German POLY ECLAT tools, POLY ECLAT models, POLY ECLAT prices

POLY ECLAT power tools are mechanized tools powered by electric motors or electromagnets, driving the working head through a transmission mechanism. They are hand-held tools that use low-power electric motors or electromagnets as the power source to drive the working head via a transmission mechanism. Power tools are divided into handheld and portable types. Handheld power tools are more flexible, convenient, and widely used; many varieties have become essential tools for production and daily life. There are numerous power tool brands. Based on function and application, they are mainly classified into metal cutting power tools, grinding power tools, assembly power tools, and railway power tools. Common power tools include electric drills, electric grinders, electric wrenches and electric screwdrivers, electric hammers and impact drills, concrete vibrators, and electric planers.

POLY ECLAT tool classification

1) Screwdriver: A tool used to turn screws to position them, typically with a thin wedge-shaped tip that inserts into the slot or recess of the screw head—also known as a "screwdriver". 2) Wrench: A manual tool with an open end or box end that uses leverage to turn bolts, screws, nuts, and other threaded fasteners. Wrenches usually have jaws at one or both ends of the handle; applying force to the handle allows turning the bolt or nut. Apply force along the direction of thread rotation to turn the bolt or nut. 3) Hammer: A tool used to strike objects to move or deform them. It is most commonly used to drive nails, straighten, or break apart objects. Hammers come in various forms; a common form consists of a handle and a head. One side of the head is flat for striking, while the other is the hammer head. The hammer head can be shaped like a claw (for pulling nails) or wedge-shaped. There are also round-headed hammers. 4) Test pen: Also called a voltage tester or simply "test pen". It is an electrical tool used to test whether wires are live. The pen body contains a neon bulb; if the bulb lights up during testing, it indicates the wire is live or is the live wire in a circuit. The tip and tail of the test pen are made of metal, while the pen shaft is made of insulating material. When using a test pen, you must touch the metal part at the tail end with your hand; otherwise, no circuit is formed between the live object, the test pen, the human body, and the ground, so the neon bulb will not light up, leading to a misjudgment that the live object is not energized. 5) Tape measure: A common measuring tool in daily life. Steel tape measures are frequently seen, commonly used in construction and decoration, and are a household essential. Types include fiber tape measures, leather tape measures, and waist tape measures. Luban rulers, Feng Shui rulers, and Wen Gong rulers also belong to the category of steel tape measures. 6) Utility knife: A type of knife with a sharp blade used for cutting wallpaper and similar materials, hence the name "wallpaper knife," also known as a "utility knife." It is frequently used in renovation, decoration, and signboard industries. 7) Electrician's knife: A cutting tool commonly used by electricians. A standard electrician's knife consists of a blade, cutting edge, handle, and lanyard loop. When not in use, the blade retracts into the handle. The base of the blade is hinged to the handle, featuring scale lines and markings. The front end forms a screwdriver tip, both sides have file surfaces, the cutting edge has an inwardly curved section ending in a point, and the handle has a safety button to prevent accidental blade retraction. The electrician's knife integrates multiple functions, allowing various wire connection operations to be completed with just one tool, eliminating the need to carry other tools. It offers benefits such as simple structure, ease of use, and versatility. 8) Hacksaw: Includes hand saws (for household and woodworking), pruning saws (for branch trimming), folding saws (for branch trimming), bow saws, coping saws (for woodworking), rip saws (for woodworking), and crosscut saws (for woodworking). 9) Spirit level: A spirit level contains a bubble vial and can be used to inspect, measure, and adjust whether equipment is installed level. 10) Combination pliers: Combination pliers are clamping and cutting tools consisting of a head and handles. The head includes jaws, serrated grips, cutting edges, and wire cutters. The functions of the various parts are: (1) The serrated grips can be used to tighten or loosen nuts; (2) The cutting edges can be used to strip rubber or plastic insulation from soft wires, and to cut wires and iron wires; (3) The wire cutters can be used to cut harder metal wires such as electrical wires and steel wires; (4) The insulating plastic sleeves on the pliers have a voltage resistance of 500V or higher, allowing live wire cutting. 11) Needle-nose pliers: Also called long-nose pliers, primarily used for cutting fine single-strand and multi-strand wires, bending loops on single-strand wire connectors, and stripping plastic insulation. They are also commonly used by electricians (especially indoor electricians). They consist of pointed tips, cutting edges, and handles. Electrician's needle-nose pliers have insulating sleeves rated for 500V on the handles. Due to their pointed tips, they are suitable for operations in narrow spaces. To bend wire connectors with needle-nose pliers: first fold the wire end to the left, then bend it clockwise to the right against the screw. 12) Wire strippers: Wire strippers are commonly used by indoor electricians, motor repair technicians, and instrument electricians. Their appearance is shown in the figure below. They consist of cutting edges, wire crimping slots, and handles. The handles of wire strippers have insulating sleeves rated for 500V. Wire strippers are suitable for stripping insulation from plastic and rubber insulated wires and cable cores. To use: place the wire end to be stripped into the jaw opening, squeeze the handles together, then release; the insulation will separate from the core wire.

