German PROXXON tools PROXXON models PROXXON prices

PROXXON tools refer to implements used in woodworking. They generally have sharp cutting edges, so safety must be prioritized during use. Frequent sharpening is required, especially for plane blades and chisels; keeping them sharp ensures both ease of use and quality, as implied by the saying "sharpening the axe does not delay the woodcutting." Woodworking tools are categorized into power tools, pneumatic tools, and hand tools. Power tools can be divided by function into multi-function tools (multi-purpose tools) and single-function tools (such as electric planers, jigsaws, circular saws, sanders, and engravers); pneumatic tools include polishers and nail guns; hand tools can be divided into measuring tools, hand saws, woodworking planes, wood files, hand chisels, and sandpaper.

PROXXON tool types

1) Frame saw. Also known as a buck saw, it consists of an H-shaped wooden frame, twisted rope with toggles, and a saw blade. The ends of the saw blade are fixed to the frame with knobs, which can also be used to adjust the blade angle. After tightening the twisted rope, the blade is tensioned and ready for use. Frame saws are classified into coarse, medium, and fine types based on blade length and tooth pitch. Coarse saw blades are 650—750mm long, with a tooth pitch of 4—5mm; coarse saws are mainly used for cutting thicker lumber. Medium saw blades are 550—650mm long, with a tooth pitch of 3—4mm; medium saws are mainly used for cutting thin lumber or cutting tenons. Fine saw blades are 450—500mm long, with a tooth pitch of 2—3mm; fine saws are mainly used for cutting finer wood and cutting tenon shoulders. 2) Knife saw. A knife saw mainly consists of a cutting edge and a handle, and can be classified into single-sided, double-sided, and back-backed knife saws. Single-sided knife saws are 350mm long, with teeth on one side; depending on the function of the teeth, they can be divided into rip cuts and cross cuts. Double-sided knife saws are 300mm long, with teeth on both sides; typically, one side is for rip cutting and the other for cross cutting. Back-backed knife saw plates are 250—300mm long; the back of the saw is reinforced with a steel strip, and the teeth are fine, available in rip and cross cut versions. 3) Groove saw. A groove saw consists of a handle and a saw blade, with the blade being approximately 200mm long. Groove saws are mainly used for cutting grooves in wood. 4) Panel saw. Also known as a hand saw, it consists of a handle and a saw blade, with the blade being approximately 250—750mm long and a tooth pitch of 3—4mm; panel saws are mainly used for cutting wider boards. 5) Keyhole saw. The blade is narrow and long, with a pointed tip, and a length of approximately 300—400mm. Keyhole saws are mainly used for cutting small holes and slots. 6) Coping saw. Also known as a fret saw, its construction is similar to that of a frame saw, but the blade is narrower (approximately 10mm), mainly used for cutting arcs and curves. 7) Wire saw. Also known as a bow saw, it is made by bending a bamboo strip into a bow shape, with wire stretched between the ends; serrated edges are formed on the wire to perform the cutting. The wire is approximately 200—600mm long, and the saw bow is 800—900mm long. Wire saws are mainly used for cutting complex curves and openings.

PROXXON tool structure and composition

The cross-sectional shape and distribution of the pole cores vary depending on the workpiece. Common structural types of electromagnetic chucks include rectangular and circular configurations. Rectangular magnetic poles are arranged in either longitudinal or transverse patterns. Longitudinal arrangement of rectangular magnetic poles is suitable for securing larger workpieces, while transverse arrangement is suitable for securing smaller workpieces. Circular chucks are suitable for securing ring-shaped workpieces or workpieces with complex geometries. The main characteristics of standard electromagnetic chucks are: magnetic flux lines are evenly distributed across the chuck surface, magnetic attraction cannot be concentrated, and the magnetic force per unit area is relatively low; the direction of the magnetic force is perpendicular to the chuck surface and difficult to alter, generating only one type of magnetic force for workpieces with the same contact area; the point of application of the magnetic force is limited to the contact surface between the workpiece and the chuck and cannot be freely adjusted. Therefore, disadvantages during machining include low positioning accuracy, insufficient clamping force, a narrow scope of application, and low production efficiency.

PROXXON tool usage

1) When placing the diamond dressing tool holder into the collet, avoid impacting the grinding wheel surface. 2) Do not align the single-point diamond dressing tool vertically with the center of the grinding wheel; it should generally be tilted 10-15°. 3) Do not "quench" (suddenly cool) a heated dressing tool. During dry dressing, maintain sufficient interval time between dressings to allow the heated tool to cool. 4) Do not assume the grinding wheel surface is ideally flat. At the start of dressing, locate the high points on the wheel and proceed with dressing. 5) If possible, the material removal amount per dressing should not exceed 0.001 inches on the wheel radius. Excessive removal can cause premature wear and frequent breakage of the diamond dressing tool. 6) However, do not remove too little material each time. Grinding wheels used on old or less rigid machines may not require dressing. 7) Avoid staying in one position for too long during dressing. This will polish the wheel surface, generate high temperatures, and damage the diamond dressing tool. Rotate the dressing tool at least once daily. 8) Do not continue to use worn or damaged dressing tools. Adjust or replace them promptly. 9) Do not select excessive removal amounts and fast traverse speeds during rough dressing, followed by small removal amounts and slow traverse speeds during finish dressing. This will quickly damage the diamond dressing tool. If possible, it is recommended to use the same traverse speed for both rough and finish dressing.

Weidou Intelligent Technology specializes in selling German PROXXON workholding fixtures, PROXXON hydraulic tools, PROXXON power tools, PROXXON pneumatic tools, PROXXON hand tools, PROXXON electronic tools, PROXXON welding tools, PROXXON pipe tools, PROXXON explosion-proof tools, PROXXON electrical tools, PROXXON automotive maintenance tools, PROXXON fastening tools, PROXXON cutting tools, PROXXON striking tools, PROXXON grinding tools, PROXXON original German imports. Welcome customers to inquire and order.