German RAKSO tools RAKSO models RAKSO prices

RAKSO tools integrate hydraulic systems with conventional tools into a unified whole. They convert powerful hydraulic power into mechanical motions such as reciprocating linear motion, rotary motion, and cycloidal motion. A complete hydraulic tool system consists of five parts: power elements, actuating elements, control elements, auxiliary elements, and hydraulic oil. Hydraulic tools include: hydraulic wrenches, electric pumps dedicated to hydraulic wrenches, hydraulic jacks, hydraulic bolt tensioners, hydraulic flange spreaders, hydraulic nut splitters, hydraulic pullers, etc. Hydraulic tools offer the advantages of high efficiency and convenience. A complete hydraulic tool system consists of five parts: power elements, actuating elements, control elements, auxiliary elements, and hydraulic oil.

RAKSO tool classification

1) Screwdriver: A tool used to turn screws to position them, typically featuring a thin wedge-shaped tip that inserts into the slot or recess of the screw head; also known as a "screwdriver". 2) Wrench: A hand tool with an open end or box end that uses the lever principle to turn bolts, screws, nuts, and other threaded fasteners. Wrenches usually have jaws at one or both ends of the handle; applying external force to the handle allows turning of the bolt or nut held in the opening or socket. When in use, apply external force to the handle along the direction of thread rotation to turn the bolt or nut. 3) Hammer: A tool used to strike objects to move or deform them. Most commonly used for driving nails, correcting, or splitting objects. Hammers come in various forms; a common form consists of a handle and a head. One side of the head is flat for striking, while the other is the hammer head. The hammer head can be shaped like a claw (for pulling nails) or wedge-shaped. There are also ball-peen hammer heads. 4) Test pencil: Also called a voltage tester pen, abbreviated as "electric pen". It is an electrical tool used to test whether wires are live. The pen body contains a neon bulb; if the neon bulb lights up during testing, it indicates that the wire is live or is the live wire of a circuit. The tip and tail of the test pencil are made of metal, while the pen shaft is made of insulating material. When using a test pencil, you must touch the metal part at the tail end with your hand; otherwise, because the charged object, test pencil, human body, and earth do not form a closed loop, the neon bulb in the test pencil will not light up, leading to misjudgment that the charged object is not live. 5) Tape measure: A tape measure is a commonly used measuring tool in daily life. Steel tape measures are frequently seen, commonly used in construction and decoration, and are essential household tools. Types include fiber tape measures, leather tapes, waist tapes, etc. Lu Ban rulers, Feng Shui rulers, and Wen Gong rulers also belong to the category of steel tape measures. 6) Utility knife: A type of knife with a sharp blade used for cutting wallpaper and similar materials, hence the name "wallpaper knife," also known as a "craft knife." Frequently used in renovation, decoration, and signboard industries. 7) Electrician's knife: An electrician's knife is a cutting tool commonly used by electricians. A standard electrician's knife consists of a blade, cutting edge, handle, and sheath. When not in use, retract the blade into the handle. The base of the blade is hinged to the handle, featuring scale lines and markings; the front end forms a screwdriver tip, both sides have file surfaces, the cutting edge has an inwardly curved notch ending in a point, and the handle has a protection button to prevent the blade from snapping back. The blade of the electrician's knife integrates multiple functions; using just one electrician's knife allows completion of various wire connection operations without carrying other tools, offering benefits such as simple structure, ease of use, and multifunctionality. 8) Hacksaw: Includes hand saws (household, woodworking), pruning saws (branch trimming), folding saws (branch trimming), bow saws, veneer saws (woodworking), rip saws (woodworking), and crosscut saws (woodworking). 9) Spirit level: A spirit level contains a bubble vial and can be used to inspect, measure, and debug whether equipment is installed level. 10) Combination pliers: Combination pliers are clamping and cutting tools consisting of a head and handles. The head includes jaws, serrated grips, cutting edges, and wire cutters. The functions of the various parts of the pliers are: (1) The serrated grips can be used to tighten or loosen nuts; (2) The cutting edges can be used to strip the rubber or plastic insulation from soft wires, and also to cut wires and iron wires; (3) The wire cutters can be used to cut harder metal wires such as electrical wires and steel wires; (4) The insulating plastic sleeves on the pliers have a voltage resistance of 500V or higher, allowing live wire cutting. 11) Needle-nose pliers: Also called long-nose pliers, primarily used for cutting thin single-strand and multi-strand wires, bending loops for single-strand wire connectors, and stripping plastic insulation. They are also one of the commonly used tools for electricians (especially indoor electricians). They consist of pointed tips, cutting edges, and handles. The handles of electrician's needle-nose pliers are covered with insulating sleeves rated for 500V. Due to their pointed heads, they are suitable for operations in narrow spaces. The method for bending wire connectors with needle-nose pliers is: first fold the wire end to the left, then bend it clockwise to the right against the screw. 12) Wire strippers: Wire strippers are one of the commonly used tools for indoor electricians, motor repair technicians, and instrumentation electricians; their appearance is shown in the figure below. They consist of cutting edges, wire crimping slots, and handles. The handles of wire strippers are covered with insulating sleeves rated for a working voltage of 500V. Wire strippers are suitable for stripping the insulation from plastic and rubber insulated wires and cable cores. The usage method is: place the wire end to be stripped into the blade slot of the plier head, squeeze the two handles together with your hand, then release, and the insulation will separate from the core wire.

