German OMES SRL tools OMES SRL models OMES SRL prices

OMES SRL tools: Power tools are mechanized tools powered by electric motors or electromagnets, driving the working head through a transmission mechanism. They are hand-held tools using low-power electric motors or electromagnets as the power source to drive the working head via a transmission mechanism. Power tools are divided into handheld and portable types. Handheld power tools are more flexible, convenient, and widely used; many varieties have become essential tools for production and daily life. There are numerous power tool brands. According to function and application, they are mainly classified into metal cutting power tools, grinding power tools, assembly power tools, and railway power tools. Common power tools include electric drills, electric grinders, electric wrenches and electric screwdrivers, electric hammers and impact drills, concrete vibrators, and electric planers.

OMES SRL tool classification

1) Screwdriver: A tool used to turn screws to position them, typically with a thin wedge-shaped tip that inserts into the slot or recess of the screw head—also known as a "screwdriver". 2) Wrench: A manual tool with an open end or box end that uses leverage to turn bolts, screws, nuts, and other threaded fasteners. Wrenches usually have jaws at one or both ends of the handle to apply external force; applying force to the handle allows turning the bolt or nut held in the opening or socket. Apply external force along the direction of thread rotation to turn the bolt or nut. 3) Hammer: A tool used to strike objects to move or deform them. It is most commonly used to drive nails, straighten, or break apart objects. Hammers come in various forms; the common form consists of a handle and a head. One side of the head is flat for striking, while the other is the hammer head. The hammer head can be shaped like a claw (for pulling nails) or wedge-shaped. There are also round-head hammers. 4) Test pen: Also called a voltage tester pen, abbreviated as "electric pen". It is an electrical tool used to test whether wires are live. The pen body contains a neon bulb; if the neon bulb lights up during testing, it indicates that the wire is live or is the live wire of a circuit. The tip and tail of the test pen are made of metal, while the pen shaft is made of insulating material. When using a test pen, you must touch the metal part at the tail end with your hand; otherwise, because the live object, test pen, human body, and ground do not form a circuit, the neon bulb in the test pen will not light up, leading to a misjudgment that the live object is not energized. 5) Tape measure: A commonly used measuring tool in daily life. Steel tape measures are frequently seen, commonly used in construction and decoration, and are also a household essential. Types include fiber tape measures, leather tape measures, waist tape measures, etc. Luban rulers, Feng Shui rulers, and Wen Gong rulers also belong to the category of steel tape measures. 6) Utility knife: A type of knife with a sharp blade used for cutting wallpaper and similar materials, hence the name "wallpaper knife," also known as a "craft knife". Frequently used in renovation, decoration, and signboard industries. 7) Electrician's knife: A cutting tool commonly used by electricians. Ordinary electrician's knives consist of a blade, cutting edge, handle, and sheath. When not in use, retract the blade into the handle. The base of the blade is hinged to the handle, featuring scale lines and markings; the front end forms a screwdriver tip, both sides have file surfaces, the cutting edge has a concave curved blade section ending in a point, and the handle has a protection button to prevent the blade from snapping back. The electrician's knife blade integrates multiple functions, allowing various wire connection operations to be completed with just one knife without carrying other tools, offering benefits such as simple structure, ease of use, and versatility. 8) Hacksaw: Includes hand saws (household, woodworking), pruning saws (branch trimming), folding saws (branch trimming), bow saws, veneer saws (woodworking), rip saws (woodworking), and crosscut saws (woodworking). 9) Spirit level: A spirit level contains a bubble vial and can be used to inspect, measure, and debug whether equipment is installed horizontally. 10) Wire cutters: Wire cutters are clamping and cutting tools consisting of a head and handles. The head includes jaws, teeth, cutting edges, and shear blades. The functions of the various parts are: (1)) The teeth can be used to tighten or loosen nuts; (2)) The cutting edges can be used to strip the rubber or plastic insulation of soft wires, and also to cut wires and iron wires; (3)) The shear blades can be used to cut harder metal wires such as electrical wires and steel wires; (4)) The insulating plastic sleeves on the pliers withstand voltages above 500V, allowing live wire cutting. 11) Needle-nose pliers: Also called long-nose pliers, mainly used for cutting fine single-strand and multi-strand wires, bending loops for single-strand wire connectors, stripping plastic insulation, etc. They are also one of the commonly used tools for electricians (especially indoor electricians). They consist of a pointed tip, cutting edges, and handles. The handles of electrician's needle-nose pliers are covered with insulating sleeves rated for 500V. Due to the pointed head, they are suitable for operations in narrow spaces. To bend wire connectors with needle-nose pliers: first fold the wire end to the left, then bend it clockwise to the right close to the screw. 12) Wire strippers: Wire strippers are one of the commonly used tools for indoor electricians, motor repair technicians, and instrumentation electricians. Their appearance is shown in the figure below. They consist of cutting edges, wire crimping slots, and handles. The handles of wire strippers are covered with insulating sleeves rated for a working voltage of 500V. Wire strippers are suitable for stripping the insulation of plastic and rubber insulated wires and cable cores. Usage method: Place the wire end to be stripped into the cutting slot of the head, squeeze the two handles together with your hand, then release; the insulation will separate from the core wire.

