German RIEGGER tools RIEGGER models RIEGGER prices

RIEGGER tools refer to implements used in woodworking. They generally have sharp cutting edges, so safety must be prioritized during use. Frequent sharpening is required, especially for plane blades and chisels; keeping them sharp ensures ease of use and quality workmanship, as implied by the saying "sharpening the axe does not delay the woodcutting." Woodworking tools are categorized into power tools, pneumatic tools, and hand tools. Power tools can be divided by function into multi-function tools (such as multi-tools) and single-function tools (such as electric planers, jigsaws, circular saws, sanders, and engravers); pneumatic tools include polishers and nail guns; hand tools can be divided into measuring tools, hand saws, woodworking planes, wood files, hand chisels, and sandpaper.

RIEGGER tool types

1) Frame saw. Also known as a buck saw, it consists of an H-shaped wooden frame, twisted rope with toggle, saw blade, etc. The ends of the saw blade are fixed to the frame with knobs, which can also be used to adjust the blade angle. After tightening the twisted rope, the blade is tensioned and ready for use. Frame saws are classified into coarse, medium, and fine types based on blade length and tooth pitch. Coarse saw blades are 650—750mm long, with a tooth pitch of 4—5mm; coarse saws are mainly used for cutting thicker lumber. Medium saw blades are 550—650mm long, with a tooth pitch of 3—4mm; medium saws are mainly used for cutting thin lumber or cutting tenons. Fine saw blades are 450—500mm long, with a tooth pitch of 2—3mm; fine saws are mainly used for cutting finer wood and cutting tenon shoulders. 2) Knife saw. A knife saw mainly consists of a saw edge and a handle, and can be divided into single-sided, double-sided, and backed knife saws. Single-sided knife saws are 350mm long, with teeth on one side; depending on the function of the teeth, they can be divided into rip-cut and cross-cut types. Double-sided knife saws are 300mm long, with teeth on both sides; typically, one side is for rip-cutting and the other for cross-cutting. Backed knife saw blades are 250—300mm long; the back of the blade is reinforced with a steel strip, the teeth are finer, and they are available in rip-cut and cross-cut versions. 3) Groove saw. A groove saw consists of a handle and a saw blade, with the blade being approximately 200mm long. Groove saws are mainly used for cutting grooves in wood. 4) Panel saw. Also known as a hand saw, it consists of a handle and a saw blade, with the blade being approximately 250—750mm long and a tooth pitch of 3—4mm; panel saws are mainly used for cutting wider boards. 5) Keyhole saw. The blade is narrow and long, with a pointed tip, and a length of approximately 300—400mm. Keyhole saws are mainly used for cutting small holes and slots. 6) Compass saw. Also known as a bow saw, its construction is similar to that of a frame saw, but the blade is narrower (approximately 10mm), and it is mainly used for cutting arcs and curves. 7) Wire saw. Also known as a bow saw, it is made by bending a bamboo strip into a bow shape, with wire stretched between the ends; serrated edges are formed on the wire to perform the cutting. The wire is approximately 200—600mm long, and the saw bow is 800—900mm long. Wire saws are mainly used for cutting complex curves and openings.

RIEGGER tool structure and composition

The cross-sectional shape and distribution of the pole cores vary depending on the workpiece. Common structural types of electromagnetic chucks include rectangular and circular configurations. Rectangular magnetic poles are arranged either longitudinally or transversely. Longitudinal arrangement of rectangular magnetic poles is suitable for securing larger workpieces, while transverse arrangement is suitable for securing smaller workpieces. Circular chucks are suitable for securing ring-shaped workpieces or workpieces with complex geometries. The main characteristics of standard electromagnetic chucks are: magnetic flux lines are evenly distributed across the chuck surface, magnetic attraction cannot be concentrated, and the magnetic force per unit area is relatively low; the direction of the magnetic force is perpendicular to the chuck surface and difficult to alter, generating only one type of magnetic force for workpieces with the same contact area; the point of application of the magnetic force on the workpiece is limited to the contact surface between the workpiece and the chuck and cannot be freely adjusted. Therefore, disadvantages during machining include low positioning accuracy, low clamping force, narrow scope of application, and low production efficiency.

RIEGGER tool usage

1) Non-sparking tools provide safety assurance for personnel working in flammable, explosive, and corrosive environments, enhancing social safety and allowing workers to operate with greater peace of mind. After daily use, non-sparking tools require proper maintenance, which is critical for their service life; improper maintenance may prevent the tools from serving effectively over the long term. First, store the tools in a dry place to prevent damage to working components. In daily operations, after 20 consecutive strikes, remove adhered debris from the tool surface, wipe clean, and then resume use. Do not use continuously, as prolonged friction may cause overheating and potential damage to the tool. 2) After use, wipe off surface dirt and debris, and store in a dry, safe place. 3) For striking tools, do not strike continuously; allow appropriate intervals after ten strikes, and promptly remove adhered debris before continuing use. 4) Do not exceed the rated torque when using wrenches; do not extend leverage by using sleeves or binding other metal rods, and do not use hammers to tighten fasteners (except for strike-face wrenches). 5) Cutting-edge tools should be gently touched to a grinding wheel in a water trough for sharpening; avoid excessive force and prolonged contact with the grinding wheel. 6) During actual operation with striking and chiseling tools, clear site debris and corrosive oxides from the work surface to prevent third-party impact. Based on the above performance and usage, aluminum-copper alloys are more suitable for atmospheric pressure equipment and environments with less stringent explosion-proof requirements (such as gas stations and small oil depots). Beryllium-copper alloy non-sparking tools are suitable for more demanding environments (such as refineries, gas transfer stations, gas extraction plants, and drilling teams). 7) Remove surface oil stains before using various products, and refer to the instructions for steel tools for usage guidelines.

Weidou Intelligent Technology professionally sells German RIEGGER workholding fixtures, RIEGGER hydraulic tools, RIEGGER power tools, RIEGGER pneumatic tools, RIEGGER hand tools, RIEGGER electronic tools, RIEGGER welding tools, RIEGGER pipe tools, RIEGGER non-sparking tools, RIEGGER electrical tools, RIEGGER automotive maintenance tools, RIEGGER fastening tools, RIEGGER cutting tools, RIEGGER striking tools, RIEGGER grinding tools, RIEGGER original German imports. Welcome inquiries and orders from users.