POLY ECLAT tool structure and composition

The cross-sectional shape and distribution of the pole cores vary depending on the workpiece. Common structures of electromagnetic chucks include rectangular and circular types. Rectangular magnetic poles are arranged either longitudinally or transversely. Longitudinal arrangement of rectangular magnetic poles is suitable for securing larger workpieces; transverse arrangement is suitable for securing smaller workpieces. Circular chucks are suitable for securing ring-shaped workpieces or workpieces with complex shapes. The main characteristics of standard electromagnetic chucks are: magnetic flux lines are evenly distributed on the chuck surface, magnetic attraction cannot be concentrated, and the magnetic force per unit area is relatively small; the direction of magnetic force is perpendicular to the chuck surface and difficult to change, producing only one type of magnetic force for workpieces with the same contact area; the point of action of the magnetic force is limited to the contact surface between the workpiece and the chuck and cannot be arbitrarily changed. Therefore, machining with these chucks has disadvantages such as low positioning accuracy, insufficient clamping force, narrow scope of application, and low production efficiency.

POLY ECLAT tool operation

1) Single-phase power cords for portable electric machinery and handheld power tools must use three-core soft rubber cables, and three-phase power cords must use four-core rubber cables; when wiring, the cable sheath must pass into the equipment's junction box and be secured. 2) Before using power tools, check the following items: no cracks or damage to the housing and handles; correct and secure connection of protective grounding or neutral wires; intact cables or flexible cords; intact plugs; normal, flexible, and undamaged switches; intact electrical protection devices; intact mechanical guards; and flexible rotating parts. 3) The insulation resistance of power tools should be measured regularly using a megohmmeter with 500V. If the insulation resistance between live parts and the housing is less than 2M Ω, maintenance is required. 4) After repairing the electrical parts of power tools, insulation resistance measurement and dielectric strength tests must be performed. The test voltage is 380V, and the test duration is 1 minutes. 5) Electrical circuits connecting electric machinery and tools should have separate switches or sockets and be equipped with residual current operated protective devices; metal housings must be grounded; connecting multiple devices to a single switch is strictly prohibited. 6) The rated residual operating current of current-type residual current protective devices must not exceed 30mA, and the operating time must not exceed 0.1 seconds; the rated residual operating voltage of voltage-type residual current protective devices must not exceed 36V. 7) The operating switch for electric tools should be placed within easy reach of the operator. During breaks, after work, or in case of sudden power outage, the power supply switch should be turned off. 8) When using portable or mobile power tools, wear insulating gloves or stand on an insulating mat; when moving tools, do not carry them by the cord or rotating parts. 9) When using Class III insulated power tools in damp or acidic environments, or inside metal containers, reliable insulation measures must be taken, and a dedicated supervisor must be present. The power tool switch should be located within easy reach of the supervisor. 10) The magnetic disk surface of magnetic chuck drills should be flat, clean, and rust-free. When performing side drilling or overhead drilling, measures must be taken to prevent the drill body from falling in case of power loss. 11) When using electric wrenches, ensure the reaction torque support is firmly positioned and the nut is securely tightened before starting.

Weidou Intelligent Technology specializes in selling German POLY ECLAT workholding fixtures, POLY ECLAT hydraulic tools, POLY ECLAT power tools, POLY ECLAT pneumatic tools, POLY ECLAT hand tools, POLY ECLAT electronic tools, POLY ECLAT welding tools, POLY ECLAT pipe tools, POLY ECLAT explosion-proof tools, POLY ECLAT electrical power tools, POLY ECLAT automotive maintenance tools, POLY ECLAT fastening tools, POLY ECLAT cutting tools, POLY ECLAT striking tools, POLY ECLAT grinding tools. All POLY ECLAT products are original imports from Germany. Customers are welcome to inquire and order.