OMES SRL tool maintenance

1) Correct air supply system: The intake pressure at the tool inlet (not the compressor outlet pressure) is generally 90PSIG (6.2Kg/cm^2). Pressure that is too high or too low will damage the tool's performance and lifespan. The intake air must contain sufficient lubricating oil to ensure adequate lubrication of the pneumatic motor inside the tool (place a white paper at the tool exhaust to check for oil stains; normal operation shows oil stains). The intake air must be free of moisture; using compressed air without an air dryer is inappropriate. 2) Do not arbitrarily disassemble tool parts before operation, as this affects operator safety and may cause tool damage. 3) If the tool has minor faults or fails to achieve its original function after use, do not continue using it; inspect it immediately. 4) Regularly (approximately once a week) inspect and maintain the tool, adding grease (Grease) to rotating parts such as bearings, and adding oil (Oil) to the pneumatic motor. 5) When using various tools, strictly adhere to all safety regulations and operating instructions. 6) Select appropriate tools for the job; tools that are too large can easily cause work injuries, while tools that are too small can easily lead to tool damage.

OMES SRL tool usage

1) Carefully inspect before use: ensure no external damage, flexible switch action without jamming, and intact power cords and tool housings. Use a 500V megohmmeter to measure the insulation resistance between the winding and the housing; it must not be less than O.5 megohms. See the attached table for insulation resistance values. 2) Handheld power tools with metal housings must have reliable protective grounding. The power cord should be a multi-core soft rubber-sheathed cable, with secure connections at both ends of the grounding wire. 3) Handheld power tools should be operated by dedicated personnel with professional knowledge. Strictly observe relevant safety operating procedures during use. 4) Before use, check whether related electrical and mechanical protection devices are intact and functioning normally. Also ensure that rotating parts move flexibly without jamming. 5) When using Class I handheld power tools, users must wear prescribed protective equipment and set up qualified protective gear. Take corresponding anti-electric shock safety measures as required, such as installing residual current devices (RCDs) in the power circuit, or having the user wear insulating gloves, insulating shoes, or stand on an insulating mat. When using Class II handheld power tools in damp and narrow places, install a leakage switch with a working current of less than 1.5mA and an action time of less than or equal to 0.1 seconds. The leakage switch should be placed inside the container and supervised by dedicated personnel. 6) Occupational hazards of using handheld power tools. Arm vibration disease caused by long-term hand-transmitted vibration work was listed as one of China's statutory occupational diseases as early as 1957, also known as local vibration disease, typically manifesting as episodic white finger.

Weidou Intelligent Technology specializes in selling German OMES SRL workholding fixtures, OMES SRL hydraulic tools, OMES SRL power tools, OMES SRL pneumatic tools, OMES SRL hand tools, OMES SRL electronic tools, OMES SRL welding tools, OMES SRL pipe tools, OMES SRL explosion-proof tools, OMES SRL electrical power tools, OMES SRL automotive maintenance tools, OMES SRL fastening tools, OMES SRL cutting tools, OMES SRL striking tools, OMES SRL grinding tools, OMES SRL original German imports. Welcome customers to inquire and order.