German novus tools novus models novus prices

novus tools are made of copper alloy. Due to copper's good thermal conductivity and its characteristic of containing almost no carbon, the heat generated in a short time when the tool rubs against or impacts an object is absorbed and conducted. Another reason is that copper itself is relatively soft, providing good compliance during friction and impact, making it difficult to produce tiny metal particles, so we hardly see any sparks. Therefore, explosion-proof tools are also called non-sparking tools. The materials for explosion-proof tools are beryllium bronze and aluminum bronze. Beryllium bronze alloys and aluminum bronze alloys do not spark upon impact or friction, making them very suitable for manufacturing safety tools used in explosive, flammable, strong magnetic, and corrosive environments. BeA-20C alloy withstands an impact energy of 561IJ in hydrogen containing 30% or in methane-air-oxygen mixtures containing 6.5-10%, undergoing 20 impacts without sparking or ignition.

novus tool classification

1) Electric planer: One of the main tools used in woodworking and renovation. It is mainly used for planing smooth surfaces of various woods. Products include short planers and rough planers. Rough planers are mainly used for planing smooth surfaces of straight wood and can process larger board surfaces; short planers, in addition to planing board surfaces, can be used with various guides to plane tongues, borders, and grooves. The main features of using a handheld electric planer are small size, light weight, portability, and ease of use. Compared with manual tools, it can greatly reduce labor intensity and improve processing efficiency and quality. When using a handheld electric planer, hold the handle at the rear of the planer body with your right hand and slightly raise the center of gravity of the rear part. After starting the power with your left hand, hold the guide handle at the front of the planer, keeping the center of gravity of the front part lower. Follow the operation sequence where the front part of the planer contacts the wood first. When the rear part of the planer steadily contacts the planing surface, push the planer body forward smoothly in the direction of planing with both hands. After the planer body completes the planing stroke, lift the front part of the planer with your left hand, then pick it up with both hands and return to the starting point for the next pass. Repeat this until all planing is completed. 2) Jigsaw: Also known as electric coping saws or electric fine saws. It is a multifunctional cutting tool that can cut wooden boards, as well as perform straight or curved cuts on plastic and metal sheets. It is particularly effective for cutting complex shapes and geometric figures with small radii of curvature. It is an essential multifunctional sawing tool for home renovation and various public interior decoration projects. It features light weight, small size, portability, simple operation, and wide application range. Its cutting principle involves a narrow saw blade with teeth facing upward. During operation, the blade moves in a linear reciprocating motion up and down to cut, completing various sawing tasks according to size requirements. If used with a guide plate, it can also perform angled bevel processing. When using an electric jigsaw, for smaller and thinner wooden boards, fix them on a workbench first and support the workpiece with your left hand. Then, hold the saw handle with your right hand and slowly push forward for sawing. Apply steady and uniform force during operation; do not apply excessive force to avoid injury or damage to the blade. For larger boards, ensure the board is securely fixed, then hold the saw handle with both hands and push forward for sawing. Follow the line during sawing and always keep the blade perpendicular to the board surface to prevent binding or deviation. 3) Circular saw: Also known as a small handheld circular saw. It is a new type of small handheld electric saw equipped with a spring-loaded automatic safety guard and an electronically controlled constant-speed motor. It features simple operation, flexible use, quick adjustment, and safe reliability, making it very suitable for home renovation tasks such as cutting various wooden boards and fiberboards. The thickness of wood or boards being cut should generally be below 60mm. 4) Sanding tools: Also known as small handheld grinders. They are mainly used for sanding bare wood before painting various wood veneers, and can also be used for sanding putty surfaces. However, sanding putty generates significant dust, which seriously pollutes the environment, so enhanced labor protection is required during operation. Handheld grinders include belt sanders and orbital sanders. Belt sanders are mainly used for rapid sanding of wooden components and products, while orbital sanders are commonly used for sanding large areas such as wooden floors in home renovations. 5) Small router: Also known as a groove planner or trimmer. It can be used for grooving, tenoning, drilling, edging, milling, and trimming on various wooden products and components. It can also be used for simple edging, milling, grooving, and trimming on light metal materials such as aluminum alloy and plastic steel, such as aluminum alloy (or plastic steel) doors and windows, balcony frames, and furniture frames. Therefore, it is also one of the commonly used power tools in modern home renovation projects.

novus tool usage

1) Rip cutting: When sawing, place the wood on a bench. Step on the wood with your right foot, keeping it perpendicular to the cut line. Stand straight with your left foot at an angle of 60° to the cut line. Keep your right hand perpendicular to your right knee. It is appropriate for your body to form an angle of approximately 45° with the cut line. Lean your upper body slightly forward and allow slight movement, but do not lean backward or lunge sideways. When sawing, hold the saw with your right hand and position your left thumb against the blade for guidance. Gently pull and push the saw a few times (pull first, then push) to start the kerf. Once the cut is started, remove your left hand from the edge of the saw. When the teeth have penetrated the wood by about 5mm, use your left hand to assist your right hand in lifting and pushing the frame saw. Lift the saw lightly, raising the sawing hand slightly; push the saw with more force, applying coordinated effort from your wrist, elbow, shoulder, and waist in a rhythmic manner. This ensures the saw blade advances along the cut line. Otherwise, the edge of the rip-cut wood will be curved or uneven, or the cross-section of the kerf will be inconsistent. 2) Crosscutting: When sawing, place the wood on a bench. Stand to the rear left of the wood. Hold the wood with your left hand and the saw with your right hand. Step on the wood with your left foot. The pulling method is the same as for rip cutting. When using a frame saw, tilt the lower end of the blade forward. For rip cuts, tilt the upper end of the blade backward at an angle of approximately 75° to 90° relative to the wood surface. For crosscuts, tilt the blade backward at an angle of approximately 30° to 45°. Always ensure the blade advances along the line without deviation. Keep the kerf straight; do not allow the blade to sway left or right, which causes skewing. When the wood is nearly severed, stabilize the offcut with your left hand and reduce the sawing speed. Continue until the wood is completely severed. Do not leave any material uncut to be broken off by bending or snapping, as this can damage the saw blade and cause the wood to split along the grain, compromising quality.

novus tool types and features

Hydraulic tools include: hydraulic wrenches, dedicated electric pumps for hydraulic wrenches, hydraulic jacks, hydraulic bolt tensioners, hydraulic flange spreaders, hydraulic nut splitters, hydraulic pullers, etc. Hydraulic tools offer the advantages of high efficiency and convenience. 1) Generally use mineral oil as the working medium. The relative moving surfaces are self-lubricating, resulting in a long service life. 2) Light weight, small size, low movement inertia, and fast response speed. 3) Various hydraulic transmission components can be arranged conveniently and flexibly according to needs. 4) Automatic overload protection can be achieved. 5) Convenient operation and control, enabling wide-range stepless speed regulation (speed regulation range up to 2000:1). 6) Linear motion is easily achieved. 7) Machine automation is easily realized. When adopting electro-hydraulic combined control, not only can a higher degree of automatic control be achieved, but remote control is also possible.

Weidou Intelligent Technology specializes in selling German novus workholding fixtures, novus hydraulic tools, novus power tools, novus pneumatic tools, novus hand tools, novus electronic tools, novus welding tools, novus pipe tools, novus explosion-proof tools, novus electrical tools, novus automotive maintenance tools, novus fastening tools, novus cutting tools, novus striking tools, novus grinding tools. All novus products are original imports from Germany. We welcome inquiries and orders from customers.