RAKSO tool selection guide

1) Distinguish between household and professional use as needed. Most power tools are designed for professionals, so differentiate between professional and general household tools when purchasing. The difference between professional and general household tools usually lies in power; professional tools have higher power to help professionals reduce workload. Since general household tasks are smaller and the workload is relatively light, the input power of the tool does not need to be very high. 2) The tool's outer packaging should have clear patterns, no damage, a sturdy plastic box, and durable fasteners for opening the plastic box. 3) The tool's appearance should have uniform color, with no visible flow marks or dents on the surface of plastic parts, and no scratches or collision marks. The assembly misalignment between housing parts should be ≤ 0.5mm. The coating on aluminum castings should be smooth, aesthetically pleasing, and free from defects. The entire unit should be free from oil and stains. When held by hand, the switch handle should be flat. The length of the power cable should generally be no less than 2 meters. 4) The nameplate parameters of the tool should match those on the CCC certificate. The manual should include the detailed address and contact information of the manufacturer and production plant. The nameplate or certificate of conformity should include a traceable batch number. 5) Hold the tool by hand, connect to power, and frequently operate the switch to start the tool repeatedly. Observe whether the on/off function of the tool switch is reliable. At the same time, observe whether there are any abnormalities in nearby televisions or fluorescent lamps to confirm whether the tool is equipped with an effective radio interference suppressor. 6) Run the tool under power for one minute. While running, hold it by hand; you should not feel any abnormal vibration. Observe the commutation sparks; the commutation spark level should not exceed 3/2 grade. Generally, looking inward from the air inlet of the tool, there should be no obvious arcing on the commutator surface. During operation, there should be no abnormal noise.

RAKSO tool precautions

1) Before use, check hand tools for damage. Do not use unsafe tools. 2) Keep tools clean, especially the gripping parts, to prevent slipping and dropping during work. 3) Wear appropriate personal protective equipment such as goggles and gloves. 4) Use hand tools with correct posture and technique; maintain stable force output for safety, and do not exert excessive force. 5) When using sharp tools, do not point the blade or sharp parts towards others. 6) When not in use, cover the blade or sharp parts with protective guards; avoid carrying tools by hand or placing them in pockets. 7) Do not misuse hand tools for other purposes. 8) Understand the characteristics of each hand tool and use them correctly.

Weidou Intelligent Technology professionally sells German RAKSO workpiece fixtures, RAKSO hydraulic tools, RAKSO power tools, RAKSO pneumatic tools, RAKSO hand tools, RAKSO electronic tools, RAKSO welding tools, RAKSO pipe tools, RAKSO explosion-proof tools, RAKSO electrical power tools, RAKSO automotive maintenance tools, RAKSO fastening tools, RAKSO cutting tools, RAKSO striking tools, RAKSO grinding tools, RAKSO original German imports. Welcome customers to inquire and order.