German remko tools remko models remko prices

remko tools are any functional tools connected to the edge (joint) of a robot. This may include robot grippers, robot tool changers, robot collision sensors, robot rotary connectors, robot pressure tools, compliance devices, robot spray guns, robot deburring tools, robot arc welding torches, robot electric welding torches, etc. Robot end-effectors are generally considered peripheral equipment of the robot, robot accessories, robot tools, or arm-end tools (EOA). Mechanical clamping end-effectors used in industrial robots for loading and unloading are mostly two-finger claw types. Classified by finger motion, they can be divided into translational and rotational types. Classified by mechanical clamping method, they can be divided into external clamping and internal expansion types. Classified by mechanical structural characteristics, they can be divided into electric (electromagnetic), hydraulic, and pneumatic types, as well as their combinations.

remko tool types

1) Frame saw. Also known as a buck saw, it consists of an I-shaped wooden frame, twisted rope and twist pieces, and a saw blade. Both ends of the saw blade are fixed to the frame with knobs, which can also be used to adjust the angle of the blade. After the twisted rope is tightened, the saw blade is taut and ready for use. Frame saws are classified into coarse, medium, and fine types based on blade length and tooth pitch. Coarse saw blades are 650—750mm long, with a tooth pitch of 4—5mm; coarse saws are mainly used for cutting thicker wood. Medium saw blades are 550—650mm long, with a tooth pitch of 3—4mm; medium saws are mainly used for cutting thin wood or cutting tenons. Fine saw blades are 450—500mm long, with a tooth pitch of 2—3mm; fine saws are mainly used for cutting finer wood and cutting tenon shoulders. 2) Knife saw. A knife saw mainly consists of a saw blade and a handle, and can be divided into single-sided, double-sided, and back-backed knife saws. Single-sided knife saws have a blade length of 350mm, with teeth on one side; depending on the function of the teeth, they can be divided into rip-cut and cross-cut types. Double-sided knife saws have a blade length of 300mm, with teeth on both sides; typically, one side is for rip-cutting and the other for cross-cutting. Back-backed knife saws have a blade plate length of 250—300mm; the back of the blade is straightened with a steel strip, and the teeth are finer, available in rip-cut and cross-cut types. 3) Groove saw. A groove saw consists of a handle and a saw blade, with the blade approximately 200mm long. Groove saws are mainly used for cutting grooves in wood. 4) Panel saw. Also known as a hand saw. It consists of a handle and a saw blade, with the blade approximately 250—750mm long and a tooth pitch of 3—4mm; panel saws are mainly used for cutting wider wooden boards. 5) Narrow hand saw. The blade is narrow and long, with a pointed front end, approximately 300—400mm in length. Narrow hand saws are mainly used for cutting narrow holes and slots. 6) Coping saw. Also known as a fret saw, its construction is similar to that of a frame saw, but the blade is narrower (approximately 10mm), mainly used for cutting arcs, curves, and other shapes. 7) Wire saw. Also known as a bow saw, it is made by bending a bamboo strip into a bow shape, with steel wire stretched between the two ends. Saw-toothed ridges are cut into the steel wire, using the sharp edges of these ridges for cutting. The steel wire is approximately 200—600mm long, and the saw bow is 800—900mm long. Wire saws are mainly used for cutting complex curves and opening holes.

remko tool structure and composition

The cross-sectional shape and distribution of the magnetic core vary depending on the workpiece. Common structures of electromagnetic chucks include rectangular and circular types. Rectangular magnetic poles are further divided into longitudinal and horizontal arrangements. Longitudinal arrangement of rectangular magnetic poles is suitable for fixing larger workpieces; horizontal arrangement is suitable for fixing smaller workpieces. Circular chucks are suitable for fixing ring-shaped workpieces or workpieces with complex shapes. The main characteristics of ordinary electromagnetic chucks are: magnetic flux lines are evenly distributed on the surface of the chuck, magnetic attraction cannot be concentrated, and the magnetic force per unit area is relatively small; the direction of magnetic force is perpendicular to the chuck surface and difficult to change, producing only one type of magnetic force for workpieces of the same contact area; the point of action of the magnetic force on the workpiece is limited to the contact surface between the workpiece and the chuck and cannot be changed arbitrarily. Therefore, during machining, there are disadvantages such as low positioning accuracy, insufficient clamping force, narrow scope of application, and low production efficiency.

remko tool features

1) Lifting tools are usually compact in size and simple in mechanism, capable of performing lifting and horizontal movements. 2) The loads lifted by lifting tools vary widely. Some heavy objects weigh hundreds or even thousands of tons, some objects are tens of meters long, and shapes are often irregular, including bulk materials, molten states, and flammable, explosive, or hazardous items, making the lifting process complex and dangerous. 3) Some lifting tools need to operate within a large spatial range; some require tracks and wheels (such as tower cranes and bridge cranes); some require tires or crawler tracks for ground movement (such as truck cranes and crawler cranes); some need to move along steel cables (such as passenger and freight aerial ropeways). The large activity space means that accidents can have a wide impact. 4) Some lifting tools need to directly transport personnel for vertical movement on guide rails, platforms, or steel cables (such as elevators and lifting platforms), so their reliability directly affects personal safety. 5) Lifting tools have many exposed and moving parts that often come into direct contact with lifting personnel (such as hooks and steel cables), posing many potential accidental hazards. 6) Complex operating environments. From large integrated steel enterprises to modern ports, construction sites, railway hubs, and tourist attractions, lifting tools are in operation. Workplaces often encounter hazardous factors such as high temperatures, high pressure, flammable and explosive materials, power transmission lines, and strong magnetic fields, posing threats to equipment and personnel. 7) Lifting operations often require coordination among multiple people. A single operation requires skilled coordination, coordinated actions, and mutual awareness among command, rigging, and operating personnel. Personnel should have the ability to handle on-site emergencies. Close cooperation among multiple workers is often challenging. These working characteristics of lifting tools determine their significant relationship with safe production. Any negligence in the design, manufacturing, installation, use, and maintenance of lifting tools may cause casualties or equipment accidents, resulting in both personal injuries and significant economic losses.

Weidou Intelligent Technology professionally sells German remko workpiece fixtures, remko hydraulic tools, remko power tools, remko pneumatic tools, remko hand tools, remko electronic tools, remko welding tools, remko pipe tools, remko explosion-proof tools, remko electrical tools, remko automotive maintenance tools, remko fastening tools, remko cutting tools, remko striking tools, remko grinding tools, remko original imports from Germany. Welcome customers to inquire and order.