) The insulating plastic sleeves on the pliers withstand voltages above 500V, allowing live wire cutting. 11) Needle-nose pliers: Also called long-nose pliers, mainly used to cut fine single-strand and multi-strand wires, bend loops on single-strand wire joints, and strip plastic insulation. They are commonly used by electricians (especially indoor electricians). They consist of pointed tips, cutting edges, and handles. Electrician's needle-nose pliers have insulating sleeves rated for 500V on the handles. Due to the pointed head, they are suitable for operations in narrow spaces. To bend wire joints with needle-nose pliers: first fold the wire end to the left, then bend it clockwise to the right against the screw. 12) Wire strippers: Wire strippers are commonly used by indoor electricians, motor repair technicians, and instrument electricians. Their appearance is shown below. They consist of cutting edges, crimping jaws, and handles. The handles of wire strippers have insulating sleeves rated for 500V. Wire strippers are suitable for stripping insulation from plastic and rubber insulated wires and cable cores. Usage: Place the wire end to be stripped in the jaw notch, squeeze the two handles together, then release; the insulation will separate from the core wire.

SAIT FRANCE tool usage

1) Select the appropriate saw blade for the workpiece. For example, use 14 teeth per inch for solid or thick soft metals; 18 teeth per inch for tool steel, iron pipes, and hard metals; and 24 teeth per inch for sheet metal, metal pipes, and thin iron bars. 2) Push forward to saw, and lift gently when pulling back. 3) Choose a wrench of appropriate size according to the nature of the work. 4) When using an adjustable wrench, apply force towards the fixed jaw, never towards the movable jaw. 5) If the wrench opening is worn or slips during use, do not continue using it to avoid slipping. 6) Do not use a wrench as a hammer for striking. 5) Do not add a pipe to the end of the wrench handle to increase torque. 7) Press the inner side of the first leg of the square against the edge of the wooden board, and draw along the inner side of the second leg with a pencil to mark a perpendicular line. 8) Select the appropriate screwdriver according to the size and shape of the screw head slot. 9) Do not strike the screwdriver handle with a hammer; replace damaged handles immediately. 10) Do not use a screwdriver as a chisel or lever. 11) Use an electrician's screwdriver to test current; do not use ordinary screwdrivers to test high voltage. 12) Do not grind the screwdriver tip to avoid damaging the hardened surface. 13) Do not keep screwdrivers in shirt or trouser pockets to avoid injury from collisions or falls.

SAIT FRANCE tool usage

1) Carefully inspect before use. Ensure there is no external damage, the switch operates flexibly without sticking, and the power cord and tool housing are intact. Use a 500V megohmmeter to measure the insulation resistance between the winding and the housing; it must not be less than O.5 megohms. See the attached table for insulation resistance values. 2) Handheld power tools with metal housings must have a reliable protective grounding wire. The power cord should be a multi-core soft rubber-sheathed cable, with the grounding wire securely connected at both ends. 3) Handheld power tools should be used by specialized personnel with professional knowledge. Strictly adhere to relevant safety operating procedures during use. 4) Before use, check that related electrical and mechanical protection devices are intact and functioning normally. Also ensure rotating parts move flexibly without sticking. 5) When using Class I handheld power tools, users must wear prescribed protective equipment and set up qualified protective gear. Take corresponding anti-electric shock safety measures as required, such as installing residual current devices (RCDs) in the power circuit, or wearing insulating gloves, insulating shoes, or standing on insulating mats. When using Class II handheld power tools in damp and narrow places, install a leakage switch with an operating current less than 1.5mA and an action time less than or equal to 0.1 seconds. The leakage switch should be placed inside the container and supervised by dedicated personnel. 6) Occupational hazards of using handheld power tools. Arm vibration disease caused by long-term hand-transmitted vibration work was listed as one of China's statutory occupational diseases in 1957, also known as local vibration disease, typically manifesting as episodic white finger.

Weidou Intelligent Technology specializes in selling German SAIT FRANCE workholding fixtures, SAIT FRANCE hydraulic tools, SAIT FRANCE power tools, SAIT FRANCE pneumatic tools, SAIT FRANCE hand tools, SAIT FRANCE electronic tools, SAIT FRANCE welding tools, SAIT FRANCE piping tools, SAIT FRANCE explosion-proof tools, SAIT FRANCE electrical power tools, SAIT FRANCE automotive maintenance tools, SAIT FRANCE fastening tools, SAIT FRANCE cutting tools, SAIT FRANCE striking tools, SAIT FRANCE grinding tools. SAIT FRANCE original imports from Germany. Welcome inquiries and orders from customers.