German OSBORN tools OSBORN models OSBORN prices

OSBORN tools are any tools connected to the robot edge (joint) with specific functions. This may include robot grippers, robot tool changers, robot collision sensors, robot rotary connectors, robot pressure tools, compliance devices, robot spray guns, robot deburring tools, robot arc welding torches, robot electric welding torches, etc. Robot end effectors are generally considered peripheral equipment of the robot, robot accessories, robot tools, and arm-end tools (EOA). Mechanical gripping end effectors used in industrial robots for loading and unloading are mostly two-finger claw types. Classified by finger motion, they can be divided into translational and rotational types. Classified by mechanical clamping method, they can be divided into external clamping and internal expansion types. Classified by mechanical structural characteristics, they can be divided into electric (electromagnetic), hydraulic, and pneumatic types, as well as their combinations.

OSBORN tool principles

The principle of hydraulics consists of two cylinders of different sizes filled with water or oil. Water-filled ones are called "water presses"; oil-filled ones are called "oil presses." Each cylinder contains a sliding piston. If a certain pressure is applied to the small piston, according to Pascal's law, the small piston transmits this pressure through the fluid pressure to the large piston, pushing the large piston upward. Let the cross-sectional area of the small piston be S1, and the downward force applied to the small piston be F1. Thus, the pressure exerted by the small piston on the fluid is P=F1/SI, which "can be transmitted unchanged in all directions by the fluid." The pressure received by the large piston must also equal P. If the cross-sectional area of the large piston is S2, the upward force F2=PxS2 generated by the pressure P on the large piston is a multiple of the small piston's cross-sectional area. From the above equation, applying a smaller force to the small piston results in a larger force on the large piston. Therefore, hydraulic presses are used for pressing plywood, extracting oil, lifting heavy objects, forging steel, etc.

OSBORN tool usage

1) Select appropriate saw blades according to the workpiece, for example, use 14 teeth per inch for cutting solid or thick soft metals; use 18 teeth per inch for tool steel, iron pipes, hard metals, etc.; and 24 teeth per inch are suitable for cutting metal sheets, metal pipes, and thin iron bars. 2) Push the saw forward, and lift it gently when pulling back. 3) Select wrenches of appropriate size according to the nature of the work. 4) When using an adjustable wrench, apply force towards the fixed jaw, never towards the movable jaw. 5) If the wrench jaws are worn or slip during use, do not continue using them to avoid slipping. 6) Do not use a wrench as a hammer for striking. 5. Do not add a pipe to the wrench handle to increase torque. 7) Press the inner side of the first leg of the square against the edge of the wooden board, and draw along the inner side of the second leg with a pencil to mark a perpendicular line. 8) Select appropriate screwdrivers according to the size and shape of the screw head slots. 9) Do not strike the screwdriver handle with a hammer; replace handles immediately if damaged. 10) Do not use a screwdriver as a chisel or lever. 11) Use electrician's screwdrivers for current testing; do not use general screwdrivers to test high voltage. 12) Do not grind the screwdriver tip to avoid damaging the hardened surface. 13) Do not keep screwdrivers in shirt or trouser pockets to avoid injury from collisions or falls.

OSBORN tool usage

1) Plane blade adjustment: When installing the plane blade, first fit the blade with the cap iron, control the distance between their cutting edges, and then insert it into the plane body. Bring the cutting edge close to the plane sole, add the wedge, press down slightly, hold the left corner of the plane sole with the left hand, and use the thumb to firmly hold the wedge, cap iron, and plane blade. Correct the cutting edge with a hammer so that the edge protrudes from the mouth. The amount of protrusion is proportional to the cutting depth: more for rough planing, less for fine planing. To check the protrusion, lift the plane with the left hand, sole facing up, and look backwards with one eye to observe. If the protrusion is inappropriate, tap the upper end of the blade lightly. If it protrudes too much and needs to be retracted, tap the rear end of the plane body lightly. If one corner of the cutting edge protrudes, only tap the upper side of the same corner of the blade. 2) Planing points: When planing, extend the index fingers of both hands forward to press on the plane body, press the rear part of the blade with the thumbs, and grip the handle tightly with the other fingers and palms. Keep the plane body level and apply uniform force with both hands. When pushing forward, increase the force with both thumbs, apply slight pressure with the index fingers, and gradually reduce the pressure until no pressure is applied at the front end. When retracting, lift the rear part of the plane slightly with the hand to avoid dragging the cutting edge on the wood surface, which causes dulling. When planing long materials, place the left foot forward, followed by the right foot. Before planing long materials, check whether the surface is heartwood or sapwood; generally, heartwood is cleaner and has clearer grain than sapwood. If it is heartwood, plane from the root to the tip; if it is sapwood, plane from the tip to the root. Planing along the wood grain saves effort. Otherwise, it is easy to cause "tear-out," resulting in a rough, uneven surface and requiring excessive effort. During planing, the plane sole should remain tight against the wood surface. Do not lift the front of the plane at the start, and do not lower the front at the end (commonly known as "nodding"). Otherwise, the middle part of the planed wood surface will bulge unevenly, a common mistake among beginners that must be corrected.

Weidou Intelligent Technology professionally sells German OSBORN workholding fixtures, OSBORN hydraulic tools, OSBORN power tools, OSBORN pneumatic tools, OSBORN hand tools, OSBORN electronic tools, OSBORN welding tools, OSBORN piping tools, OSBORN explosion-proof tools, OSBORN electrical tools, OSBORN automotive maintenance tools, OSBORN fastening tools, OSBORN cutting tools, OSBORN striking tools, OSBORN grinding tools, OSBORN original German imports. Welcome inquiries and orders from users.